FS: Vinyl car/roof/etc wrapping material - Blow out

don, do you have enough satin black to do a full wrap on a 135i? i get my vinyl from a local supplier but noticed your price on the satin might be a little better than what i am getting here. if you do pm me a quote for a satin black if not available than for matte white, also feel free to send me some pictures of the green vinyl.

PM me price for a roll of satin enough to do the roof of a e46 coupe shipped to 43004. Thanks

PM sent.

-Don

Still have enough satin to do a car? If so could u pm me a quote shipped to 18020

bump

Please PM me the shipped price for one sheet of gloss and one sheet of matte black, enough to wrap a e46 m3 roof shipped to 21144 please! Along with your paypal address.

PM sent.

I've had quite a few requests for tinting tail lights recently, so I decided to post up some more pictures of them for you guys. The owner of this car was actually a firefighter at a station local/right down the street from me in Irvine, so I dropped by there to tint/smoke the tail lights and the top portion of the headlights on his black E60 550i.

Tinted/smoked left side, stock/untinted right side:




Both sides tinted:


Top portion of the headlights tinted/smoked:




-Don

donathon@gmail.com

This guy came down to me in Orange County from norcal with his white E92 M3 to have me vinyl wrap his roof in the 3M di-noc carbon fiber material. His car came with the sunroof option, so he didn't have the factory carbon fiber roof.











-Don

donathon@gmail.com

I worked on this black Bentley GT Continental coupe a while back. He brought his car by to have me black out the chrome window trim on his car. Originally he was going to go with gloss black, but once he got here we decided to go with the matte black to still give the covered pieces some contrast with the rest of the car. Also wrapped the chrome accents that were along the bottom of the car and his door handles. He was around Mission Viejo or so and came out to me in Anaheim Hills/Orange County.

Before:




After:














-Don

donathon@gmail.com

Any special tools or spray you need to put on these vinyl?

How much for gloss black roof for e90? Would cf price differently?

Sent from my best phone on earth using Bimmer

PM sent.

One of my previous customers that had me vinyl wrap the roof on his 335i E92 sold his car and got a new car. He purchased the new limited edition matte black C63 coupe from Mercedes. Everything looked good on the car, except for the chrome window trim that blatantly stood out, especially against the matte black paint on the rest of the car. It's not often that I get a matte black car that comes in to have their window trim vinyl wrapped. He decided to go with gloss black for the window trim, to give it some contrast still, and I think it turned out great.

Before:




After:








-Don

donathon@gmail.com

I'll try and change things up a bit here. Here's a silver Honda Civic that came by to get his roof wrapped in my matte black vinyl material versus gloss black which most people usually go with. This will help others who have a silver car or a glass sunroof and want to see what a matte black vinyled roof would look like on their car and how it contrasts, etc. The owner of this car was from Irvine/Orange County as well.

Before:




After:








Blacked out the chrome trunk handle piece on the rear:


-Don

donathon@gmail.com

does the gloss black easily scratch up with washes n such? Could you pm me a price for a roof wrap on my 330i sedan and window trim in gloss black or satin?

How much to wrap the roof or a e46 2000 328i 4 door

Sent from my PC36100 using Bimmer

Originally Posted by calialx1

does the gloss black easily scratch up with washes n such? Could you pm me a price for a roof wrap on my 330i sedan and window trim in gloss black or satin?

It'll show swirls/scratches more, due to the nature of gloss or black finishes in general. However, I haven't had anyone tell me that it that they experienced any out of the ordinary wearing.

You'll be fine. Did you need materials only I am assuming? If so, shoot me a PM.

Originally Posted by e46cslsedan

How much to wrap the roof or a e46 2000 328i 4 door

Sent from my PC36100 using Bimmer

What finish? Shoot me a PM.

Hey can you pm me a price to do my interior trim pieces in either carbon fiber or satin. Thanks
Sent from Bimmer App

PM sent.

Do you still have enough for a roof and door exterior pillars for an e46 sedan? Im local too! thanks

Yes. Shoot me a PM what finish you wanted.

Trying to gauge if there is any interest in this flat black vinyl finish. I haven't posted pictures of this finish/material before, but I recently had a someone ask if I had something that was flatter than my matte black vinyl material. So, who's interested?

Flat black is on the left and matte black is on the right:




-Don

donathon@gmail.com