E46 BMW Social Directory E46 FAQ 3-Series Discussion Forums BMW Photo Gallery BMW 3-Series Technical Information E46 Fanatics - The Ultimate BMW Resource BMW Vendors General E46 Forum The Tire Rack's Tire Wheel Forum Forced Induction Forum The Off-Topic The E46 BMW Showroom For Sale, For Trade or Wanting to Buy

Welcome to the E46Fanatics forums. E46Fanatics is the premiere website for BMW 3 series owners around the world with interactive forums, a geographical enthusiast directory, photo galleries, and technical information for BMW enthusiasts.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   E46Fanatics > Tuning & Tech > Lighting Forum

Lighting Forum
Angel Eyes, DDEs, lighted rings, Clear Turn Signals, LEDs, Xenon, HID, or Bi-Xenon. If it lights up and you want to discuss it, post here!

Thread Tools Search this Thread Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 12-24-2012, 12:54 AM   #1
Registered User
Join Date: Jun 2009
Location: Armadale, Melbourne, Australia
Posts: 193
My Ride: 1999-323i
License Plate Lights Out ! Check Light On!

I repaired the broken wires in the loom after the license plate lights check light came on...Looked for the fault for ages and no luck...tested the cables all along in the trunk area. Then yes, I found a broken earth/ground brown wire in the loom between the body and the trunk/boot lid. Inside the rubber corrugated sleeve. Just release the grommets in the body in 2 places and on in the trunk lid, peel back rubber exposing the cables slowly to expose all of the cables after removing the inner lining above the battery. Ease the cables out of the corrugated rubber sleeve. You will see damage in there, in the loom wiring. Bad BMW design. Then you'll have enough room to cut the wires and join them by just removing 1/2 " of insulation on each end of broken/damaged wire after cutting and twisting wires together. Before you do that, just slide on some shrink sleeve and heat it with a cigarette lighter...bingo...all fixed. The shrink sleeve hopefully being longer will give more strength to the wires in the bending motions of opening and closing the trunk lid.

I had 1 broken wire in the loom to the license plate lights...4 other nearly broken through and 3 or so others with cracks in the insulation. So I repaired the damaged lot by cutting and and splicing and sealing with shrink sleeve.

You'll see the red shrink wrap in photo...1 wire hasn't been heated as yet and you can see the splice.
Cost me $7 only for the shrink sleeve. That's all...no soldering. Took about 2 hours.
Attached Thumbnails
Click image for larger version

Name:	IMG_4521.jpg
Views:	643
Size:	135.4 KB
ID:	483223  
1999-323i Steel Grey, black leather, CD stacker, tinted windows, reversing radar, sunroof and Pirellis on M-Sport 17" alloys, 245 mm wide on rear and 225 mm wide on front.

Colin Boucher

Last edited by figjam911; 12-24-2012 at 12:57 AM.
figjam911 is offline   Reply With Quote
Ads by Google

Guests, get your FREE E46Fanatics.com membership to remove this ad.

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Censor is ON

All times are GMT -5. The time now is 07:45 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
(c) 1999 - 2016 performanceIX Inc - privacy policy - terms of use