OEM Xenon not working after angel eye install
Yesterday I installed umnitza led angel eyes on my 06 zhp and they look great but now my drivers side oem xenon bulb isn't working. so I tried replacing the
bulb still nothing. So I plugged my drivers side headlight into the passenger side wiring harness to see if it would work and it worked with no problem so i thought it has to be a wiring issue on the drivers side since the drivers side headlight was working while it was connected to the passenger side harness. Just to make sure it was wiring i plugged in the passenger side headlight into the drivers side wiring harness and it worked perfectly. WTF? So i then put the headlights back into the right spots and once again the drivers side headlight didn't work. the turn signal works but no xenon. I wiggled the wiring harness for like 20 min with nothing then they came on. so i started the car and the light went out again. I'm still thinking its a wiring issue but i don't understand why the passenger side headlight would work on the drivers side with no problem and vice versa. Please Help!!!