OIL TEMPS GETTING HOT - HPF Oil Cooler Group Buy!! - Page 2

HPF Chris · 06-27-2012, 11:39 AM

Quote:

Originally Posted by Dreikraft

How do I wire the ac fan?
I'll take the f clutch for 115

Quote:

Originally Posted by HighBoostin330

How do I jump on this deal?

Quote:

Originally Posted by jayc

mE TOO!

Kirk is out today. Just give us a quick call at 503-256-5600 and we'll ship the fan clutches out to you guys. They're a quick install.

Commanderwiggin · 06-27-2012, 12:28 PM

Quick install...with the right tool

otherwise enjoy bloody knuckles

HPF Chris · 06-28-2012, 07:05 PM

Quote:

Originally Posted by Commanderwiggin

Quick install...with the right tool

otherwise enjoy bloody knuckles

Of course.

Bdave · 06-28-2012, 10:19 PM

I bought one of these for my build. it is an impressive unit..massive! ..and well built.

Chris, Does anyone make after market braided oil lines for our cars. I have had low mileage hoses spring some pretty bad leaks. I expect this trend to continue. I would rather invest in something much superior so I dont spray oil all over my engine bay every time one fails.

I have never seen any for sale. They must be available?

I am not sure if I can even have some custom made. Are the fitting PROPRIETARY or are they readily available for a build? Aeroquip maybe.

I have all aftermarket brake and oil lines on my Honda Blackbird XX and they look and work great. Now I want something similar for the M3.
.

How many of you have had leakers? Is it hit and miss? I have been told its quite common and a problem for many BMW owners.
I dont like the OEM hose construction. It is a very weak design.

Not trying to jack the thread. It falls under connecting this engineering marvel (the HPF oil cooler) using sub standard OEM lines. I/we need much better connectors/oil and fluid lines.

fidofm · 06-29-2012, 06:57 AM

what about the Z4 m owners?

m3yal8r · 06-29-2012, 08:50 AM

Will these work/fit with an ESS supercharger set-up?

PatmanSC · 06-29-2012, 02:06 PM

Put my order in for a cooler and fan clutch

HPF Kirk · 06-29-2012, 02:29 PM

We have sold 3 so far... Get them while they last! Chris won't be this generous forever

HPF Kirk · 06-29-2012, 03:01 PM

And another, that is 4 gone!

HPF Kirk · 06-29-2012, 03:08 PM

Quote:

Originally Posted by fidofm

what about the Z4 m owners?

Unfortunately it is different.. After we get some more HPF Z4M's pumped out of the shop we will see what we can do.

Quote:

Originally Posted by m3yal8r

Will these work/fit with an ESS supercharger set-up?

The few we have tried have the intercooler piping preventing the oil coolers larger core from being installed. Email me some pics if you can and I will see if you are in the same boat.

Kirk@horsepowerfreaks.com

eddyys · 06-29-2012, 03:28 PM

Quote:

Originally Posted by HPF Kirk

And another, that is 4 gone!

Can't wait for it to get here! Just hit a 104 today here in DC and with Autox coming up the last thing I want is my engine calling it quits.

Do you know of any braided oil lines as well? Rather do it once and right.

Thanks again!

gixxer · 06-30-2012, 12:19 AM

I think this will fit, but just to confirm, any known issue in fitment with AA gen 3/level 2 setup? This is their older setup that uses the Rotrex blower.

Anything i should ask my installer to be sure the fitment will go smoothly?

Thanks!

M369 · 06-30-2012, 01:17 AM

It's ok for me with shipping to France 63430
For thé supercharger version send me price with shipping In PM

HPF Chris · 06-30-2012, 06:59 PM

Quote:

Originally Posted by eddyys

Can't wait for it to get here! Just hit a 104 today here in DC and with Autox coming up the last thing I want is my engine calling it quits.

Do you know of any braided oil lines as well? Rather do it once and right.

Thanks again!

Damn that's HOT

If ANYONE is doing Road Racing or AutoX, this is a must buy. The factory lines work just fine. You won't need braided ones.

Quote:

Originally Posted by gixxer

I think this will fit, but just to confirm, any known issue in fitment with AA gen 3/level 2 setup? This is their older setup that uses the Rotrex blower.

Anything i should ask my installer to be sure the fitment will go smoothly?

Thanks!

The only fitment issues was with the VF Stage 2 supercharger kit that had the air/water intercooler located in that space. I don't believe any of the AA kits have air/water intercoolers. The install is very straight forward and the kit comes with instructions.

Quote:

Originally Posted by M369

It's ok for me with shipping to France 63430
For thé supercharger version send me price with shipping In PM

We ship these all over the world. I'll have Kirk email you with a quote on Monday. Please PM me your email address and we will get the quote in our system.

Thanks.
Chris.

PatmanSC · 06-30-2012, 07:48 PM

I can't wait for my oil cooler and fan clutch. I'll finally be able to use my AC without the needle venturing to the red zone.

Also excited for something else

Mafia3 · 07-01-2012, 01:54 PM

I will take two of the fan clutches for $115 each, where do I send payment?
thanks!

HPF Chris · 07-01-2012, 03:32 PM

Quote:

Originally Posted by PatmanSC

I can't wait for my oil cooler and fan clutch. I'll finally be able to use my AC without the needle venturing to the red zone.

Also excited for something else

Using AC all summer on those hot days without worrying about engine and oil temps is a wonderful thing.

Now what else are you excited about???

Chris.

M369 · 07-01-2012, 03:33 PM

Chris you have à pm

HPF Chris · 07-01-2012, 03:34 PM

Quote:

Originally Posted by Mafia3

I will take two of the fan clutches for $115 each, where do I send payment?
thanks!

We take credit cards, paypal, wire, etc. For the group buy pricing, You can either PM me your email address and phone number or email us at sales@horsepowerfreaks.com.

To contact our sales reps directly, you can also email or call them at the numbers below.

Kirk - kirk@horsepowerfreaks.com - 503-256-5600 X114
Erik - erik@horsepowerfreaks.com - 503-256-5600 X111
Russ - russ@horsepowerfreaks.com - 503-256-5600 X107

Chris.

HPF Chris · 07-01-2012, 03:59 PM

Quote:

Originally Posted by M369

Chris you have à pm

You are all good to go.

Chris.

06-27-2012, 12:28 PM	#22
Commanderwiggin Registered User Join Date: Jun 2010 Location: Calgary, Canada Posts: 3,474 My Ride: 800rwhp Turbo M3 View My Garage	Quick install...with the right tool otherwise enjoy bloody knuckles __________________

06-28-2012, 10:19 PM	#24
Bdave Registered User Join Date: Feb 2008 Location: Fort Lauderdale Posts: 1,827 My Ride: M3 HPF Stage 3 View My Garage	I bought one of these for my build. it is an impressive unit..massive! ..and well built. Chris, Does anyone make after market braided oil lines for our cars. I have had low mileage hoses spring some pretty bad leaks. I expect this trend to continue. I would rather invest in something much superior so I dont spray oil all over my engine bay every time one fails. I have never seen any for sale. They must be available? I am not sure if I can even have some custom made. Are the fitting PROPRIETARY or are they readily available for a build? Aeroquip maybe. I have all aftermarket brake and oil lines on my Honda Blackbird XX and they look and work great. Now I want something similar for the M3. . How many of you have had leakers? Is it hit and miss? I have been told its quite common and a problem for many BMW owners. I dont like the OEM hose construction. It is a very weak design. Not trying to jack the thread. It falls under connecting this engineering marvel (the HPF oil cooler) using sub standard OEM lines. I/we need much better connectors/oil and fluid lines. __________________ Last edited by Bdave; 06-28-2012 at 10:21 PM.

06-29-2012, 06:57 AM	#25
fidofm Registered User Join Date: Jul 2008 Location: Saihat Posts: 6 My Ride: Z4 M Coupe View My Garage	what about the Z4 m owners? __________________ DSC_8192 by car-zoo, on Flickr '07 Z4MC l White Alpine l Supersprint Race Exhaust l Supersprint X Pipe l OEM Carbon fiber Spoiler l H&R Springs l Vossen VF051 l G-Power SK-I 415rwhp 345 TQ .

06-29-2012, 08:50 AM	#26
m3yal8r Registered User Join Date: Nov 2006 Location: Grasonville, MD Posts: 101 My Ride: 2002 e46 M3 View My Garage	Will these work/fit with an ESS supercharger set-up? __________________ 2002 BMW M3 [/B]Titanium Silver Metallic / Black / 6 Speed Mods: Performance: ESS VT1 455 Supercharger, Stepped Headers / Borla Header Back / Walbro 255 Suspension: Ground Control Street / School Coil-over 440/545 / AKG Motorsport Bushings all around Wheels: ZCP Comps 18X9.5 18X8.5 Magic Powers: Radar-Mirror PLX Gauge set-up/ V1 radar detector / Laser Interceptor

06-29-2012, 02:06 PM	#27
PatmanSC Registered User Join Date: Sep 2006 Location: Covina Posts: 358 My Ride: 06 AW/IR M3 View My Garage	Put my order in for a cooler and fan clutch __________________ 06 Alpine White/Imola Red M3 coupe, {Stage 2.5 P6766 open wastegate} \| M2-Motoring \| HRE Wheels \| Horsepower Freaks \| Tecnocraft \| Oink Fabrications \| Toyo Tires \| Mother's \| 00 Phoenix Yellow/Red Recaro Integra Type R #00-0035 {JDM Conversion, Built B18C5, Ferea internals, Toda build soon}

06-29-2012, 02:29 PM	#28
HPF Kirk Sponsor Join Date: Aug 2011 Posts: 115 View My Garage	We have sold 3 so far... Get them while they last! Chris won't be this generous forever __________________

06-29-2012, 03:01 PM	#29
HPF Kirk Sponsor Join Date: Aug 2011 Posts: 115 View My Garage	And another, that is 4 gone! __________________

06-30-2012, 12:19 AM	#32
gixxer Registered User Join Date: Jan 2006 Location: US Posts: 82 My Ride: 03 VFE DINAN5/04 M3 View My Garage	I think this will fit, but just to confirm, any known issue in fitment with AA gen 3/level 2 setup? This is their older setup that uses the Rotrex blower. Anything i should ask my installer to be sure the fitment will go smoothly? Thanks! __________________ need2buy: LTW flywheel + clutch ; wish: HPF ; Mod Journal

06-30-2012, 01:17 AM	#33
M369 Registered User Join Date: Mar 2011 Location: CLERMONT FERRAND Posts: 67 My Ride: M3 E46 SUPERCHARGED View My Garage	It's ok for me with shipping to France 63430 For thé supercharger version send me price with shipping In PM __________________

06-30-2012, 07:48 PM	#35
PatmanSC Registered User Join Date: Sep 2006 Location: Covina Posts: 358 My Ride: 06 AW/IR M3 View My Garage	I can't wait for my oil cooler and fan clutch. I'll finally be able to use my AC without the needle venturing to the red zone. Also excited for something else __________________ 06 Alpine White/Imola Red M3 coupe, {Stage 2.5 P6766 open wastegate} \| M2-Motoring \| HRE Wheels \| Horsepower Freaks \| Tecnocraft \| Oink Fabrications \| Toyo Tires \| Mother's \| 00 Phoenix Yellow/Red Recaro Integra Type R #00-0035 {JDM Conversion, Built B18C5, Ferea internals, Toda build soon}

07-01-2012, 01:54 PM	#36
Mafia3 Registered User Join Date: Nov 2002 Location: Atlanta Posts: 157 My Ride: M3 View My Garage	I will take two of the fan clutches for $115 each, where do I send payment? thanks! __________________ SPONSORED BY: Eurospeed\| Sig Pic by Kyle K.

07-01-2012, 03:33 PM	#38
M369 Registered User Join Date: Mar 2011 Location: CLERMONT FERRAND Posts: 67 My Ride: M3 E46 SUPERCHARGED View My Garage	Chris you have à pm __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: