DIY Facelift Coupe Angel Eyes

Originally Posted by konfetaz

Hello, so still we need put in oven? And i dont understand why? :/ Thank you

if you have a FACELIFT coupe then yes, because your headlights are sealed.

^ all headlights are sealed. that's how they keep water out. the difference is whether they use glue or clips

Originally Posted by Fedor1

Thanks for the diy. Very very helpful.

Looks good!

Originally Posted by konfetaz

Hello, so still we need put in oven? And i dont understand why? :/ Thank you

Like it has been said before, you need to get the glue softened up..

You can use the oven or a heat gun, I don't know anything about using one though

hello friends i am new on this forum and i come from poland i want sorry for my english isnt good

i got the same car BMW E46 325 ci 2004 year
and i dont know to which light i must connect my rings i got the US light version in europe version the rings connect to sidelihts please help
Best regards to all Fanatics cris

since you have the US version, just follow the wiring link in the first post. it will tell you what to do

yes i study that instruction but i got different my rings ccfl 7500k package dont have elements from last 4 picture you say about this link http://www.fastm.com/m3/angeleyes.html
you mount rings to your car i think to connect my rings to passing lights but in that situation my rins glow only when i ride. i want glow rings on a side lights too
grrr that us light version in europe is very difficult option please help me

what are you missing? the wiring for all angel eyes are basically the same.

i dont have shorter harness to passenger side, longer harness to driver side battery terminal ,5 amper fuse all elements from last picture of package
in europe car version angel eye connect to sidelights only and thats it
thats why i dont have elements from last picture i think in poland cant buy this wiring
best regards cris

oh, just find the wiring harness on ebay. you can also buy it from sponsors here. EAS should have that harness

ok now i look on wiring in poland if i cant find i ask sponsors
Big thanks for help
Best Regards Cris

Hey guys i got my facelift coupe 04' plate 318ci M Sport Black 2 weeks ago and i have already gone mad modifying it. i have debadged the lump on the back all my badges have been changed to carbon fiber the kidney grilles have been changed to black shadow and i finished my angels today....i thought.

I followed the guide which by the way is excellent! but i used a heat gun rather than the oven. When heating the black plastic and wedging it apart with a screwdriver i ended up slightly remoulding it but this isn't the worst part......when i sealed everything back up i found that i left smudge marks in the lense so this means i have to separate everything again and the in headlight there's condensation the question is will it come apart if i reheat without damaging the headlight?

Also how does everyone's headlight fit in underneath the trim where the headlight washer and the bumper is. is there a gap so you can put finger between it slighty?


Thanks appreciate the help!

Hello, i'am trying to buy Predator Orion V2 LED Angel Eyes 04-06, but for start wanna know is there any discount code for umnitza?
Thank you

Originally Posted by dips2

Hey guys i got my facelift coupe 04' plate 318ci M Sport Black 2 weeks ago and i have already gone mad modifying it. i have debadged the lump on the back all my badges have been changed to carbon fiber the kidney grilles have been changed to black shadow and i finished my angels today....i thought.

I followed the guide which by the way is excellent! but i used a heat gun rather than the oven. When heating the black plastic and wedging it apart with a screwdriver i ended up slightly remoulding it but this isn't the worst part......when i sealed everything back up i found that i left smudge marks in the lense so this means i have to separate everything again and the in headlight there's condensation the question is will it come apart if i reheat without damaging the headlight?

Also how does everyone's headlight fit in underneath the trim where the headlight washer and the bumper is. is there a gap so you can put finger between it slighty?

Thanks appreciate the help!

I have gaps all around but not so big.. on of my headlights is slightly more in, and I have a larger gap on one side and not the other..

Originally Posted by konfetaz

Hello, i'am trying to buy Predator Orion V2 LED Angel Eyes 04-06, but for start wanna know is there any discount code for umnitza?
Thank you

No idea of coupon codes, haven't really shoped from them.. But you can either, "Ask a sponsor," look out for Sponsor deals, or wait till somebody will part out their EEs and sell them for a lower price..

Ok, best ways to wire the Angel Eyes [Predator ORION V2 60LED]? i found 2 of them: http://www.fastm.com/m3/angeleyes_orionv2.html

does anyone know how to wire the angel eyes so u can turn it off and on using your car key? thanks

as in the interior tap? or using the key as a switch?

Ok today i got from umnitza angel eyes predator orion v2 for facelift coupe.



For start u need this drill:



Then u need make this on silver big circle:






And this on where angel eyes must fit:





Then your angel eyes harness will be in good place.





UPDATED....




Now next part, u will need some "super moment' or other glue....



Then take glue and take a walk around the big silver circle with it:



Then leave for some 10mins...


To be continued...

you're not supposed to use super glue lol. well i hope it works fine for you. if not, you will know why.

lol why noT?

Hey Leo are your headlights aftermarket 6000K or the OEM Philips bulbs??