tps sensor

any 1 any guides on how too replace a tps sensor on a 323 e46 2.5 litre thanks

Originally Posted by tamb

any 1 any guides on how too replace a tps sensor on a 323 e46 2.5 litre thanks

I think that is part of the throttle body. If you are getting that code try cleaning the TB thoroughly with the spray and a wire brush. Though I believe some models have a throttle sensor in the pedal also.

thanx have u any guides on how to remove throttle body

Originally Posted by tamb

thanx have u any guides on how to remove throttle body

Not that I know of ... Though, it's not that difficult. For me putting the intake boot back on is the hardest part. It's kind of a PIA. And if you have a round connector for the TB when you put it back you have to have the outer housing that turns turned all the way to the left. Attach the plug and turn it all the way to the right so the arrows are aligned. You will know what I am talking about when you see it.

It's included in this video:

http://blog.bavauto.com/8003/diy-vid...lation-system/

cheers guys like too try things my self and learn so hope its not too hard to fix

I believe there is another TPS by the accelerator pedal.

any clue where. great video its a throttle sensor that needs replaced a thought they were only one on the throttle boddy ?

I had codes for the throttle body but they went away after i "reset" it. Pedal to full throttle and hold. Key to pos 2 count to 5 then turn key off and release pedal.

Sent from my DROIDX using Bimmer App