![]() |
![]() |
|
|
||||||
|
DIY: Do It Yourself
Post here to share or improve your wrench turning skills! All BMW E46 DIY tips, tales, and projects discussed inside. Learn to work on your car and know the right BMW parts you will need! |
![]() |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Registered User
|
eMirror DIY with pics and Vid
Ok i purchased this module for my car a few months back and got sent the wrong one and had to return it for a e46 instead of a e39 module, I recieved it today and fitted it.
Overall time taken: 30 mins Difficulty: medium Ok 1st I got the kit out the jiffy envelope and read instructions Then I got some tools (screwdrivers, pliers, cutters,) and went out to the car 1st remove glove box by opening it and removing 6 screws, 3 along front edge and 2 behind the straps that hold it from dropping down and 1 on bottom of glove box underside When I had removed glovebox and dropped it down to bottom of the footwell I could see all this I then had to remove the middle plug on the main module pictures here with red arrow Disconnected the plug and removed its casing by sliding a small screwdriver down into its clip seperated clip into two sides, both sides had numbers showing pin number for each side I then installed the supplied clips onto 3 wires as follows Pin 10 brown/black cable Pin 47 red/violet cable Pin 9 white/red/yellow cable I then plugged in the 3 cables from the module into the clips brown on module = brown/black red on module = red/violet white on module = white/red/yellow I then reassembled plug and connected it back where it came from I had a sneaky look at whats inside the module and found one side just has a chip and the other has various resistors and diodes looks a bit complicated but I guess could be copied
__________________
![]() Quaife LSD ATB Diff : 19" CSL Reps : Black Kidney Grills : M3 Front Bumper : Xenoflo HID kit 6k Cross Drilled Discs with Ultimate Pads : Smoked Front And Sides : Cosmos CAI kit : Xenon Interior Bulbs TMS Adjustable Rear Camber Arms : M Style Weighted Short Shift Knob : Shadow 330i Emblems M3 Autofold Mirrors : CNL remap : Emirror Module : OEM Bluetooth retrofitted |
|
|
|
|
|
#2 |
|
Registered User
|
Next up I had to remove this plug and its casing
I added two crimp connectors onto pin 12 and pin 1 from this plug and reasembled plug housing and plugged back in Last picture shows the module and all its wires plugged in, the module sits in one of the empty slots and the wires i've tucked away underneath I reasembled the glove box and tested it and took a video
__________________
![]() Quaife LSD ATB Diff : 19" CSL Reps : Black Kidney Grills : M3 Front Bumper : Xenoflo HID kit 6k Cross Drilled Discs with Ultimate Pads : Smoked Front And Sides : Cosmos CAI kit : Xenon Interior Bulbs TMS Adjustable Rear Camber Arms : M Style Weighted Short Shift Knob : Shadow 330i Emblems M3 Autofold Mirrors : CNL remap : Emirror Module : OEM Bluetooth retrofitted |
|
|
|
|
|
#3 |
|
Registered User
|
excellent writeup!
|
|
|
|
|
|
#4 |
|
Registered User
|
im a little confused...this is to enable the motorized mirrors to go up when you lock the car? or is this for the windows to go up when you press the lock button?
__________________
![]() |
|
|
|
|
|
#5 |
|
Registered User
|
Its just for the mirrors to go up and down when you lock and unlock the car, the video shows me using the total closure (oem feature) as I had to close the car up as i was finished inside
__________________
![]() Quaife LSD ATB Diff : 19" CSL Reps : Black Kidney Grills : M3 Front Bumper : Xenoflo HID kit 6k Cross Drilled Discs with Ultimate Pads : Smoked Front And Sides : Cosmos CAI kit : Xenon Interior Bulbs TMS Adjustable Rear Camber Arms : M Style Weighted Short Shift Knob : Shadow 330i Emblems M3 Autofold Mirrors : CNL remap : Emirror Module : OEM Bluetooth retrofitted |
|
|
|
|
|
#6 |
|
Registered User
|
European 330's have folding mirrors??!!!
|
|
|
|
|
|
#7 |
|
Registered User
Join Date: Oct 2006
Location: Woodland Hills < SFV < LA < SoCal
Posts: 27,175
My Ride: 2001 3 Pedal M54b30
|
no, he has oem m3 autofolding mirrors.
damn i wish we could have the remote window closure on US models. |
|
|
|
|
|
#8 |
|
Registered User
Join Date: Dec 2006
Location: Chestermere, Alberta, Canada
Posts: 1,842
My Ride: Velvy B.
|
Nicely done.
__________________
| There is no replacement for Displacement | Go Big or Go Home | ![]() |
|
|
|
|
|
#9 |
|
Registered User
|
damn euros. lOL
nice job
__________________
|
|
|
|
|
|
#10 |
|
Registered User
|
|
|
|
|
|
|
#11 |
|
Registered User
|
No, US is auto open only. I wonder if you can have ECU flashed for that?
|
|
|
|
|
|
#12 |
|
Registered User
|
|
|
|
|
|
|
#13 | |
|
Registered User
Join Date: Mar 2008
Location: Vero Beach FL.
Posts: 2,113
My Ride: 99 328i. ZSP, ZPP,
|
Quote:
P.S Bleach rules, if thats your youtube channel.
__________________
![]() 1999 328i Sport Package, Premium Package, 5 speed, Alpine white. |
|
|
|
|
|
|
#14 |
|
Registered User
|
Where did you bought this module? Any website?
|
|
|
|
|
|
#15 | |
|
Registered User
|
I really don't like the m3 mirrors thats the only reason I can't do this mod
__________________
Quote:
|
|
|
|
|
|
|
#16 |
|
Registered User
|
Any chance of getting the photos back up?
__________________
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|