Went to the dyno today

braves011 · 10-26-2012, 03:37 PM

so wanted to get some baseline numbers for my ZHP. pull was done in 4th on a dynojet was 89* degrees out, its Florida so humidity was prolly ridiculous. Car is bone stock turned out 202HP and 208TQ I was actually pretty impressed with the tq numbers since its said to only have 222ftlbs.

Mango · 10-26-2012, 03:39 PM

Cool stuff. Dyno jets tend to read higher than other types of machines. so don't be surprised.

braves011 · 10-26-2012, 03:42 PM

Quote:

Originally Posted by E46Mango

Cool stuff. Dyno jets tend to read higher than other types of machines. so don't be surprised.

true but they tend to be the most accurate with the proper CF.

///MPR77 · 10-26-2012, 04:16 PM

Quote:

Originally Posted by braves011

so wanted to get some baseline numbers for my ZHP. pull was done in 4th on a dynojet was 89* degrees out, its Florida so humidity was prolly ridiculous. Car is bone stock turned out 202HP and 208TQ I was actually pretty impressed with the tq numbers since its said to only have 222ftlbs.

So you finally found your car!!!

Congrats!

sammk · 10-26-2012, 10:46 PM

BMW is know to rate power and torque on the pessimistic side, and going by the dyno numbers, you are probably in the low 230s for torque.. Not bad by any means assuming it's accurate!

10-26-2012, 03:37 PM	#1
braves011 Registered User Join Date: Feb 2011 Location: Navarre, FL Posts: 29 My Ride: 330i ZHP Imola View My Garage	Went to the dyno today so wanted to get some baseline numbers for my ZHP. pull was done in 4th on a dynojet was 89* degrees out, its Florida so humidity was prolly ridiculous. Car is bone stock turned out 202HP and 208TQ I was actually pretty impressed with the tq numbers since its said to only have 222ftlbs.

10-26-2012, 03:39 PM	#2
Mango Platinum Plus Quality Join Date: Mar 2006 Location: Southern California Posts: 16,461 My Ride: M54B30 View My Garage	Cool stuff. Dyno jets tend to read higher than other types of machines. so don't be surprised. __________________ Cooling \| Maintenance \| Vacuum \| Suspension \| Costs "Be a yardstick of quality. Some people aren't used to an environment where excellence is expected." -Steve Jobs

10-26-2012, 10:46 PM	#5
sammk Registered User Join Date: Jan 2008 Location: Michigan Posts: 378 My Ride: Bone-stock E92 View My Garage	BMW is know to rate power and torque on the pessimistic side, and going by the dyno numbers, you are probably in the low 230s for torque.. Not bad by any means assuming it's accurate! __________________ E92 convert. BMW Fanatic.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: