|
|
|
|
||||||
|
General E46 Forum
This is the place to get answers, opinions and everything you need related to your E46 (sedan, coupe, convertible and wagon) BMW! |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
05-07-2010, 01:24 PM
|
#1 |
|
Registered User
|
PS Fluid Flush
i got 133K on the clock n steering wheel is kinda heavy. i checkd the fluid and it is OLD... how do i go about flushing it
__________________
|
|
|
|
05-07-2010, 02:26 PM
|
#2 |
|
Registered User
|
Well if you want a true flush you might need to go to a shop, what I did was get a 20 cc syringe or use a turkey baster and suck out all the old fluid then fill with new. Do this 2 or 3 times about 300 miles intervals.
__________________
 BMWCCA member #407674___________ -Joshua ZHPMafia.com member Ebay headers | 3.38 diff | 2.5" cat-less exhaust | K&N intake | AA stage 1 software | UUC stage 1 light flywheel and clutch | UUC Evo 3 ssk |
|
|
|
|
05-07-2010, 02:36 PM
|
#3 |
|
Registered User
|
just take the hose off the lowest most point and let it all drain out. Replace the fitting with a hose clamp, then fill it full of new fluid, bleed it out and you good.
__________________
 MysterT Huntington Beach, CA |
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
