E46 BMW Social Directory E46 FAQ 3-Series Discussion Forums BMW Photo Gallery BMW 3-Series Technical Information E46 Fanatics - The Ultimate BMW Resource BMW Vendors General E46 Forum The Tire Rack's Tire Wheel Forum Forced Induction Forum The Off-Topic The E46 BMW Showroom For Sale, For Trade or Wanting to Buy

Welcome to the E46Fanatics forums. E46Fanatics is the premiere website for BMW 3 series owners around the world with interactive forums, a geographical enthusiast directory, photo galleries, and technical information for BMW enthusiasts.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   E46Fanatics > Tuning & Tech > DIY: Do It Yourself

DIY: Do It Yourself
Post here to share or improve your wrench turning skills! All BMW E46 DIY tips, tales, and projects discussed inside. Learn to work on your car and know the right BMW parts you will need!

Thread Tools Search this Thread Rating: Thread Rating: 47 votes, 4.89 average. Display Modes
Prev Previous Post   Next Post Next
Old 04-01-2010, 03:06 PM   #1
Registered User
Join Date: Nov 2008
Location: Westchester, NY
Posts: 6,331
My Ride: 335xi Deep Sea Blue
Send a message via ICQ to delmarco Send a message via Yahoo to delmarco
Cool Restore Your Scratched BMW E46 Console to Factory New for only $6! Pictorial DIY

So after my last retrofit project of installing the DCT Sport Shifter, I found that the new knob made the rest of my console look extra old and worn. My console cubby doors had the usual BMW rubber coating peeling and scuff marks from years of use.
So I went online and found that these things are about $50 (used on ebay) to $150 (brand new at BMW dealership) to replace.

I also came across many DIYs that showed folks using black spray paint on the doors and a few showing the scrubbing off of the worn out rubber coating completely to reveal the bare plastic underneath. I also saw other suggestions for plasti-dip and a DIY for using plasti-dip on the cupholders/armrest.

So long story short I became interested and got a can of Plasti-Dip at my local Home Depot for $5.98 (the paint/home/hardware sections at your local Kmart, Walmart, Target, Sears, etc... will have this or else go find it at Autozone, Pepboys, or any good Hardware store ) and I proceeded to do this DIY.

So far the Black color is the only color that Plasti-Dip seems to come in and I do wish they had BMW hellbeige/tan, or even gray for our non-black cupholders center armrest console sections.

This DIY is easy and the results are astonishing and makes you wonder why people buy these trim pieces out of Salvage Cars for tons of money to replace their worn ones when just a $6 can of Plasti-dip will make the trim new again.

The only tools I used were a razor blade and scotch tape that I found around my apartment. Screw driver and a T10 will aslo be needed to remove the trim pieces. I also used fine 150 grit sand paper on my steptronic plate trim, but found it was not necessary if your trim isn't super pitted and you are using more than 2 coats.

The most important tool will be your patience. Plasti-Dip takes a long time to dry-even when it feels dry to the touch-it will be moist and soft for up to 4-5 hours after the last coat goes on and your final coat will easily scratch and scuff if you rush to put it back in your car.

Also waiting 30 full minutes or more between coats is highly recommended. Don't ask me how I learned all this but I learned it the hard way.

Said and done, if you do mess up and the coating comes out wrong you can easily peel the coat right off and start over again. Plasti-Dip isn't super permanent like paint but more like liquid rubber.

Start by removing your console trim and gear plate. This is basic 101 DIY but the pictures below should prevent you from running into any surprises.

NOTE: If the pictures don't all load here is the link to the album:

Last edited by delmarco; 04-01-2010 at 03:27 PM.
delmarco is offline   Reply With Quote
Ads by Google

Guests, get your FREE E46Fanatics.com membership to remove this ad.

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Censor is ON

All times are GMT -5. The time now is 11:51 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
(c) 1999 - 2016 performanceIX Inc - privacy policy - terms of use