Pic request: SLAMMED e46's - Page 65

dano17 · 10-03-2012, 11:18 PM

Quote:

Originally Posted by Basketcase

Airrex air struts all around and Accuair E-Level management. Airrex is the first kit that's full bolt in application

How much did that run ya? I dont really want to go BOC on rokkors...

Basketcase · 10-03-2012, 11:43 PM

Quote:

Originally Posted by dano17

How much did that run ya? I dont really want to go BOC on rokkors...

I don't really remember, all together almost $5gs. But I got top of the line everything. I am running 2 Air Zenith compressors instead of Viairs. So right there is twice the price for compressors. I'll post some pics of my trunk set up tomorrow. Since it is low related

dano17 · 10-04-2012, 12:03 AM

Damn, yea in for pics. Here's my last car, really makes me miss air...

nckash055 · 10-04-2012, 09:19 AM

So you guys seem uk your fit ment i could use your help i am about to get a set of oz mitios 2 piece 18x8.5 aquare setup with 3inch lips et 46 ok and then there that dude with the blue oz mitos and they are staggered if i do thoes offsets would i set like that even tho im 8.5 all around. Here r the specs for the other car

Evap · 10-04-2012, 09:27 AM

Quote:

Originally Posted by nckash055

So you guys seem uk your fit ment i could use your help i am about to get a set of oz mitios 2 piece 18x8.5 aquare setup with 3inch lips et 46 ok and then there that dude with the blue oz mitos and they are staggered if i do thoes offsets would i set like that even tho im 8.5 all around. Here r the specs for the other car

You would sit NOWHERE near like that. You'd be about 3/4" more inside the fender up front, and probably 1-1/4" in the back. I'm way too lazy to do that math right now, but no, your fitment would be nothing like that.

BimmerApp wut

nckash055 · 10-04-2012, 10:09 AM

Id obviously use spacers to match his offsets

treetirtyeye · 10-04-2012, 09:58 PM

new to the forums here's my current setup, awaiting spacers for the rear

23dilbert · 10-04-2012, 10:01 PM

Quote:

Originally Posted by treetirtyeye

new to the forums here's my current setup, awaiting spacers for the rear

What size wheels and tires do you have?

Alanz0 · 10-04-2012, 10:34 PM

^+1 are those XXR's? What size?

So Lowww · 10-04-2012, 10:43 PM

Oh damn Basketcase I didn't know that was you dude. We coulda met up man haha.
All weekend my buddies kept going hey there's an M3 that's lower than you, and I'd be like yeah cause it's bagged. Looked good dude.

zabalzae · 10-04-2012, 10:50 PM

Quote:

Originally Posted by smg330

HIN right?

Sent from my SAMSUNG-SGH-I747 using Bimmer App

BreakMyWallet · 10-04-2012, 10:56 PM

everyones on air.

Basketcase · 10-05-2012, 12:14 AM

Quote:

Originally Posted by So Lowww

Oh damn Basketcase I didn't know that was you dude. We coulda met up man haha.
All weekend my buddies kept going hey there's an M3 that's lower than you, and I'd be like yeah cause it's bagged. Looked good dude.

i was lower than you static anyways.. haha jokes

i didnt know you bought an M until i got home from H20i.. saw your car down there and it was sick! thought you were still driving that ol girl.

you will see the car soon on stanceworks as Mike shot it for an upcoming feature. too bad the car isnt done yet for the pics

treetirtyeye · 10-05-2012, 02:12 PM

Quote:

Originally Posted by Alanz0

^+1 are those XXR's? What size?

bbs style 19's 17x8 all around on falken 205/40

Basketcase · 10-05-2012, 04:54 PM

Dano here is my trunk

I know it's dirty.. You get the point

The lines coming out of the manifold were polished copper lines to match the scheme but I had a leak and no time so I ripped them out to make it to H2Oi in time with no problems.. The nylon lines will be replaced shortly

zabalzae · 10-05-2012, 10:29 PM

Want to go lower but the roads here in austin r really bad.

Sent from my SAMSUNG-SGH-I747 using Bimmer App

dano17 · 10-07-2012, 06:01 PM

Quote:

Originally Posted by Basketcase

Dano here is my trunk

I know it's dirty.. You get the point

The lines coming out of the manifold were polished copper lines to match the scheme but I had a leak and no time so I ripped them out to make it to H2Oi in time with no problems.. The nylon lines will be replaced shortly

I like that, I plan on trying to hide everything under the carpet..

L0standards · 10-07-2012, 06:09 PM

Does this count?

rcsummers · 10-07-2012, 10:27 PM

ive been spending too much time in here. I want Air.

Dibaltic · 10-08-2012, 07:53 AM

Quote:

Originally Posted by rcsummers

ive been spending too much time in here. I want Air.

Same here

10-04-2012, 09:58 PM	#1287
treetirtyeye Registered User Join Date: Mar 2012 Location: Dallas, Texas Posts: 2 My Ride: 03 330i View My Garage	new to the forums here's my current setup, awaiting spacers for the rear Attached Thumbnails

10-04-2012, 10:43 PM	#1290
So Lowww Registered User Join Date: Jun 2009 Location: Philly Posts: 4,916 My Ride: E28 View My Garage	Oh damn Basketcase I didn't know that was you dude. We coulda met up man haha. All weekend my buddies kept going hey there's an M3 that's lower than you, and I'd be like yeah cause it's bagged. Looked good dude. __________________ Last edited by So Lowww; 10-04-2012 at 10:43 PM.

10-04-2012, 10:56 PM	#1292
BreakMyWallet Registered User Join Date: Oct 2005 Location: So Cal Posts: 9,103 My Ride: B6 A4 View My Garage	everyones on air. __________________ Cleaning out my closet! JEREMY

10-05-2012, 04:54 PM	#1295
Basketcase Registered User Join Date: Oct 2010 Location: Toronto, Ontario Posts: 56 My Ride: 2005 AW/IR M3 View My Garage	Dano here is my trunk I know it's dirty.. You get the point The lines coming out of the manifold were polished copper lines to match the scheme but I had a leak and no time so I ripped them out to make it to H2Oi in time with no problems.. The nylon lines will be replaced shortly Attached Thumbnails

10-05-2012, 10:29 PM	#1296
zabalzae Registered User Join Date: Jun 2012 Location: Georgetown Texas Posts: 154 My Ride: 01 330ci View My Garage	Want to go lower but the roads here in austin r really bad. Sent from my SAMSUNG-SGH-I747 using Bimmer App Attached Thumbnails

10-04-2012, 12:03 AM	#1283
dano17 Registered User Join Date: Dec 2011 Location: Mohrsville Posts: 150 My Ride: 2000 328i View My Garage	Damn, yea in for pics. Here's my last car, really makes me miss air...

10-04-2012, 09:19 AM	#1284
nckash055 Registered User Join Date: Sep 2012 Location: mass Posts: 29 My Ride: 323i View My Garage	So you guys seem uk your fit ment i could use your help i am about to get a set of oz mitios 2 piece 18x8.5 aquare setup with 3inch lips et 46 ok and then there that dude with the blue oz mitos and they are staggered if i do thoes offsets would i set like that even tho im 8.5 all around. Here r the specs for the other car

10-04-2012, 10:09 AM	#1286
nckash055 Registered User Join Date: Sep 2012 Location: mass Posts: 29 My Ride: 323i View My Garage	Id obviously use spacers to match his offsets

10-04-2012, 10:34 PM	#1289
Alanz0 Registered User Join Date: Sep 2010 Location: The Burg, PA Posts: 216 My Ride: 325i View My Garage	^+1 are those XXR's? What size?

10-07-2012, 06:09 PM	#1298
L0standards Registered User Join Date: Sep 2012 Location: Ny Posts: 203 My Ride: E46/325i-sold e46/m3 View My Garage	Does this count? __________________ Follow me on Instagram:e46_keith Pm me for fender rolling in the tristate

10-07-2012, 10:27 PM	#1299
rcsummers Mister TechnoMeister Join Date: Jan 2009 Location: Suburbs, NJ Posts: 3,014 My Ride: M3 View My Garage	ive been spending too much time in here. I want Air. __________________ "RICH" EURO.TECHNIKS My Build Thread

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread: