.::|Active Autowerkes Stage "TrippinBimmer" 330i ZHP Supercharged Street/Show Car|::. - Page 11

TrippinBimmer · 04-27-2012, 01:04 AM

Quote:

Originally Posted by Activ3

Mine has a little play, but not enough to cause any strange noises.

I would say mine moves about 1-3mm when idling. I guess it was unusual for me to see it move as my hydro didn't do it...

-Trip

bigjae1976 · 04-28-2012, 08:44 AM

Tensioner is bad if there is too much slack in the belt or if the pulley doesn't turn freely. I'd also check your other pulleys to see if they spin freely...that can cause the tensioner to move excessively.

TrippinBimmer · 04-29-2012, 07:16 PM

Swap plugs today and saw Plug 6 was DAMP

The new Plugs I swapped in is NGK 4091 non resistor type plug and heat range is 7. The Connections on the Coils is Fine and the ground as well. I will have to recheck the seat on the DME and Injectors as well.

-Trip

xixixi · 04-29-2012, 08:29 PM

Is it possible you are willing to post dollars per hp when this thread is done? It's great to get an idea of what hp is costing the community! It would be great information on the topic of what mods are the best bang for your buck!

bigjae1976 · 04-30-2012, 07:35 PM

News?

xixixi · 04-30-2012, 07:38 PM

Quote:

Originally Posted by bigjae1976

News?

China

bigjae1976 · 04-30-2012, 07:39 PM

Political prisoner??? No internet?

xixixi · 04-30-2012, 07:43 PM

Quote:

Originally Posted by bigjae1976

Political prisoner??? No internet?

China is a SOB, I bet he is too busy checking in at the local police station!!

China is no joke, they want to know where, when, why, how, etc. Us checks ya at the border and doesn't givafuk.

TrippinBimmer · 05-01-2012, 03:56 AM

Quote:

Originally Posted by xixixi

China

Quote:

Originally Posted by bigjae1976

News?

Not a whole lot. Just wash the car and gave it a good cleaning

Gotta reset my CEL and go from there.

-Trip

bigjae1976 · 05-01-2012, 02:07 PM

Quote:

Originally Posted by TrippinBimmer

Not a whole lot. Just wash the car and gave it a good cleaning

Gotta reset my CEL and go from there.

-Trip

Because it will run better if the car is clean

Good luck!

Jim Murphy · 05-01-2012, 03:31 PM

Been messing with the software to clear CEL's for months now . . . slowly but surely it gets better.

Jim

bigjae1976 · 05-01-2012, 10:55 PM

Must clear the adaptations.

TrippinBimmer · 05-25-2012, 05:57 AM

Quote:

Originally Posted by bigjae1976

Must clear the adaptations.

I have unplugged the battery from the Car for about 3 weeks. I wont be back in Ms until 1-2 more weeks. I have a few cars I need to work on in Tx before I head back. e30 need A/C for the 6 hour trip back, friend need some CCV and Intake Boot maintenance done on his ride and another Black-Out Vortech v2 S/C Project.

-Trip

TrippinBimmer · 06-09-2012, 01:27 AM

Reset Code Today and Started her up. NO CEL

I will have to move some pipes around. I believe that is why I feel some extra vibs at idle.

-Trip

Steven747 · 06-11-2012, 08:33 PM

so when are we going to get those dyno numbers filled in your sig?

TrippinBimmer · 06-11-2012, 08:43 PM

Quote:

Originally Posted by steven747

so when are we going to get those dyno numbers filled in your sig?

After, I get my New Valve Body for the Tranny, New Tranny Software, 3" Custom Exhaust with Cut-Outs and install my M3 rear end. I have to do some minor mods and the s/c install will be complete and hopefully running well. Parts should be here Wednesday.

-Trip

Steven747 · 06-11-2012, 09:13 PM

Quote:

Originally Posted by TrippinBimmer

After, I get my New Valve Body for the Tranny, New Tranny Software, 3" Custom Exhaust with Cut-Outs and install my M3 rear end. I have to do some minor mods and the s/c install will be complete and hopefully running well. Parts should be here Wednesday.

-Trip

most of your driving is in the city? what is your rev limit at? i could only imagine your 1st and 2nd gear at wot will be worthless

TrippinBimmer · 06-11-2012, 09:26 PM

Quote:

Originally Posted by steven747

most of your driving is in the city? what is your rev limit at? i could only imagine your 1st and 2nd gear at wot will be worthless

Mostly Highway and some city. Rev Limit is at 6850. Since, I have an auto 1st and 2nd is not useless.

-Trip

Steven747 · 06-11-2012, 09:51 PM

Quote:

Originally Posted by TrippinBimmer

Mostly Highway and some city. Rev Limit is at 6850. Since, I have an auto 1st and 2nd is not useless.

-Trip

completely forgot about auto.. it'll be like kpengs car lol. dosent he have a 3.91 or something thats crazy. can't wait for that dyno. 350 whp thats daily drivable day in and out would be ideal for me .. hopefully your at 350

TrippinBimmer · 06-11-2012, 09:52 PM

Quote:

Originally Posted by steven747

completely forgot about auto.. it'll be like kpengs car lol. dosent he have a 3.91 or something thats crazy. can't wait for that dyno. 350 whp thats daily drivable day in and out would be ideal for me .. hopefully your at 350

Will be nothing like Kpeng's car.

-Trip

04-29-2012, 07:16 PM	#203
TrippinBimmer Registered User Join Date: Jan 2008 Location: Ridgeland, MS Posts: 5,347 My Ride: ZHP Custom Stage 3.5 View My Garage	Swap plugs today and saw Plug 6 was DAMP The new Plugs I swapped in is NGK 4091 non resistor type plug and heat range is 7. The Connections on the Coils is Fine and the ground as well. I will have to recheck the seat on the DME and Injectors as well. -Trip __________________ ..::\|TrippinBimmer's Boost Build with Cool Parts\|::.. 4whp/3tq SAE Corrected \| Active Autowerke \| BimmerBrakes \| VMR Wheels \| ..::\| TrippinBimmer's New Project : 1988 e30 325e \|::..

06-09-2012, 01:27 AM	#214
TrippinBimmer Registered User Join Date: Jan 2008 Location: Ridgeland, MS Posts: 5,347 My Ride: ZHP Custom Stage 3.5 View My Garage	Reset Code Today and Started her up. NO CEL I will have to move some pipes around. I believe that is why I feel some extra vibs at idle. -Trip __________________ ..::\|TrippinBimmer's Boost Build with Cool Parts\|::.. 4whp/3tq SAE Corrected \| Active Autowerke \| BimmerBrakes \| VMR Wheels \| ..::\| TrippinBimmer's New Project : 1988 e30 325e \|::..

06-11-2012, 08:33 PM	#215
Steven747 OEM ///Member Join Date: Aug 2010 Location: Orange County, CA Posts: 4,164 My Ride: 05 330ci View My Garage	so when are we going to get those dyno numbers filled in your sig? __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

04-28-2012, 08:44 AM	#202
bigjae1976 Registered User Join Date: Dec 2003 Location: Earth Posts: 11,395 My Ride: A car View My Garage	Tensioner is bad if there is too much slack in the belt or if the pulley doesn't turn freely. I'd also check your other pulleys to see if they spin freely...that can cause the tensioner to move excessively.

04-29-2012, 08:29 PM	#204
xixixi Banned User Join Date: Aug 2009 Location: St Louis, MO Posts: 3,011 My Ride: 01 330x-xi View My Garage	Is it possible you are willing to post dollars per hp when this thread is done? It's great to get an idea of what hp is costing the community! It would be great information on the topic of what mods are the best bang for your buck!

04-30-2012, 07:35 PM	#205
bigjae1976 Registered User Join Date: Dec 2003 Location: Earth Posts: 11,395 My Ride: A car View My Garage	News?

04-30-2012, 07:39 PM	#207
bigjae1976 Registered User Join Date: Dec 2003 Location: Earth Posts: 11,395 My Ride: A car View My Garage	Political prisoner??? No internet?

05-01-2012, 03:31 PM	#211
Jim Murphy Registered User Join Date: Mar 2009 Location: Atlanta (Dunwoody), GA Posts: 452 My Ride: 2006 E46 330Ci ZHP View My Garage	Been messing with the software to clear CEL's for months now . . . slowly but surely it gets better. Jim

05-01-2012, 10:55 PM	#212
bigjae1976 Registered User Join Date: Dec 2003 Location: Earth Posts: 11,395 My Ride: A car View My Garage	Must clear the adaptations.