The best Cold Air Intake System.

This sale has ENDED but feel free to send me a PM if you are interested, chances are that we will still honor the sale price for you. If not, we can work something out!

Like the thread title suggests, this CAI System is currently the BEST on the market for the below models. Featuring the highest HP/Torque gains for a CAI on the market, plain and simple.



So, what makes this system so special?

A true cold air intake system relocates the filter outside of the engine compartment to deliver the coldest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders, this tuning allows you to deliver large power gains.

This CAI is very similar to the popular "Dinan Tube Style CAI". The Injen CAI went a couple steps further when compared to Dinan however. The Injen system not only includes a Heat-Shield, but also features a full replacement of the OEM upper intake boot providing less flex and more consistent air flow. You also have a choice of two different finishes, polished aluminum or gloss black.









Applications

1998-2000 BMW 323 (E46)
1998-2000 BMW 328 (E46)
2001-2006 BMW 325 (E46) does not fit 325 models that are equipped with the M56 engine.
Sadly Injen hasn't manufactured this intake for the 330 models yet, in the near future we will be putting together a list of potential buyers and will stress to Injen that a system for the 330 should be manufactured.





Benefits

-Straight up, this intake system is currently the best system on the market for 323,325,328 models. Featuring a superior build quality, throttle response and power gains in both horsepower and torque.

-This system includes the following: Aluminum upper intake boot, Heat-Shield, Intake Pipe, High Performance Air Filter, All the needed Hardware, Detailed installation Manual and an HID Ballast Relocation Kit (if needed)

-Replaces your flimsy rubber intake boot with an aluminum intake tube, providing more consistent air flow

-A heat shield is included to block out engine heat

-The air filter is located outside of the engine compartment, truly providing cold air

-Maximum power gains with the race grade Tube Style construction

-Available in 2 finishes, polished aluminum (seen above) or a sleek glossy black finish

-Made in the U.S.A.










HydroShield Pre-Filter

Injen Technology's HYDRO-SHIELD PRE-FILTERS are a race proven material manufactured from highly durable polyester. Uniform micron openings allow the filtering of debris .005" or larger. The HYDRO-SHIELD PRE-FILTERS are factory treated using an embedded hydrophobic process, which offers consistent airflow, water repellency and maintains horsepower gains.





Benefits

-Keeps the air filter free of debris and unwanted particles

-Easy installation, slips right over the air filter

-Increases the air filter's life

-Doesn't sacrifice horsepower or torque

-Available in 3 colors: Black, Blue and Red



List price of the above parts
$431+ Shipping

Your price for the above parts
$303 SHIPPED



To redeem your coupon simply add both the Injen CAI and the Pre-Filter to you cart. Then, proceed to step 2 of our checkout system and enter the following coupon code:

Coupon Code: InjenFSFP


CLICK HERE

Sweet deal!

Originally Posted by CWest22

Sweet deal!

Thanks for the orders guys!

Now you will know what to tell people when they ask "What is the best intake?"



Here is what the Black version looks like:

wish it came for a 330!!!!!! would buy it in an instant! (hint hint, you should talk to them and see if they will make them)

Originally Posted by cardsfan007

wish it came for a 330!!!!!! would buy it in an instant! (hint hint, you should talk to them and see if they will make them)

"Sadly Injen hasn't manufactured this intake for the 330 models yet, in the near future we will be putting together a list of potential buyers and will stress to Injen that a system for the 330 should be manufactured."

Ordered the gloss black one!

dang too bad my m56 uses the 330 size intake lol

mmmhmmmm....

Originally Posted by CWest22

mmmhmmmm....

That was quick!

Looks good

id rather go with the dinan cai. But injen is not bad too, only if i was still in the jdm scene....

Originally Posted by superbmwy2k

id rather go with the dinan cai. But injen is not bad too, only if i was still in the jdm scene....

Any reason in particular? Injen products are made in the U.S.A. and this intake surpasses the Dinan intake.



The Gloss Black version looks pretty darn clean, I can see where the polished aluminum version can be "JDM Style" though.

Need one for the m3!

i like the gains but the heat box needs to be a little better designed. i like K&N's design. with the molding.

Originally Posted by NaZty NaZe One!

i like the gains but the heat box needs to be a little better designed. i like K&N's design. with the molding.

I agree, the heat shield leaves a little to be desired. Its a great system though, and I like the solid upper tube to smooth out the incoming air flow. However, keep in mind that the K&N sits up high in the engine bay and needs the better shield; in the case the injen, its just a little extra "insurance".

Originally Posted by BeMyWhip

I agree, the heat shield leaves a little to be desired. Its a great system though, and I like the solid upper tube to smooth out the incoming air flow. However, keep in mind that the K&N sits up high in the engine bay and needs the better shield; in the case the injen, its just a little extra "insurance".

True, the reason why K&N's heat shield is more elaborate is due to the filter being so close to the engine. When Dinan designed their "Tube Style" intake system, they didn't even feel a need for a heat shield at all.

How much hp would this add to a 325i?

not CARB legal?

Originally Posted by Bimmekid91

How much hp would this add to a 325i?

We have seen gains of up to 10 RWHP from Tube Style intakes on the M54. Injen dyno tested the system on a 328i and got a gain of 6 RWHP.

Originally Posted by B_Cyrus

not CARB legal?

The system is CARB legal.

Quoted from the instruction manual that is included in the kit:

"This intake system was Dyno-tested with an Injen filter and
Injen parts, the use of any other filter or part will void the
warranty and CARB exemption number"

this intake works amazing...I have one used for sale.. look the classifieds or pm me.