|
|
|
|
||||||
|
The Tire Rack's Tire & Wheel Forum
Use this forum to discuss anything in relation to wheels to tires to offsets. Sponsored by The Tire Rack |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
06-25-2010, 05:31 AM
|
#1 |
|
Registered User
Join Date: Oct 2008
Location: China/La Jolla, CA
Posts: 159
My Ride: Clown Shoe/M3vert
|
Will these e9x TE37 fit non-m sedan?
Hi all, I have a 325i e46 sedan. I got these Volk Racing TE37s. They are 19 inches. Front is 8.5 et35 and rear is 9.5 et35. I am planning to do 235/35 and 265/30 because there is not much option for 225/35+255/35. I have aftermarket Adjustable Rear Control Arms for a camber of -3.0.
May I ask, Will these rub? with or without that much negative camber? Much thanks |
|
|
|
06-25-2010, 11:36 AM
|
#2 |
|
Registered User
|
With that camber I'd run no wider than a 245/35/19 in the rear.
__________________
 Gottalovethexi: thx for the old p-chopped sig | BBS CH | FK coils | RE Bushings/Mounts | K&N Intake | ZHP box/no resonators | | 330i brakes | FX-R + Orion V4 | Full Exterior LED kit | JL Audio in trunk | |
|
|
|
|
06-28-2010, 11:58 AM
|
#3 |
|
Sponsor
|
With -3 camber and a rounded 245, you should be able to pull it off with rolled fenders. I recommend looking into Toyo T1R tires for the rounded side wall characteristic.
-Charles@VMRWheels
__________________
Kevin @ VMR | Wheels
Tel: 714-442-7916 | Email: kevin.a@velocitymotoring.com  Facebook! | Flickr! | Blog! |
|
|
|
|
| Tags |
| camber, fitment, te37, tire, wheel |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
