* What did you do to/for your E46 today? * - Page 783

Mango · 02-05-2013, 12:56 PM

Quote:

Originally Posted by Solidjake

Haha, payback.

Mango, upload that vid or get banned

uploaded

serdar255 · 02-05-2013, 02:10 PM

Good stuff for my girl.

VALMONT · 02-05-2013, 02:18 PM

Quote:

Originally Posted by E46Mango

i will admit it is kind of weird to me.. very thick. i'm sure i'll get used to it

i hear this all the time

Mango · 02-05-2013, 02:38 PM

Quote:

Originally Posted by VALMONT

i hear this all the time

i made that one too easy...

djnekkon · 02-05-2013, 03:42 PM

Removed my good for nothing HID fogs...back to OEM. Finish my LED interior and my LED tails. I hope these two last a little longer.

Solidjake · 02-05-2013, 03:43 PM

Quote:

Originally Posted by djnekkon

Removed my good for nothing HID fogs...back to OEM.

THANK YOU!!

VALMONT · 02-05-2013, 03:58 PM

Quote:

Originally Posted by Solidjake

THANK YOU!!

ryannel2003 · 02-05-2013, 09:05 PM

Does anybody have the rear diff bushing tool I could rent? Got the parts ordered just need the one for the rear most bushing. Posted a thread in the Southeast section with no replies.

Oh and I ordered 4 new Hankook Ventus V2 Concept tires, flex disk, center support bearing and the rear diff bushing today.

RKiepper · 02-05-2013, 11:43 PM

Fuel filter is in!!

Took a bit if effort to blow through the old filter, the new Bosch unit had absolutely no resistance

Also, finally pulled off the heat shield from the passenger engine mount that has been vibrating against my eBay headers for some time.

Still rattling somewhere, but its nowhere near as annoying.

///MPR77 · 02-06-2013, 10:50 AM

Washed it, and inspected belts.
Will be replacing them soon

Click image for larger version

Name: uploadfromtaptalk1360169389158.jpg
Views: 64
Size: 105.3 KB
ID: 489556

tock172 · 02-06-2013, 10:53 AM

Quote:

Originally Posted by ///MPR77

Washed it, and inspected belts.
Will be replacing them soon

Attachment 489556

Are my old H&Rs installed?

Mango · 02-06-2013, 10:54 AM

Quote:

Originally Posted by ///MPR77

Washed it, and inspected belts.
Will be replacing them soon

Attachment 489556

that's the gangsta edition e46.

should get some style 68s dude

///MPR77 · 02-06-2013, 11:03 AM

Quote:

Originally Posted by tock172

Are my old H&Rs installed?

Yes they are

Quote:

Originally Posted by E46Mango

that's the gangsta edition e46.

should get some style 68s dude

I think of it more as a "punk rock" or "Johnny Cash" edition.

I do have recording/mixing gigs down in Watts, Compton, and Lynwood, and I do get the OGs saying "that's a down ass ride"

Edit: Would trade these 119s for 68's in a second.

tock172 · 02-06-2013, 11:05 AM

Quote:

Originally Posted by ///MPR77

Yes they are

Awesome! I have to admit, I do miss them. Maybe I'll miss them a little less once I install my sway bars. What shocks did you pair them with? Are you liking them?

diM3tri · 02-06-2013, 12:00 PM

:d

diM3tri · 02-06-2013, 12:02 PM

Double post sorry

///MPR77 · 02-06-2013, 12:15 PM

Quote:

Originally Posted by tock172

Awesome! I have to admit, I do miss them. Maybe I'll miss them a little less once I install my sway bars. What shocks did you pair them with? Are you liking them?

Yeah I'm definitely enjoying these, despite the fact that I am running them with Bilstein Tourings, which are not valved for these, but I just hadn't been able to justify buying the Koni adjustabales when these struts only had 10k miles on them.

Honestly, I haven't hit the bump stops once, while driving in the canyons, and the car feels planted and stable.

At the very worst these struts will blow out early, and then I will replace with Konis

I have got the strut replacement DIY down to an hour a side, I know its not super quick, but its really become an easy job for me, so I figured I would slap them in there, and see what happens.

I must say this set up doesn't feel as incorrect, as it is supposed to be...
a bit bumpy at low speed on bad graded roads, I will say.

I do expect them to be shot in another 30k based on theory, and then on to the "proper" setup.

RKiepper · 02-06-2013, 12:18 PM

So Khoalty finally shipped out the resistors for my turn signals...

Nearly 10 days after I placed and paid for the order, for 2 items they had in stock.

What a joke.

Blueandwhite85 · 02-06-2013, 01:10 PM

Quote:

Originally Posted by RKiepper

So Khoalty finally shipped out the resistors for my turn signals...

Nearly 10 days after I placed and paid for the order, for 2 items they had in stock.

What a joke.

So what exactly did you do to or for your E46 today? This isn't a vendor-bashing thread.

Back on topic, took it to work today so I could give it a nice wash on my break.

RKiepper · 02-06-2013, 01:23 PM

Quote:

Originally Posted by Blueandwhite85

So what exactly did you do to or for your E46 today? This isn't a vendor-bashing thread.

Back on topic, took it to work today so I could give it a nice wash on my break.

Bought resistors for my turn signals...

What the **** do you think I did for my E46 today?

:sigh:

02-05-2013, 02:10 PM	#15642
serdar255 Registered User Join Date: Sep 2010 Location: NJ Posts: 1,777 My Ride: '01 325ci / '90 325i View My Garage	Good stuff for my girl. Attached Thumbnails __________________ Want a handmade shift knob or custom vinyl stickers? PM me I'm sixteen and like cars with three pedals. My ever small company... http://stgfabricationandmolds.bigcartel.com/ www.facebook.com/StgFabricationAndMolds

02-05-2013, 03:42 PM	#15645
djnekkon Registered User Join Date: Oct 2006 Location: Paterson, New Jersey / Orlando Florida Posts: 15,773 My Ride: MB3ci Regensburg Bav View My Garage	Removed my good for nothing HID fogs...back to OEM. Finish my LED interior and my LED tails. I hope these two last a little longer. __________________ Hip hop southstyle vol 2

02-05-2013, 09:05 PM	#15648
ryannel2003 No more E46 guy Join Date: Apr 2012 Location: New Bern, NC Posts: 969 My Ride: n/a View My Garage	Does anybody have the rear diff bushing tool I could rent? Got the parts ordered just need the one for the rear most bushing. Posted a thread in the Southeast section with no replies. Oh and I ordered 4 new Hankook Ventus V2 Concept tires, flex disk, center support bearing and the rear diff bushing today. __________________ Facebook

02-06-2013, 12:00 PM	#15655
diM3tri Registered User Join Date: Apr 2012 Location: Fairfield CT Posts: 485 My Ride: 330ci + stg2 Scoobie View My Garage	:d Attached Thumbnails __________________ more pedals then doors. Last edited by diM3tri; 02-06-2013 at 12:02 PM.

02-06-2013, 12:02 PM	#15656
diM3tri Registered User Join Date: Apr 2012 Location: Fairfield CT Posts: 485 My Ride: 330ci + stg2 Scoobie View My Garage	Double post sorry Attached Thumbnails __________________ more pedals then doors. Last edited by diM3tri; 02-06-2013 at 12:02 PM.

02-05-2013, 11:43 PM	#15649
RKiepper Registered User Join Date: Feb 2011 Location: Linn, Missouri Posts: 1,554 My Ride: 1999 E46 328I x2 View My Garage	Fuel filter is in!! Took a bit if effort to blow through the old filter, the new Bosch unit had absolutely no resistance Also, finally pulled off the heat shield from the passenger engine mount that has been vibrating against my eBay headers for some time. Still rattling somewhere, but its nowhere near as annoying.

02-06-2013, 12:18 PM	#15658
RKiepper Registered User Join Date: Feb 2011 Location: Linn, Missouri Posts: 1,554 My Ride: 1999 E46 328I x2 View My Garage	So Khoalty finally shipped out the resistors for my turn signals... Nearly 10 days after I placed and paid for the order, for 2 items they had in stock. What a joke.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread: