![]() |
![]() |
|
|
||||||
|
The Tire Rack's Tire & Wheel Forum
Use this forum to discuss anything in relation to wheels to tires to offsets. Sponsored by The Tire Rack |
![]() |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Manwhore
|
Will i have problems with Nittos and UUC springs?
well i put on iforge wheels and the rears are 19x9 with a +44 offset i believe. And on them i have Nittos 265/30/19
Well im rubbing of course. I plan to roll my fenders this saturday but what if thats not enough to clear the UUC springs drop? I mean i did a search and everyone who is running this wheel setup all have coils and just raise the back up if needed. I cant. Looks really close huh....
__________________
![]() |
|
|
|
|
|
#2 |
|
Obey my dog
|
my rears are 9.5 with 265 nittos. i am dropped on an eibach pro-kit which is slightly less drop than yours in the back (1.0" vs. 1.2"). I was rubbing orginally only when i had 3 or more people in the car. i had my fenders rolled and now i don't rub at all
|
|
|
|
|
|
#3 |
|
Manwhore
|
Did you have a system in the trunk before you rolled?
__________________
![]() |
|
|
|
|
|
#4 |
|
Obey my dog
|
i didn't before and unfortunately i still don't :sad:
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|