ANGEL EYES 325i 2004 - Page 2

umnitza · 12-18-2012, 10:55 AM

There are no opaque options for the 2004 coupe units. You can if you wish make them opaque. If you don't want to see the gaps, then your best choice is the Orion V4, that is an option.

erice46 · 12-18-2012, 11:09 AM

What kind of angel eyes will fit depot projectors

umnitza · 12-18-2012, 11:16 AM

Orion V2 and V4 do a very good job.

erice46 · 12-18-2012, 11:20 AM

I have i think v2s and they dont fit they are too small!!

WDE46 · 12-18-2012, 11:33 AM

Quote:

Originally Posted by umnitza

There are no opaque options for the 2004 coupe units. You can if you wish make them opaque. If you don't want to see the gaps, then your best choice is the Orion V4, that is an option.

Do you have photos of the V4 on a 2004+ E46 coupe? What gap are you referring to? The gap between the halo and the reflector bowl/projector?

umnitza · 12-18-2012, 11:40 AM

You stated that you don't like to see the individual LED. Those LED are not visible if you have a lot of them to make the ring appear uniform (up close only).

The photos of the V4 or the V2 will not look any different when turned on and on the car.
This is a good photo comparison of the two products:

Orion V2 on the left.

WDE46 · 12-18-2012, 11:43 AM

Quote:

Originally Posted by umnitza

You stated that you don't like to see the individual LED. Those LED are not visible if you have a lot of them to make the ring appear uniform (up close only).

The photos of the V4 or the V2 will not look any different when turned on and on the car.
This is a good photo comparison of the two products:

Orion V2 on the left.

That's a good improvement. Am I correct in saying that the facelift coupe halos are 360 degree surrounds with no break like the other ones (shown here)?

umnitza · 12-18-2012, 11:46 AM

yes, they are a full 360 degrees with no horseshoe.

rambo10 · 12-29-2012, 12:36 PM

Ok, nowt that I received my angeleyes, I heard that I would need to change my gasket once I open the headlights.. Is that important ? Will that cause humidity ??

Solidjake · 12-29-2012, 01:44 PM

Use a heatgun to warm up the edges of the lens to make the glue soft and pull it apart. When you are ready to put it back in warm up the edges of the lens and lights and add some silicon and put it together.

rambo10 · 12-31-2012, 12:20 PM

Quote:

Originally Posted by Solidjake

Use a heatgun to warm up the edges of the lens to make the glue soft and pull it apart. When you are ready to put it back in warm up the edges of the lens and lights and add some silicon and put it together.

Allright thx man, imma do this and post pictures of the result

bmwm330cie46 · 02-18-2013, 02:45 PM

Quote:

Originally Posted by umnitza

You stated that you don't like to see the individual LED. Those LED are not visible if you have a lot of them to make the ring appear uniform (up close only).

The photos of the V4 or the V2 will not look any different when turned on and on the car.
This is a good photo comparison of the two products:

Orion V2 on the left.

mine are the ones on the left when i paid for v4 ??? waz up umnitza

tiag_$edan · 02-21-2013, 01:26 AM

Are the multi color any good?

12-18-2012, 10:55 AM	#21
umnitza 877•486•6489 Join Date: Aug 2002 Location: East Bay, CA Posts: 16,243 My Ride: E39M5, Sequoia View My Garage	There are no opaque options for the 2004 coupe units. You can if you wish make them opaque. If you don't want to see the gaps, then your best choice is the Orion V4, that is an option. __________________ Join Our Facebook! - Check Out Photos, Talk to Customers, Ask Us Questions! Call US 877 486 6489 Available: 9am-5pm M-F

12-18-2012, 11:16 AM	#23
umnitza 877•486•6489 Join Date: Aug 2002 Location: East Bay, CA Posts: 16,243 My Ride: E39M5, Sequoia View My Garage	Orion V2 and V4 do a very good job. __________________ Join Our Facebook! - Check Out Photos, Talk to Customers, Ask Us Questions! Call US 877 486 6489 Available: 9am-5pm M-F

12-18-2012, 11:40 AM	#26
umnitza 877•486•6489 Join Date: Aug 2002 Location: East Bay, CA Posts: 16,243 My Ride: E39M5, Sequoia View My Garage	You stated that you don't like to see the individual LED. Those LED are not visible if you have a lot of them to make the ring appear uniform (up close only). The photos of the V4 or the V2 will not look any different when turned on and on the car. This is a good photo comparison of the two products: Orion V2 on the left. __________________ Join Our Facebook! - Check Out Photos, Talk to Customers, Ask Us Questions! Call US 877 486 6489 Available: 9am-5pm M-F

12-18-2012, 11:46 AM	#28
umnitza 877•486•6489 Join Date: Aug 2002 Location: East Bay, CA Posts: 16,243 My Ride: E39M5, Sequoia View My Garage	yes, they are a full 360 degrees with no horseshoe. __________________ Join Our Facebook! - Check Out Photos, Talk to Customers, Ask Us Questions! Call US 877 486 6489 Available: 9am-5pm M-F

12-29-2012, 01:44 PM	#30
Solidjake Mod Join Date: May 2008 Location: NYC Posts: 19,902 My Ride: 2002 330i View My Garage	Use a heatgun to warm up the edges of the lens to make the glue soft and pull it apart. When you are ready to put it back in warm up the edges of the lens and lights and add some silicon and put it together. __________________ Follow my cross country drive to Bimmerfest West 2013 http://forum.e46fanatics.com/showthread.php?t=987217 Youtube - Electric Fan Swap/Aux Fan Removal - Projector Retrofit - E46 Bulb Guide

12-18-2012, 11:09 AM	#22
erice46 Registered User Join Date: May 2012 Location: riverside Posts: 337 My Ride: 2002 325I View My Garage	What kind of angel eyes will fit depot projectors

12-18-2012, 11:20 AM	#24
erice46 Registered User Join Date: May 2012 Location: riverside Posts: 337 My Ride: 2002 325I View My Garage	I have i think v2s and they dont fit they are too small!!

12-29-2012, 12:36 PM	#29
rambo10 Registered User Join Date: Dec 2012 Location: Montreal, Canada Posts: 41 My Ride: 325i 2004 sport-pack View My Garage	Ok, nowt that I received my angeleyes, I heard that I would need to change my gasket once I open the headlights.. Is that important ? Will that cause humidity ??

02-21-2013, 01:26 AM	#33
tiag_$edan Registered User Join Date: Feb 2012 Location: 90260 Posts: 124 My Ride: tiag $edan View My Garage	Are the multi color any good? __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: