Wide body coming soon!!! - Page 2

pilot1ner · 10-02-2012, 02:37 AM

Just sent my MT Et drag radials to the shop that's doing the body work. Hope they mold my fenders nice around them!

Dreikraft · 10-02-2012, 10:21 AM

Nice. What size?

pilot1ner · 10-02-2012, 06:26 PM

Quote:

Originally Posted by dreikraft

nice. What size?

305/35/19

pilot1ner · 10-07-2012, 10:33 PM

Look at these bad boys!!! Now keep in mind they cut the fenders just to move my car and their molding the fenders around the wheels. So who now thinks going deep dish in front is wack? Speak now because after their done with the wide body the people that were talkin their s@#t im gonna make them gonna eat it! P.S. thats not me in the car!..haha

pilot1ner · 10-09-2012, 01:20 PM

cant wait to see how this is gonna come out!

323tom · 10-09-2012, 01:51 PM

Ya that's gonna look sick so what are they gonna do about the side skirts? Gonna tie it into the front/rear quarters? The dish doesn't look like 4" at the front but could be the pics on my Iphone, can't wait to see it too I might have my fronts done this winter if yours turns out proper!

pilot1ner · 10-09-2012, 02:36 PM

The fronts are a couple mm short of 4in. The pictures don't do it justice.Zoom on it and u can tell its pretty deep.

Dirty Mike · 10-09-2012, 03:09 PM

Wiiiiiiiiideeeee load man

PatmanSC · 10-09-2012, 03:22 PM

Sooooo sick man!!!!

Can't wait to see the widebody!!!

Ill be in your boat soon as I'm going widebody too!

pilot1ner · 10-09-2012, 06:00 PM

Quote:

Originally Posted by 323tom

Ya that's gonna look sick so what are they gonna do about the side skirts? Gonna tie it into the front/rear quarters? The dish doesn't look like 4" at the front but could be the pics on my Iphone, can't wait to see it too I might have my fronts done this winter if yours turns out proper!

They're going to blend the side skirts with the fenders but I wanted it to look as stock as possible.

323tom · 10-09-2012, 07:54 PM

Can't wait to see the outcome I might have mine redone this winter depending how yours and Patmans come out, I like mine I just wish they were tied into the side skirts (didn't want this at first because i wanted it to look stockish)

dallasberry · 10-09-2012, 08:36 PM

That's gonna be wiiiiiidddeeee

pilot1ner · 10-10-2012, 12:57 AM

Quote:

Originally Posted by 323tom

Ya that's gonna look sick so what are they gonna do about the side skirts? Gonna tie it into the front/rear quarters? The dish doesn't look like 4" at the front but could be the pics on my Iphone, can't wait to see it too I might have my fronts done this winter if yours turns out proper!

If my car cones out sick, and you do yours similar just remember who rocked it first!

323tom · 10-10-2012, 08:43 AM

Lol I'm already widened in the rear with 18x12 and 335 toyo r888...I'm talking about the front widening I'm gonna see how they do toura

Quote:

Originally Posted by pilot1ner

If my car cones out sick, and you do yours similar just remember who rocked it first!

pilot1ner · 10-10-2012, 06:40 PM

Quote:

Originally Posted by 323tom

Lol I'm already widened in the rear with 18x12 and 335 toyo r888...I'm talking about the front widening I'm gonna see how they do toura

From my understanding my shop said that widening the rear is more difficult to keep that stock look, because if u look at how the rear side skirts sorta tucks in.

pilot1ner · 10-12-2012, 05:04 AM

Mocking up the fenders.

lucky_doggg7 · 10-12-2012, 05:52 AM

When done right, wide body kits look cool. That PTG / GTR cars have always looked fab in my opinion. About wide body M's, there is a fellah at DAI in South OC who has not one, but two wide body M3s, and they're put together fairly well. Anyways, good luck and keep up the journal/progress photos.

str8dum1 · 10-12-2012, 08:52 AM

305 on a 12" wheel? so this is a hellaflush drift car.

are those metal flares or plastic? should look nice when its all completed!

dallasberry · 10-12-2012, 09:16 AM

That definitely has some potential!

armyB4 · 10-12-2012, 10:05 AM

I hope they dressed those cuts on the factory sheetmetal. Looks like a 2 year did the cutting.

Second, the choice of using universal fiberglass fender flares that are not even shaped to fit the body lines?

Widebody is never a cheap proposition, so why have it done cheaply?

10-07-2012, 10:33 PM	#24
pilot1ner Registered User Join Date: Oct 2006 Location: palm sings ca Posts: 187 My Ride: e46 View My Garage	Look at these bad boys!!! Now keep in mind they cut the fenders just to move my car and their molding the fenders around the wheels. So who now thinks going deep dish in front is wack? Speak now because after their done with the wide body the people that were talkin their s@#t im gonna make them gonna eat it! P.S. thats not me in the car!..haha Attached Thumbnails Last edited by pilot1ner; 10-09-2012 at 01:22 PM.

10-09-2012, 01:51 PM	#26
323tom Registered User Join Date: Mar 2008 Location: toronto Posts: 1,171 My Ride: Turbo 323 ;) View My Garage	Ya that's gonna look sick so what are they gonna do about the side skirts? Gonna tie it into the front/rear quarters? The dish doesn't look like 4" at the front but could be the pics on my Iphone, can't wait to see it too I might have my fronts done this winter if yours turns out proper! __________________

10-09-2012, 02:36 PM	#27
pilot1ner Registered User Join Date: Oct 2006 Location: palm sings ca Posts: 187 My Ride: e46 View My Garage	The fronts are a couple mm short of 4in. The pictures don't do it justice.Zoom on it and u can tell its pretty deep. Last edited by pilot1ner; 10-09-2012 at 02:38 PM.

10-09-2012, 03:22 PM	#29
PatmanSC Registered User Join Date: Sep 2006 Location: Covina Posts: 358 My Ride: 06 AW/IR M3 View My Garage	Sooooo sick man!!!! Can't wait to see the widebody!!! Ill be in your boat soon as I'm going widebody too! __________________ 06 Alpine White/Imola Red M3 coupe, {Stage 2.5 P6766 open wastegate} \| M2-Motoring \| HRE Wheels \| Horsepower Freaks \| Tecnocraft \| Oink Fabrications \| Toyo Tires \| Mother's \| 00 Phoenix Yellow/Red Recaro Integra Type R #00-0035 {JDM Conversion, Built B18C5, Ferea internals, Toda build soon}

10-09-2012, 07:54 PM	#31
323tom Registered User Join Date: Mar 2008 Location: toronto Posts: 1,171 My Ride: Turbo 323 ;) View My Garage	Can't wait to see the outcome I might have mine redone this winter depending how yours and Patmans come out, I like mine I just wish they were tied into the side skirts (didn't want this at first because i wanted it to look stockish) __________________

10-02-2012, 02:37 AM	#21
pilot1ner Registered User Join Date: Oct 2006 Location: palm sings ca Posts: 187 My Ride: e46 View My Garage	Just sent my MT Et drag radials to the shop that's doing the body work. Hope they mold my fenders nice around them!

10-02-2012, 10:21 AM	#22
Dreikraft Registered User Join Date: Jun 2008 Location: Alaska :( Posts: 670 My Ride: slow m3 View My Garage	Nice. What size?

10-09-2012, 01:20 PM	#25
pilot1ner Registered User Join Date: Oct 2006 Location: palm sings ca Posts: 187 My Ride: e46 View My Garage	cant wait to see how this is gonna come out!

10-09-2012, 03:09 PM	#28
Dirty Mike Registered User Join Date: Jan 2011 Location: Alabama Posts: 299 My Ride: Fern Green 330ci View My Garage	Wiiiiiiiiideeeee load man

10-09-2012, 08:36 PM	#32
dallasberry Registered User Join Date: Jul 2010 Location: Edmonton Posts: 1,088 My Ride: ///M3 View My Garage	That's gonna be wiiiiiidddeeee __________________

10-12-2012, 05:04 AM	#36
pilot1ner Registered User Join Date: Oct 2006 Location: palm sings ca Posts: 187 My Ride: e46 View My Garage	Mocking up the fenders. Attached Thumbnails

10-12-2012, 05:52 AM	#37
lucky_doggg7 Registered User Join Date: Mar 2008 Location: OC Posts: 282 My Ride: 2005 M3 View My Garage	When done right, wide body kits look cool. That PTG / GTR cars have always looked fab in my opinion. About wide body M's, there is a fellah at DAI in South OC who has not one, but two wide body M3s, and they're put together fairly well. Anyways, good luck and keep up the journal/progress photos.

10-12-2012, 08:52 AM	#38
str8dum1 Registered User Join Date: Dec 2011 Location: raleigh Posts: 156 My Ride: VQ38DETT View My Garage	305 on a 12" wheel? so this is a hellaflush drift car. are those metal flares or plastic? should look nice when its all completed! __________________ VQ38DETT on twin 6262 with ProEFI128 Last edited by str8dum1; 10-12-2012 at 08:53 AM.

10-12-2012, 09:16 AM	#39
dallasberry Registered User Join Date: Jul 2010 Location: Edmonton Posts: 1,088 My Ride: ///M3 View My Garage	That definitely has some potential! __________________

10-12-2012, 10:05 AM	#40
armyB4 Registered User Join Date: Mar 2012 Location: USA Posts: 19 My Ride: Many cars View My Garage	I hope they dressed those cuts on the factory sheetmetal. Looks like a 2 year did the cutting. Second, the choice of using universal fiberglass fender flares that are not even shaped to fit the body lines? Widebody is never a cheap proposition, so why have it done cheaply?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: