|
|
|
|
||||||
|
Suspension & Braking
Have some questions about suspension or brake setups for your E46 BMW? Get all your answers here! |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
11-16-2010, 03:24 PM
|
#1 |
|
Registered User
|
Need help figuring out what brake system i have
i have aftermarket front 6 piston calipers on my e46 m3 and need brake pads. The problem is i cant seem to find out what system i have installed. it has brembo stickers on it but doublt they brembos. i purchaced brembo pads and they did not fit. My car has been sitting and awaiting the pads. Any help is appreciated.
|
|
|
|
11-16-2010, 06:19 PM
|
#2 |
|
Registered User
Join Date: Jan 2008
Location: Ridgeland, MS
Posts: 5,345
My Ride: ZHP Custom Stage 3.5
  |
On the Caliper is there any Imprint or anything of Brembo? If so, there should be some part # on the Caliper. I haven't seen a caliper like that.
 You can get some Custom Pads from this Company Called Porterfields. They will make a Custom Pads and Rotors for your BBK. I would send them a Pad for a Sample to replicate. They can also help identify what caliper it is as well if there is a pad for it. -TrippinBimmer Edit: Looking at this BBK Combo some more... I think they are the F-Carbon BBK for the M3, but I might be Wrong. If it is. Parts are not available for the Kit and will have to go Custom Route.
__________________
..::|TrippinBimmer's Boost Build with Cool Parts|::.. 4**whp/3**tq SAE Corrected Last edited by TrippinBimmer; 11-16-2010 at 10:55 PM. |
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
