|
|
|
|
||||||
|
Suspension & Braking
Have some questions about suspension or brake setups for your E46 BMW? Get all your answers here! |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
01-19-2013, 12:57 PM
|
#1 |
|
Registered User
|
Question about HR race springs
I'm interested in putting HR race springs on my 323 Ci that already has the sport suspension. Apart from the springs and upgraded shocks/struts, I was curious if there was any other aspect of the suspension that should be addressed before lowering the car? The front end of my car already has new Meyle HD control arms and bushings (less than 2k miles on them). Wheels are the staggered 68's, so I think I should be good as far as rubbing goes. Could be wrong though because I have no experience in lowering a car. Help a novice out!
 Last edited by Blueandwhite85; 01-19-2013 at 01:53 PM. |
|
|
|
01-20-2013, 10:56 PM
|
#2 |
|
Registered User
|
Do it! You might want to check your upper strut mounts while your changing out your springs... And you might also look into your rear suspension bushings...
__________________
-Wilson
19in. CSL's-H&R race-CSL carbon fiber trunk  |
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
