[The Aggressive Wheel Thread] - Page 505

Brandyn. · 06-29-2011, 04:52 PM

whats with the headlight trim it looks sick

m3 guy · 06-29-2011, 04:59 PM

Quote:

Originally Posted by Slammed_E46

whats with the headlight trim it looks sick

Thanks, had ///OSS do that for me since I liked it so much on his car.

Brandyn. · 06-29-2011, 05:12 PM

Quote:

Originally Posted by m3 guy

Thanks, had ///OSS do that for me since I liked it so much on his car.

what was done to it im lost

what makes ur front end different than a normal m's

david @ eas · 06-29-2011, 06:47 PM

Can we play?

d'ray18 · 06-29-2011, 08:10 PM

Quote:

Originally Posted by VMRWheels

That's a really nice looking G8. Wow!

+1, yeah that G8 is killing it, look at those fenders

, I've always admired these when I see on the road.

D.Rieder · 06-29-2011, 08:25 PM

Quote:

Originally Posted by david @ eas

Can we play?

I'm guessing that's the Evasive/Voltex Evo in the back?

choleaoum · 06-29-2011, 09:40 PM

So I got bored at home today while cleaning my wheels, and I put a 10.5 inch rim in the front for shits and giggles.

I have 19x8.5/10.5 iforged senekas (i'm getting another set 9.5/11 so ill have a total of two hehe) but has anyone here ran a 10.5? it actually looked pretty damn good. a 5-10mm spacer fixed the rubbing issue. My car is a lot lower but it was still on a floor jack lol.

Just repolished the rims, they were curbed the hell. The most curbage I've ever seen in my life. (exaggeration)

bimmerchop · 06-29-2011, 09:40 PM

Gottalovethexi · 06-29-2011, 10:12 PM

^wow, not fair that i don't have one.

TwoFastFurYa · 06-29-2011, 10:45 PM

Quote:

Originally Posted by choleaoum

So I got bored at home today while cleaning my wheels, and I put a 10.5 inch rim in the front for shits and giggles.

I have 19x8.5/10.5 iforged senekas (i'm getting another set 9.5/11 so ill have a total of two hehe) but has anyone here ran a 10.5? it actually looked pretty damn good. a 5-10mm spacer fixed the rubbing issue. My car is a lot lower but it was still on a floor jack lol.

Just repolished the rims, they were curbed the hell. The most curbage I've ever seen in my life. (exaggeration)

Can you post some side shots, and rear shots please? Im lovin those wheels...Would like to see full shots please

Tonk · 06-30-2011, 12:52 AM

Quote:

Originally Posted by m3 guy

Thanks for posting those, I appreciate it

It must make you smile every day knowing that you have one of the sickest M3's ever.

choleaoum · 06-30-2011, 02:23 AM

Quote:

Originally Posted by TwoFa****rYa

Can you post some side shots, and rear shots please? Im lovin those wheels...Would like to see full shots please

Haha I'll get right on it, I didn't take a side shot of the 10.5 in the front because I was in a rush to rebuild my rims. I put the 8.5 back in the front and 10.5 in the rear and repolished the rims. Going to repolish the face when I find new barrels.

So far, the 10.5's will fit in the front won't poke that crazy either. And I'm planning to upgrade the 8.5 to an 11, the rims are a 2pc so it's a pain in the ass. I'd have to buy a outter and inner barrel and turn them into a 3pc to make it fit nice. Or find a 2pc barrel that's ready lol.

Also, just did more research and they are iForged Triumphs, although I do have a set of senekas coming in real soon.

Here they are curbed up

Here they are after hours of polishing and sanding

Pulled into my driveway on my bike and that **** literally was blinding the crap out of me.

bigrodrigo · 06-30-2011, 02:30 AM

So Lowww · 06-30-2011, 09:10 AM

Quote:

Originally Posted by choleaoum

So I got bored at home today while cleaning my wheels, and I put a 10.5 inch rim in the front for shits and giggles.

That has to be one high offset 10.5 so sit like that

Quote:

Originally Posted by bimmerchop

Annnnnnnnnnnnnnnnnnnnnnnnnnnnnddddd this thread is now over

Yes I quoted all the pics, so worth it.

330i ZHP · 06-30-2011, 09:15 AM

damn m5 hotness - love them long time

330i ZHP · 06-30-2011, 09:16 AM

oh yea, and that Porsche is what made my school boy dreams...everyone else lusted for the Countach...I lusted for FAT bodied Porsches, BMWs, Mercedes...etc...

So Lowww · 06-30-2011, 09:28 AM

Quote:

Originally Posted by 330i ZHP

oh yea, and that Porsche is what made my school boy dreams...everyone else lusted for the Countach...I lusted for FAT bodied Porsches, BMWs, Mercedes...etc...

Oh so you like them thick huh

choleaoum · 06-30-2011, 10:47 AM

^ The offsets aren't that high on the 10.5's the darkest pic I posted was the rims mounted in the rear. It tucks right under the quarter panel if I eliminate some camber.

iForged doesn't release the offsets and unfortunately I didn't measure it before I put them back on I only test fitted. Not like it matters, I'm rebuilding them to have an even bigger lip.

eas · 06-30-2011, 11:44 AM

Quote:

Originally Posted by D.Rieder

I'm guessing that's the Evasive/Voltex Evo in the back?

That's the brian @ eas Voltex Evo.

alexbenz · 06-30-2011, 01:13 PM

are those hamann wheels on the e39?

06-29-2011, 04:52 PM	#10081
Brandyn. Registered User Join Date: Jan 2011 Location: Atl Posts: 284 My Ride: Slow, but Low View My Garage	whats with the headlight trim it looks sick __________________

06-29-2011, 06:47 PM	#10084
david @ eas Sponsor Join Date: Mar 2008 Location: SoCal Posts: 4,253 My Ride: E46 M3 View My Garage	Can we play? __________________ David ///M \| eas david@europeanautosource.com web: www.europeanautosource.com tel 866.669.0705 x33 \| ca: 714.369.8524 Blog \| YouTube \| facebook \| twitter \| flickr

06-29-2011, 09:40 PM	#10087
choleaoum Ceiling missing! Join Date: Jan 2010 Location: Long Beach, CA Posts: 1,567 My Ride: BMW 330Ci View My Garage	So I got bored at home today while cleaning my wheels, and I put a 10.5 inch rim in the front for shits and giggles. I have 19x8.5/10.5 iforged senekas (i'm getting another set 9.5/11 so ill have a total of two hehe) but has anyone here ran a 10.5? it actually looked pretty damn good. a 5-10mm spacer fixed the rubbing issue. My car is a lot lower but it was still on a floor jack lol. Just repolished the rims, they were curbed the hell. The most curbage I've ever seen in my life. (exaggeration) __________________ Ernie Fixmer Madness - Check it out for custom fabrication work. Last edited by choleaoum; 06-29-2011 at 09:42 PM.

06-29-2011, 09:40 PM	#10088
bimmerchop Registered User Join Date: Apr 2002 Location: CT Posts: 11,007 My Ride: spins 4 View My Garage	__________________ - Rich - Flickr - Stage 3+ TiAL B5 S4 "A turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster." - Jeremy Clarkson euro.techniks EPL \| TiAL \| SDR \| APR \| Stratmosphere \| 034 \| ASP \| SPEC \| Fidanza \| STaSIS \| H-Sport \| AWE \| H&R \| StopTech \| BBS

06-29-2011, 10:12 PM	#10089
Gottalovethexi Registered User Join Date: Jul 2005 Location: Jersey Posts: 8,611 My Ride: 03 xi & 72 Bav View My Garage	^wow, not fair that i don't have one. __________________ Ryan \| flickr \| ULTIMATE KLASSE -

06-30-2011, 02:30 AM	#10093
bigrodrigo Registered User Join Date: Jun 2011 Location: poland Posts: 2 My Ride: e38 View My Garage

06-30-2011, 09:15 AM	#10095
330i ZHP Registered User Join Date: Mar 2005 Location: Washington, DC Posts: 20,526 My Ride: have 5 doors and FI View My Garage	damn m5 hotness - love them long time __________________ /_________\ OO=[][]=OO

06-30-2011, 09:16 AM	#10096
330i ZHP Registered User Join Date: Mar 2005 Location: Washington, DC Posts: 20,526 My Ride: have 5 doors and FI View My Garage	oh yea, and that Porsche is what made my school boy dreams...everyone else lusted for the Countach...I lusted for FAT bodied Porsches, BMWs, Mercedes...etc... __________________ /_________\ OO=[][]=OO

06-30-2011, 10:47 AM	#10098
choleaoum Ceiling missing! Join Date: Jan 2010 Location: Long Beach, CA Posts: 1,567 My Ride: BMW 330Ci View My Garage	^ The offsets aren't that high on the 10.5's the darkest pic I posted was the rims mounted in the rear. It tucks right under the quarter panel if I eliminate some camber. iForged doesn't release the offsets and unfortunately I didn't measure it before I put them back on I only test fitted. Not like it matters, I'm rebuilding them to have an even bigger lip. __________________ Ernie Fixmer Madness - Check it out for custom fabrication work. Last edited by choleaoum; 06-30-2011 at 10:50 AM.

06-30-2011, 01:13 PM	#10100
alexbenz Registered User Join Date: May 2004 Location: L.A, palos verdes Posts: 4,344 My Ride: E30, Es300 View My Garage	are those hamann wheels on the e39? __________________ W210-----SOLD E39----------Present www.europrojektz.com Current line up........lexus es300, e39, e30---sold Your not a baller until you got a engine in the Rear... How did i fail Women Studies? "I Love Biatches"

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread: