![]() |
![]() |
|
|
||||||
|
Forced Induction Forum Sponsored by Active Autowerke
Discuss supercharging, turbocharging and even nitrous and water injection here. Sponsored by Active Autowerke |
![]() |
|
|
Thread Tools | Search this Thread |
Rating:
|
Display Modes |
|
|
#1 |
|
Registered User
|
buying a used HPF M3
Just thought i would share my experience with buying a used HPF e46 m3 stage 2.5
Well 1st i never saw the car other than pics. Scary I got a lawyer to be the middle man I had the car shipped to HPF at my expense to be inspected. Im very happy with that decision. I received the car last week. Wow this thing is fast. Ive driven LMP V8 Prototypes and this is as powerful.
__________________
"Horsepower is how fast you hit the wall. Torque is how far you go through it."
Last edited by being3; 05-23-2012 at 07:33 PM. |
|
|
|
|
|
#2 |
|
Registered User
|
Dyno numbers to the wheel
On pump 604hp 445tq On pump and meth 643hp 509tq
__________________
"Horsepower is how fast you hit the wall. Torque is how far you go through it."
Last edited by being3; 05-25-2012 at 09:10 PM. |
|
|
|
|
|
#3 |
|
Registered User
|
Welcome and congrats on the purchase
|
|
|
|
|
|
#4 |
|
Registered User
|
Welcome...My wife lives in vancouver and I just received my Stage 3 a month ago. I plan on taking it to vancouver soon. We should connect.
__________________
![]() |
|
|
|
|
|
#5 |
|
Registered User
|
Sure lets meet up for sure. Pm me and I'll send my info. Lots of beans ah
__________________
"Horsepower is how fast you hit the wall. Torque is how far you go through it."
|
|
|
|
|
|
#6 |
|
Registered User
|
Anyone looking at buying a used HPF i can share some of the things i learned.
5000 spent at HPF getting sorted as it had about 20k since the engine and kit were done about 2.5 years ago. Seems the car needed some attention in making sure it was reliable. Needed a new clutch too. I wasn't planning on that and should have negotiated that in the price but i had already paid for the car by the time it was driven. The side skirts were damaged and so was the front splitter . I just got some new side skirts and will have them painted and installed in the next few weeks. Still looking for a good splitter that can handle real down force. the one thats on it I'm scared will blow off as i don't see any real support. The car needs some down force upfront as it wants to lift while accelerating at higher speeds Ill post some pics soon.
__________________
"Horsepower is how fast you hit the wall. Torque is how far you go through it."
Last edited by being3; 05-25-2012 at 09:12 PM. |
|
|
|
|
|
#7 |
|
Registered User
|
I had the car leak down tested and verified the motor was in good shape.
The exhaust gaskets needed changing from the manifold back to and including the turbo nd waste gate New oil and plugs. Plugs that were in it were the wrong ones All new couplers and elbows etc.. New 4inch air intake replaced New turbo to intercooler piping as it was dented and failing New meth pump and relay Stage 2 clutch Added catch can HPF did a thorough job and dynoed the car as well as street tested it. KIRK also putup with me pestering him daily to get the car done. Lol
__________________
"Horsepower is how fast you hit the wall. Torque is how far you go through it."
|
|
|
|
|
|
#8 |
|
Registered User
|
Whn buying a used car ur going to run into some problems sooner or later. Well here r my sooner ones
Car has some idle issues that just started. It stalls after 10 min at idle so ive ordered idle control valve. Ive driven the car a few hundred miles. Front left headlight is out. Replaced xenon bulb but that's not it so I've ordered a ballast and igniter to fix the problem as i cant get the inspection done without it and that means no insurance and plates so the car is just waiting
__________________
"Horsepower is how fast you hit the wall. Torque is how far you go through it."
|
|
|
|
|
|
#9 |
|
Registered User
|
Thanks
__________________
"Horsepower is how fast you hit the wall. Torque is how far you go through it."
|
|
|
|
|
|
#10 |
|
Registered User
|
Congrats .. Lets see some pictures
![]()
__________________
![]() |
|
|
|
|
|
#11 |
|
Registered User
|
Congrats!
__________________
![]() |
|
|
|
|
|
#12 |
|
Registered User
|
Congrats! Share some pictures when you get a chance!
__________________
05 BMW ///M3 SMG - Jet Black/Gray
HPF Stg2 Turbo 640rwhp, Eisenmann Race 83mmx4, Volk TE37 TA, Toyo T1R, Brembo BBK 380mm 6pots & 345, 6k HID, 6K HID Fogs, Depo Smoked Corners, Strassentech Front Lip, V-CSL Bootlid, V-CSL Diffuser ![]() |
|
|
|
|
|
#13 |
|
Senior Eurowerkz Member
|
good luck with your new baby
hope you have a good radar dector lollllllhope very thing works out with you
with your new ride.... don't forget to follow the maintance of the turbo..... bob
__________________
![]() |
|
|
|
|
|
#14 |
|
Registered User
Join Date: Jan 2007
Location: Ft.Hood,TX -- Afghanistan
Posts: 851
My Ride: 01HPF Stg2 M3, 11'X5
|
Congrats op! Sounds like a hell of alot you were stuck with After the purchase but HPF made sure you got a strong performing stage 2.5 huh! In for pics ASAP welcome to the HPF family!
__________________
Leonel Aka " Rico"
BMWCCA # 403748 01 BMW E46 M3 / 6 SPD / Tiag / Imola HPF Stg.2 on the new Pt6766 Turbo/ Open Dump/ AA Lightweight flywheel/ Aggressive Tune good for 661 RWHP! ![]() 2012 X5D 3.5i - Family hauler 2000 323ci - work in progress - wife's D/D FOR SALE: http://www.m3post.com/forums/showthread.php?t=727953 |
|
|
|
|
|
#15 |
|
"Have some candy!!"
Join Date: Sep 2002
Location: City of Angels
Posts: 6,227
My Ride: 2003 Technik S1 M3
|
i am imagining a silver car with radical gauges, congrats on the beast!
__________________
![]() Bimmerfest 2013 Photos here!!! "10 years, it's the end of the line. A stereo beat, done read about it last. Been livin' in a castle made out of sand, although we've never seen the civil line and clouds goes to land, the sun stops shining.. Day.. slowly turns to night, perspective, colors fade,.. start the soundtrack:.. Fade to Black." |
|
|
|
|
|
#16 |
|
Registered User
|
Copy of the dyno numbers. the top two are the ones I'm running. The bottom two were tests done with more boost but it did not make any more power. So the car is running 17 psi on pump an 23 in pump and meth. I did not have HPF run race gas numbers as its plenty fast as it is
__________________
"Horsepower is how fast you hit the wall. Torque is how far you go through it."
Last edited by being3; 05-22-2012 at 09:39 AM. |
|
|
|
|
|
#17 |
|
Registered User
|
__________________
"Horsepower is how fast you hit the wall. Torque is how far you go through it."
|
|
|
|
|
|
#18 |
|
Registered User
|
New gauge face with kilometers per hour. If anyone is looking for a silver MPH gauge face I have one
__________________
"Horsepower is how fast you hit the wall. Torque is how far you go through it."
|
|
|
|
|
|
#19 |
|
Registered User
|
Is this Funkyboy's Vert? I personally couldn't sleep at night if I had sold you my car with that many issues...glad you got it all sorted though and hopefully you get this idle bug figured out. SMG or 6speed?
__________________
|
|
|
|
|
|
#20 |
|
Registered User
|
Yes it was his vert. To his credit He was very good in making up for some of the issues HPF discovered but as for the damaged side skirts , rear bumper hanging down, and splitter as well as clutch and other misc things found out after the sale. I have not heard back from him.
__________________
"Horsepower is how fast you hit the wall. Torque is how far you go through it."
|
|
|
|
![]() |
| Tags |
| e46 m3, hpf, stage 2.5, turbo |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|