rubbing issue please help!!!

thegeneral · 05-30-2011, 01:43 AM

i have a facelift 330ci lowered on hotchkis springs, factory struts and shocks. I am running 19x10 in the back and 19x9 in the front i have issues with it rubbing when i hit a bump..What are my options to stop the rubbing? already rolled my fenders i do have 12mm spacers also in the rear i need this rubbing to stop its annoying PLEASE LET ME KNOW!!!

Jall · 05-30-2011, 02:56 AM

Uh, take the spacers out?
Dremel the stud holding the rear bumper clip and the guard liner where the rear bumper meets the guard.
It all depends on where you're rubbing.

BartenderPlease · 05-30-2011, 11:51 AM

find where it is rubbing dude........then go from there

VMRWheels · 05-31-2011, 02:45 PM

If you're rubbing in the rear it could be caused partially by the fact that you're running a spacer. If you remove that (assuming you have enough inner clearance) you have a better chance of not rubbing. What are the wheel and tire specs?

Knowing where you're rubbing will also help a great deal.

05-30-2011, 01:43 AM	#1
thegeneral Registered User Join Date: May 2009 Location: berwick maine Posts: 87 My Ride: 330ci View My Garage	rubbing issue please help!!! i have a facelift 330ci lowered on hotchkis springs, factory struts and shocks. I am running 19x10 in the back and 19x9 in the front i have issues with it rubbing when i hit a bump..What are my options to stop the rubbing? already rolled my fenders i do have 12mm spacers also in the rear i need this rubbing to stop its annoying PLEASE LET ME KNOW!!!

05-30-2011, 02:56 AM	#2
Jall Registered User Join Date: Oct 2008 Location: Emerald, vic Posts: 868 My Ride: 328Ci View My Garage	Uh, take the spacers out? Dremel the stud holding the rear bumper clip and the guard liner where the rear bumper meets the guard. It all depends on where you're rubbing. __________________ Flickr

05-30-2011, 11:51 AM	#3
BartenderPlease Registered User Join Date: Sep 2006 Location: Charleston Posts: 8,801 My Ride: 328i Sport View My Garage	find where it is rubbing dude........then go from there __________________ Gottalovethexi: thx for the old p-chopped sig \| BBS CH \| FK coils \| RE Bushings/Mounts \| K&N Intake \| ZHP box/no resonators \| \| 330i brakes \| FX-R + Orion V4 \| Full Exterior LED kit \| JL Audio in trunk \|

05-31-2011, 02:45 PM	#4
VMRWheels Sponsor Join Date: Sep 2004 Location: Anaheim, CA Posts: 8,966 My Ride: 1:25 Scale Enzo View My Garage	If you're rubbing in the rear it could be caused partially by the fact that you're running a spacer. If you remove that (assuming you have enough inner clearance) you have a better chance of not rubbing. What are the wheel and tire specs? Knowing where you're rubbing will also help a great deal. __________________ Kevin @ *VMR* \| Wheels Tel: 714-442-7916 \| Email: kevin.a@velocitymotoring.com Facebook! \| Flickr! \| Blog!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: