E46 BMW Social Directory E46 FAQ 3-Series Discussion Forums BMW Photo Gallery BMW 3-Series Technical Information E46 Fanatics - The Ultimate BMW Resource BMW Vendors General E46 Forum The Tire Rack's Tire Wheel Forum Forced Induction Forum The Off-Topic The E46 BMW Showroom For Sale, For Trade or Wanting to Buy

Welcome to the E46Fanatics forums. E46Fanatics is the premiere website for BMW 3 series owners around the world with interactive forums, a geographical enthusiast directory, photo galleries, and technical information for BMW enthusiasts.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   E46Fanatics > Tuning & Tech > Bavarian Soundwerks' Mobile Electronics Forum

Bavarian Soundwerks' Mobile Electronics Forum
Have all your A/V and electronics questions answered here. Ipods, A/V, Radar Detectors Oh My!
Sponsored by Bavarian Soundwerks

 
 
Thread Tools Search this Thread Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 01-15-2010, 07:16 PM   #1
Orion329
Registered User
 
Join Date: Jun 2007
Location: Chicago, IL
Posts: 480
My Ride: MKV GTI
Speaker and Carputer Installation. Pics.

Take a look and see if this helps you out...

The following is a brief compilation of images that record the series of steps I took in installing new component speakers, two subwoofers, two amps, and eventually a carputer. I had previously documented my speaker and amp install here.

Thanks to all of you on e46fanatics.com for helping me bring this project to life.

The Speaker Installation:

Since I started off simply wanting to upgrade the stock 10-speaker setup, I installed two pairs of Infinity Kappa 60.9cs speakers as well as the Infinity Kappa Four amplifier. Clean and simple.


This was the original installation of the crossovers and amp. The amp location was chosen to avoid any excess space consumption and keep it cool.


Front Speaker Installation:



The only effective way to cleanly install speakers in the front doors is to mount them to the metal body, not the interior trim panel.



No rattles made the work worthwhile.



There’s a lot of ways to mount the tweeters, but since they create very little movement, I went with a simple application of some Dynamat to keep them in place.


Rear Speaker Installation:



I wanted to save some money by not purchasing a bracket, but also ensure a very solid mounting point for the rear speakers, So I used some ˝” hardwood to create these horseshoe brackets. Here’s the link to the extensive write-up I did on that part of the install: DIY: 6.5” Rear Deck Speaker Mounting



The install left no room for rattles in the back.



A lot of people will recommend getting coaxial speakers in the back, or mounting the tweeters near the woofers, but since I hadn’t read too much into it and wanted to give my passengers the ability to hear the high notes clearly, I prepped the rear doors to hold my tweeters.



By luck my tweeter’s diameter was a near perfect fit for a very snug install in the existing mounting holes.


Subwoofer Installation:



I eventually decided that even though the bass response was good with the upgraded speakers, I needed more—but not too much more. I found a pair of 8” subwoofers (JL 8W3v3-4) that fit the bill to be paired pretty well with the Infinity Kappa One amplifier (I wanted the trunk install to look very clean, so buying an amp that matched aesthetically was key.) The subs small depth and their custom matched grills made them a good choice for the small enclosure I wanted.



I was happy with the bass I got from the two speakers, but after removing a rear deck speaker to allow the bass to get to the cabin, I decided to try to find a way to get rid of some of the bass isolation I was getting in my e46. I popped out the ski pass and put some holes in the front façade. They’re hardly visible, but seem to augment the sound transmission a bit.



The size and design of the box allowed for me to easily access the full-sized spare I have as well as remove them quickly and easily with the use of two large thumbscrews at the top.
Orion329 is offline   Reply With Quote
Ads by Google

Guests, get your FREE E46Fanatics.com membership to remove this ad.
 

Tags
carpc, carputer, computer, diy, double din

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Censor is ON





All times are GMT -5. The time now is 06:26 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use