VMR Wheels - Picture Gallery! If you have em, POST EM!

Hey sup everyone.. I wanna post my car's pic sometime soon.. But still looking for tires.. Just wondering. I have the vmr v710 19x8.5 square setup.. But would like to do thicker tires in the rear if possible.. Was thinking of doing 235/35 19 front then 245/35 or 30 19 in the rear.. Can anyone give me an advise pls.. Ty..

Originally Posted by Eforthysick

Hey sup everyone.. I wanna post my car's pic sometime soon.. But still looking for tires.. Just wondering. I have the vmr v710 19x8.5 square setup.. But would like to do thicker tires in the rear if possible.. Was thinking of doing 235/35 19 front then 245/35 or 30 19 in the rear.. Can anyone give me an advise pls.. Ty..

Ty,

I cannot guarantee that 245/35's in the rear will not have rubbing issues, but I have seen members run that set up in the past. However, since you do have a square wheel set up, you might as well just run a square tire set up so that you can rotate the wheels.

Thankbyou.. Ill probably do tht.. What about using spacers to make the rear look staggered?

^ mmmmmmmmmm... Amazing photo skills.

Originally Posted by Eforthysick

Thankbyou.. Ill probably do tht.. What about using spacers to make the rear look staggered?

You could do that, but I would suggest waiting until the wheels are on the car and measuring the gap between the fender and the wheel to determine the correct size of spacer.

More I took today....VMR I will take better hi res pics this weekend and in your inbox they go! Btw I have 19x8.5 fronts and 19x9.5 rear running 225/255 tires

Just got these ready to mount!
18x8.5 et 35 235/40/18
19x9.5 et45 265/35/18






Will post some pics hopefully tomorrow of them mounted when i get a chance

Stupid question??? 600 posts and I am a noob when it comes to suspension.
I ordered Tein S springs am I going to have rubbing issues? (sedan)
When I get an alignment is the camber adjustable with stock setup?(dont think so)
What should I expect when I run this setup. Any info to help a noob is appreciated



Killing time at work using BimmerApp

Originally Posted by BMW323iWhite

Just got these ready to mount!
18x8.5 et 35 235/40/18
19x9.5 et45 265/35/18






Will post some pics hopefully tomorrow of them mounted when i get a chance

Stupid question??? 600 posts and I am a noob when it comes to suspension.
I ordered Tein S springs am I going to have rubbing issues? (sedan)
When I get an alignment is the camber adjustable with stock setup?(dont think so)
What should I expect when I run this setup. Any info to help a noob is appreciated



Killing time at work using BimmerApp

In the front you will most definitely have rubbing...it will be a super bouncy ride.I have tein s techs- you will need to replace your factory shocks ASAP! they will blow soon if they have not already...be careful for dips in the road the rebound and compression on the front with the tein s techs and stock struts will cause rubbing for sure.- I have bilstein sports all around and it's perfect.

Originally Posted by AE46fanaticlol

In the front you will most definitely have rubbing...it will be a super bouncy ride.I have tein s techs- you will need to replace your factory shocks ASAP! they will blow soon if they have not already...be careful for dips in the road the rebound and compression on the front with the tein s techs and stock struts will cause rubbing for sure.- I have bilstein sports all around and it's perfect.

Ok so you no longer rub with the bilstein sports? Were you able to adjust camber? Or is it not adjustable with stock setup? The reason I ask is my rear camber is already quite a bit on non sport setup, and I am worried that when I drop itll be too much? Sorry for all the noob questions, I have searched but cant seem to quite get answers I am looking for.

Originally Posted by BMW323iWhite

Ok so you no longer rub with the bilstein sports? Were you able to adjust camber? Or is it not adjustable with stock setup? The reason I ask is my rear camber is already quite a bit on non sport setup, and I am worried that when I drop itll be too much? Sorry for all the noob questions, I have searched but cant seem to quite get answers I am looking for.

I do not rub with the sports and its not a bad ride at all. The actual ride will be fine for your springs...just bouncy normal cruising all that good stuff...but if you wanna have a little fun drive a little hard...the faster you go the more bouncy it's gonna be and all down hill from there... look out for dips/drops while even driving normal that's where you will rub just be careful driving on the springs...save up for some new shocks/struts and you'll be good to go!

Originally Posted by AE46fanaticlol

More I took today....VMR I will take better hi res pics this weekend and in your inbox they go! Btw I have 19x8.5 fronts and 19x9.5 rear running 225/255 tires

Pictures look great! Can't wait to see those Hi-res pics.

Originally Posted by BMW323iWhite

Just got these ready to mount!
18x8.5 et 35 235/40/18
19x9.5 et45 265/35/18






Will post some pics hopefully tomorrow of them mounted when i get a chance

Stupid question??? 600 posts and I am a noob when it comes to suspension.
I ordered Tein S springs am I going to have rubbing issues? (sedan)
When I get an alignment is the camber adjustable with stock setup?(dont think so)
What should I expect when I run this setup. Any info to help a noob is appreciated

Killing time at work using BimmerApp

With the 265/35/18s on the rear you may also run into a slight rubbing issue. If anything, they would need a slight roll.

Now hurry up so that we can see pictures of them mounted!

Oops I spotted a typo on my behalf....I have 18s not 19s!

Black Sapphire Metallic E46 M3 on 19" Gunmetal V705s

Just a couple quick shots for now sorry for iphone quality and car is dirty
I think it looks great!
Tein springs and Koni shocks on the way as well as mtechII bumper
Will post more pics after a proper shoot!





Killing time at work using BimmerApp

Originally Posted by VMRWheels

Pictures look great! Can't wait to see those Hi-res pics.



With the 265/35/18s on the rear you may also run into a slight rubbing issue. If anything, they would need a slight roll.

Now hurry up so that we can see pictures of them mounted!

Fender roller lined up for suspension install


Killing time at work using BimmerApp

Originally Posted by BMW323iWhite

Just a couple quick shots for now sorry for iphone quality and car is dirty
I think it looks great!
Tein springs and Koni shocks on the way as well as mtechII bumper
Will post more pics after a proper shoot!
[IMG]http://img.tapatalk.com/ce4b6985-e408-20b9.jpg[IMG]




Killing time at work using BimmerApp

Definitely looks good. Love the storm trooper look. Should look great with a drop and the M-tech bumper.

Originally Posted by VMRWheels

Definitely looks good. Love the storm trooper look. Should look great with a drop and the M-tech bumper.

Thanks. A lot of people here on the forum feel black rims are played out but I say no!!! Love it


Killing time at work using BimmerApp

I personally dislike black wheels for one reason: when I've taken friends who know nothing about cars to shows and they see most black wheels, they've asked me why they're missing their hubcaps. Kinda awkward haha.

BimmerApp wut

For a 2005 330i ZHP Sedan what would be an aggressive set up in 18" VB3's or possibly 710's?? Tires i'd be using are Yokohama S.Drives Front 225/40/18, Rear 255/35/18.

Car is slammed on KW v.2's

Here's a pic for reference of the ride height I keep the car at:

I was thinking about getting some VB3's or V710's but I don't know how they would look with just a facelift bumper. I don't want it to end up looking bad. Do you guys have any pictures?