New Anyone in Denver Thread

HAHAHHAAH... JAraiza is getting grilled

Always teaming up on the ones who are far away. I got you when I get back.

yeah teaming up... mfm.... wait... that wouldn't work

whoa.... jrazalannnn....... we don't needz no mmm!!!!!

I do remember a certain debt you owe me. You'd think you'd pick the side of the light when you owe the JAraizabert Bank of LoanZ. :speee:

EEEEEEEEEEEEEEEEEEEK

Bahhaha. I didn't have any comeback

IZ not goodt at cumbackz

YOU CAN CATCH ME ON THA SPEED TRAIN
beeper in a 3-way
SHININ' WITH DA GLEAMCHAIN
and you honey givin' me brain

these children learn from cigarette burns, fast cars, fast women and cheap drinks...

:eepskeet:

Ryan, I sent you a PM, but you probably didn't get this one either. Stupid messages. Just wondering if you got the Hoosier tires and the 2nd trunk yet?

Hola amigos

Adam you'll be fine running the spacers as long as you used the bolts that came with them. If you need any help rolling fenders let me know and we'll have a fender rolling partay (I think Azzy mentioned he wanted to do a little more work on fenders) Speaking of fenders I did some fender/bumper work while the car was up and now no more rubbing in the rear

Rich what do you possibly need 2 trunks for?

I'm new and in Denver. (Downtownish) I just had the dreaded cooling system blowout and have started to replace everything that is commonly problematic at this age. (115k, bought it new.)

I am going to be needing someone to install struts & springs and lower control arms and poly bushings.
I don't know anything about suspensions and I'm not confident in my ability to do it right. I have the parts (most of them, anyhow) but need a shop that will install customer supplied parts.

Thanks in advance for any help/advice.

Welcome! If you don't mind learning there are a few of us that would be willing to help you with the install. If not there are several shops.

Peak Eurosport (Wheatridge)
SCR Performance (Loveland)
Autosport Werkes (Broomfield)

I know there's more I just can't remember.

I have no idea what 95% of the crap that comes out of your guyses mouths is even remotely supposed to mean.

Rich, I have the Hoosiers (tires, not the other guys) and one Vorsteiner trunk currently in my possession, I did get your last PM too.

spee

I just wanted to inform you all, I think I've finally decided which wheels I'll be going with for keepers down the road. This is the look that makes me



The BBS's pictured above run for $550 a piece new and the 18x8.5's weigh 25.5lbs

So these are my answer;



they're made by Bremmer Kraft and the 18x9's are $160 each and weigh 23.6lbs, they also come in 18x8 but a weight is not listed. Anyway, what do ya think?

I personally have always liked the looks of those BBS wheels, i just never could bring myself to buy them because of the weight.

Originally Posted by delirium45

I personally have always liked the looks of those BBS wheels, i just never could bring myself to buy them because of the weight.

Yeah, the weight is a deal breaker

Originally Posted by Brandond11

Hola amigos

Adam you'll be fine running the spacers as long as you used the bolts that came with them. If you need any help rolling fenders let me know and we'll have a fender rolling partay (I think Azzy mentioned he wanted to do a little more work on fenders) Speaking of fenders I did some fender/bumper work while the car was up and now no more rubbing in the rear

That would be great!

Originally Posted by 02m3csl325

I just wanted to inform you all, I think I've finally decided which wheels I'll be going with for keepers down the road. This is the look that makes me

The BBS's pictured above run for $550 a piece new and the 18x8.5's weigh 25.5lbs

So these are my answer;



they're made by Bremmer Kraft and the 18x9's are $160 each and weigh 23.6lbs, they also come in 18x8 but a weight is not listed. Anyway, what do ya think?

Damn...that is a hellofadeal. I like CH's a lot but those are pretty spot on.