HPF Stage 2.75 vs Supercharged C5 Z06 (Video)

Originally Posted by M3PTGSC

Gotcha!! I thought that it was ready and dialed in before it left ProEFI so i was surprised Cant wait till its 100% so we can see some good races

It was only dialed for the dyno run...everything else was just a pile of mashed potatoes... If it wasn't for the guys at FSR to help dial some of it in...wouldn't have been a very fun time for Marcus that's for sure.

Kenton killing it in the Imola Red 71mm M3!!!

Very nice Kenton, Congrats! Wish I could have been there with you guys, looked like a blast.

Originally Posted by lucky_doggg7

Marcus - you own a 1000 hp M3?????? I'm having trouble wrapping my mind around that kind of power. I would pay you just for a little ride in your sled!!!

Come to the next Shift-S3ctor event. Free rides for everyone!

Originally Posted by M3PTGSC

Gotcha!! I thought that it was ready and dialed in before it left ProEFI so i was surprised Cant wait till its 100% so we can see some good races

I was surprised as well.. Ian found all sorts of issues to improve on.

Originally Posted by Commanderwiggin

It was only dialed for the dyno run...everything else was just a pile of mashed potatoes... If it wasn't for the guys at FSR to help dial some of it in...wouldn't have been a very fun time for Marcus that's for sure.

Exactly.. the car was dialed in to make power and thats it. With the help of FSR we were able to properly apply that power by for the most part.. just removing it. Boost wasn't ramping.. it was flat lined at all speeds .. so 32lbs at 30mph and 32lbs at 150mph.. obviously there's no putting down 900rwhp at 30mph, so we pulled the boost out as much as possible at lower speeds and didn't really uncork it until 100mph.. but even then we still spun to 155mph.. so we pulled out more.. trying to target roughly what Kenton was targeting which was about 25lbs.

Originally Posted by MarcusLSB

Exactly.. the car was dialed in to make power and thats it. With the help of FSR we were able to properly apply that power by for the most part.. just removing it. Boost wasn't ramping.. it was flat lined at all speeds .. so 32lbs at 30mph and 32lbs at 150mph.. obviously there's no putting down 900rwhp at 30mph, so we pulled the boost out as much as possible at lower speeds and didn't really uncork it until 100mph.. but even then we still spun to 155mph.. so we pulled out more.. trying to target roughly what Kenton was targeting which was about 25lbs.

Go FRS!!! You can definitely see the changes in one of the videos.