E46 BMW Social Directory E46 FAQ 3-Series Discussion Forums BMW Photo Gallery BMW 3-Series Technical Information E46 Fanatics - The Ultimate BMW Resource BMW Vendors General E46 Forum The Tire Rack's Tire Wheel Forum Forced Induction Forum The Off-Topic The E46 BMW Showroom For Sale, For Trade or Wanting to Buy

Welcome to the E46Fanatics forums. E46Fanatics is the premiere website for BMW 3 series owners around the world with interactive forums, a geographical enthusiast directory, photo galleries, and technical information for BMW enthusiasts.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   E46Fanatics > Tuning & Tech > Forced Induction Forum Sponsored by Active Autowerke

Forced Induction Forum Sponsored by Active Autowerke
Discuss supercharging, turbocharging and even nitrous and water injection here.
Sponsored by Active Autowerke

Reply
 
Thread Tools Search this Thread Rating: Thread Rating: 2 votes, 5.00 average. Display Modes
Old 07-03-2012, 06:29 PM   #121
HPF Chris
Past Site Sponsor
 
Join Date: Feb 2006
Location: Portland, OR
Posts: 3,684
My Ride: 2002 M3, 2006 530i
Quote:
Originally Posted by illestminimike View Post
Being patient.
John is out test driving it right now. Once he gets back I'm going to take it for a spin and make a video.

Chris.
HPF Chris is offline   Reply With Quote
Old 07-03-2012, 07:37 PM   #122
HPF Chris
Past Site Sponsor
 
Join Date: Feb 2006
Location: Portland, OR
Posts: 3,684
My Ride: 2002 M3, 2006 530i
I just took the Z4M for a spin. It drove fantastic. Sorry about the sound quality. I left the closed cover on the Go Pro so it's hard to hear any of my commentary or the sound of the car. The car is extremely quiet. With a factory exhaust there will be no way to know this car is not stock (except for the MASSIVE POWERBAND!). We will be dyoing Alex's Z4M later this week so stay tuned!!

Chris.

HPF Chris is offline   Reply With Quote
Old 07-04-2012, 03:00 AM   #123
basar13
Registered User
 
Join Date: Dec 2006
Location: Turkey
Posts: 480
My Ride: Z4M, R8, 525xd, STI
Quote:
Originally Posted by HPF Chris View Post
I just took the Z4M for a spin. It drove fantastic. Sorry about the sound quality. I left the closed cover on the Go Pro so it's hard to hear any of my commentary or the sound of the car. The car is extremely quiet. With a factory exhaust there will be no way to know this car is not stock (except for the MASSIVE POWERBAND!). We will be dyoing Alex's Z4M later this week so stay tuned!!

Chris.


Looks like I will have too much fun this weekend

Chris is there any chance for you to make a E98 tune for high boost ? It would be a great option for all Z4M HPF owners
__________________
basar13 is offline   Reply With Quote
Old 07-04-2012, 02:33 PM   #124
HPF Chris
Past Site Sponsor
 
Join Date: Feb 2006
Location: Portland, OR
Posts: 3,684
My Ride: 2002 M3, 2006 530i
Quote:
Originally Posted by basar13 View Post
Looks like I will have too much fun this weekend

Chris is there any chance for you to make a E98 tune for high boost ? It would be a great option for all Z4M HPF owners
Not yet. We're going to get this dialed for a standard tune first.

Chris.
HPF Chris is offline   Reply With Quote
Old 07-11-2012, 10:34 AM   #125
basar13
Registered User
 
Join Date: Dec 2006
Location: Turkey
Posts: 480
My Ride: Z4M, R8, 525xd, STI
Quote:
Originally Posted by HPF Chris View Post
Not yet. We're going to get this dialed for a standard tune first.

Chris.
Any updates ?
__________________
basar13 is offline   Reply With Quote
Old 07-11-2012, 05:16 PM   #126
HPF Chris
Past Site Sponsor
 
Join Date: Feb 2006
Location: Portland, OR
Posts: 3,684
My Ride: 2002 M3, 2006 530i
Quote:
Originally Posted by basar13 View Post
Any updates ?
Sorry. I just spoke with my service manager and the car is on the dyno as I type this. We will have results soon.

Thanks.
Chris.
HPF Chris is offline   Reply With Quote
Old 07-12-2012, 04:42 AM   #127
basar13
Registered User
 
Join Date: Dec 2006
Location: Turkey
Posts: 480
My Ride: Z4M, R8, 525xd, STI
Quote:
Originally Posted by HPF Chris View Post
Sorry. I just spoke with my service manager and the car is on the dyno as I type this. We will have results soon.

Thanks.
Chris.
Thanks i am waiting your email then i will flash my ecu ASAP
__________________
basar13 is offline   Reply With Quote
Old 07-12-2012, 12:18 PM   #128
HPF Chris
Past Site Sponsor
 
Join Date: Feb 2006
Location: Portland, OR
Posts: 3,684
My Ride: 2002 M3, 2006 530i
Quote:
Originally Posted by basar13 View Post
Thanks i am waiting your email then i will flash my ecu ASAP
John was on the dyno with the Z4M last night. The car threw some codes and the car wouldn't let him do full pulls. He's got the car back on the lift and we hope to figure it out today and get it back on the dyno.

Chris.
HPF Chris is offline   Reply With Quote
Old 07-12-2012, 03:56 PM   #129
basar13
Registered User
 
Join Date: Dec 2006
Location: Turkey
Posts: 480
My Ride: Z4M, R8, 525xd, STI
Quote:
Originally Posted by HPF Chris View Post
John was on the dyno with the Z4M last night. The car threw some codes and the car wouldn't let him do full pulls. He's got the car back on the lift and we hope to figure it out today and get it back on the dyno.

Chris.
Thank you for the update Chris.
__________________
basar13 is offline   Reply With Quote
Old 07-13-2012, 04:41 PM   #130
HPF Chris
Past Site Sponsor
 
Join Date: Feb 2006
Location: Portland, OR
Posts: 3,684
My Ride: 2002 M3, 2006 530i
Quote:
Originally Posted by basar13 View Post
Thank you for the update Chris.
No problem. John made more progress today. He found out that one of the O2 sensors was not heating up. Certain codes cause the ProEFI to not control the engine correctly and factory O2 sensor codes are a biggie. John is installing another factory O2 sensor today and it will be back on the dyno.

Chris.
HPF Chris is offline   Reply With Quote
Old 07-13-2012, 04:56 PM   #131
basar13
Registered User
 
Join Date: Dec 2006
Location: Turkey
Posts: 480
My Ride: Z4M, R8, 525xd, STI
Quote:
Originally Posted by HPF Chris View Post
No problem. John made more progress today. He found out that one of the O2 sensors was not heating up. Certain codes cause the ProEFI to not control the engine correctly and factory O2 sensor codes are a biggie. John is installing another factory O2 sensor today and it will be back on the dyno.

Chris.
Thanks Chris great update,

i will have my injectors and ecu installed tomorrow, so if you finish the dyno today it would be GREAT if you can send me the tune today.
__________________
basar13 is offline   Reply With Quote
Old 07-13-2012, 06:06 PM   #132
DOC_Race
Registered User
 
Join Date: Jun 2012
Location: Portland, OR
Posts: 106
My Ride: 03 M3
it's back to life! I'm excited for this car, looks like such a blast to drive (this chassis)
DOC_Race is offline   Reply With Quote
Old 07-16-2012, 08:34 PM   #133
basar13
Registered User
 
Join Date: Dec 2006
Location: Turkey
Posts: 480
My Ride: Z4M, R8, 525xd, STI
This is what the dial looks like with pro efi

__________________
basar13 is offline   Reply With Quote
Old 07-16-2012, 08:38 PM   #134
basar13
Registered User
 
Join Date: Dec 2006
Location: Turkey
Posts: 480
My Ride: Z4M, R8, 525xd, STI
I hope HPF will solve this this month or i will make a new harness and a new ecu.....
__________________
basar13 is offline   Reply With Quote
Old 07-17-2012, 06:54 AM   #135
basar13
Registered User
 
Join Date: Dec 2006
Location: Turkey
Posts: 480
My Ride: Z4M, R8, 525xd, STI
on oem ecu I currently have

1- crankshaft position sensor electric
2- exhaust vanos 1 control
3- exhaust vanos variable cam control test
4- exhaust vanos control 2
5- ignition voltage supply
6- brake booster, electric ATIC39



On Pro-efi

1- "camEdges fault" ,
2- "increasingFaultCounts" and
3- cam/crank sync faults number is increasing continously.


Any comments?
__________________
basar13 is offline   Reply With Quote
Old 07-18-2012, 12:10 PM   #136
HPF Chris
Past Site Sponsor
 
Join Date: Feb 2006
Location: Portland, OR
Posts: 3,684
My Ride: 2002 M3, 2006 530i
John removed the last o2 code, was driving the Z4M and making dyno pulls however the car would cut the throttle on each pull. He found a possible glitch in the harness or wiring. It appears the DSC is not receiving the proper signal so John and Jason are going to work on the pin-out today to determine how to quickly resolve the issue.

Chris.
HPF Chris is offline   Reply With Quote
Old 07-18-2012, 03:59 PM   #137
basar13
Registered User
 
Join Date: Dec 2006
Location: Turkey
Posts: 480
My Ride: Z4M, R8, 525xd, STI
Quote:
Originally Posted by HPF Chris View Post
John removed the last o2 code, was driving the Z4M and making dyno pulls however the car would cut the throttle on each pull. He found a possible glitch in the harness or wiring. It appears the DSC is not receiving the proper signal so John and Jason are going to work on the pin-out today to determine how to quickly resolve the issue.

Chris.
Thank you for these updates it helps alot. If John and Jason is working together it means this could be solved very soon.
__________________
basar13 is offline   Reply With Quote
Old 07-18-2012, 05:44 PM   #138
sniperm
Registered User
 
Join Date: Feb 2005
Location: GA
Posts: 463
My Ride: maxima
Cant wait!!
__________________


04' LSB
sniperm is offline   Reply With Quote
Old 07-19-2012, 02:17 PM   #139
HPF Chris
Past Site Sponsor
 
Join Date: Feb 2006
Location: Portland, OR
Posts: 3,684
My Ride: 2002 M3, 2006 530i
Quote:
Originally Posted by basar13 View Post
Thank you for these updates it helps alot. If John and Jason is working together it means this could be solved very soon.
John traced all the wires and they trace through correctly. We are now checking ot see if it's in the CAN bus. ProEFI is providing lots of help. It's the first Z4M they've done so there will be a learning curve.

Chris.
HPF Chris is offline   Reply With Quote
Old 07-19-2012, 02:41 PM   #140
Cipri
Registered User
 
Join Date: Apr 2008
Location: Romania
Posts: 208
My Ride: E46 M3 2002
You should have choosen AEM
Cipri is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Censor is ON





All times are GMT -5. The time now is 05:23 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use