BMW Logging Software - Page 9

smooth1 · 11-25-2012, 01:23 AM

I've always been curious about what that software can do. I know nothing about it.

Nickvjr · 11-25-2012, 02:40 AM

This sounds amazing. I have INPA running but to have a software that is easier to use & not in German would be great!

smooth1 · 11-25-2012, 07:57 AM

Quote:

Originally Posted by Nickvjr

This sounds amazing. I have INPA running but to have a software that is easier to use & not in German would be great!

Thanks. For the well developed platforms like yours it's pretty handy. If you only need it to check/clear codes and adaptations then it's free.

darksideracer69 · 11-27-2012, 07:43 AM

I'd probably purchase the full version if it wasn't locked to one DME. Just makes it less useful to me.

Sent from my PC36100 using Bimmer App

smooth1 · 11-27-2012, 08:41 AM

There's a link to some unlimited DME free software in my first post, if that's more what you're looking for. Very cool stuff.

smooth1 · 11-27-2012, 11:08 AM

Quote:

Originally Posted by TrippinBimmer

Is it available already?

I'm ready for Windows users to test out this functionality. Anyone who has an Innovative wideband let me know.

darksideracer69 · 11-27-2012, 12:01 PM

You talking about inpa? I already have all that good stuff program, gt1, inpa, winkfp, ncs expert.

Sent from my PC36100 using Bimmer App

smooth1 · 11-27-2012, 12:05 PM

Quote:

Originally Posted by darksideracer69

You talking about inpa? I already have all that good stuff program, gt1, inpa, winkfp, ncs expert.

Sent from my PC36100 using Bimmer App

No. See the link in my first post of the thread.

hassmaschine · 11-27-2012, 12:08 PM

Quote:

Originally Posted by smooth1

I'm ready for Windows users to test out this functionality. Anyone who has an Innovative wideband let me know.

hey, sorry I haven't been around much. no energy for this project currently, but I do have an Innovative LC-1. You thinking of using the LC-1's serial protocol or something?

smooth1 · 11-27-2012, 01:08 PM

Quote:

Originally Posted by hassmaschine

hey, sorry I haven't been around much. no energy for this project currently, but I do have an Innovative LC-1. You thinking of using the LC-1's serial protocol or something?

It's already in. I need testers.

BimmerBrakes · 11-27-2012, 01:16 PM

^ Check email

hassmaschine · 11-27-2012, 03:30 PM

Quote:

Originally Posted by smooth1

It's already in. I need testers.

you want me to run your software with the Innovative serial cable hooked up?

smooth1 · 11-28-2012, 09:45 AM

Tested and working. Just need to record the values.

hassmaschine · 12-01-2012, 12:39 PM

maybe I'm missing something, I couldn't find anywhere to connect to the LC-1? I hooked it up and it recognized the serial port but that's it. of course I should probably check that the 2.5mm stereo plug is still attached to the controller, lol.

will it work without a DME hooked up?

smooth1 · 12-01-2012, 01:44 PM

You don't have the version. It's in the software area.

No, it starts at the same time you start logging. You should use logworks to monitor just a/f alone.

hassmaschine · 12-01-2012, 02:47 PM

ah, yeah, I just wanted to "test" it. I can datalog with my ECU if I need to, but eventually I'll have the LC-1 paired with MSS54.

smooth1 · 12-01-2012, 04:23 PM

It's in the software area if you want to grab it.

11-25-2012, 02:40 AM	#162
Nickvjr Registered User Join Date: Nov 2011 Location: Prescott, AZ Posts: 181 My Ride: 2004 330Ci Conv. View My Garage	This sounds amazing. I have INPA running but to have a software that is easier to use & not in German would be great! __________________ -Nickvjr 2004 BMW 330Ci Convertible

12-01-2012, 01:44 PM	#175
smooth1 Registered User Join Date: Nov 2005 Location: Phoenix Posts: 255 My Ride: BMW FTW View My Garage	You don't have the version. It's in the software area. No, it starts at the same time you start logging. You should use logworks to monitor just a/f alone. Last edited by smooth1; 12-01-2012 at 01:44 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

11-25-2012, 01:23 AM	#161
smooth1 Registered User Join Date: Nov 2005 Location: Phoenix Posts: 255 My Ride: BMW FTW View My Garage	I've always been curious about what that software can do. I know nothing about it.

11-27-2012, 08:41 AM	#165
smooth1 Registered User Join Date: Nov 2005 Location: Phoenix Posts: 255 My Ride: BMW FTW View My Garage	There's a link to some unlimited DME free software in my first post, if that's more what you're looking for. Very cool stuff.

11-27-2012, 01:16 PM	#171
BimmerBrakes The Brake Newbie! Join Date: Feb 2010 Location: DFW, Tx Posts: 1,146 My Ride: 2005 ZHP BMW View My Garage	^ Check email

11-28-2012, 09:45 AM	#173
smooth1 Registered User Join Date: Nov 2005 Location: Phoenix Posts: 255 My Ride: BMW FTW View My Garage	Tested and working. Just need to record the values.

12-01-2012, 12:39 PM	#174
hassmaschine Registered User Join Date: Sep 2011 Location: Ferndale, WA Posts: 198 My Ride: '91 325ix View My Garage	maybe I'm missing something, I couldn't find anywhere to connect to the LC-1? I hooked it up and it recognized the serial port but that's it. of course I should probably check that the 2.5mm stereo plug is still attached to the controller, lol. will it work without a DME hooked up?

12-01-2012, 02:47 PM	#176
hassmaschine Registered User Join Date: Sep 2011 Location: Ferndale, WA Posts: 198 My Ride: '91 325ix View My Garage	ah, yeah, I just wanted to "test" it. I can datalog with my ECU if I need to, but eventually I'll have the LC-1 paired with MSS54.

12-01-2012, 04:23 PM	#177
smooth1 Registered User Join Date: Nov 2005 Location: Phoenix Posts: 255 My Ride: BMW FTW View My Garage	It's in the software area if you want to grab it.