Advice: 2000 bmw m3

Ecko · 02-15-2013, 09:30 PM

Hi
I've found an M3 with alright mileage, competitively priced (for the NZ market) and a good service history.

It's also built in November 2000.

http://bmwvin.com/?vin=JR00024&confirm_code=yngwh

There are a few things I'd like your input on.

Firstly, the build sheet says it has a "low compression engine" - what does this mean? A local BMW enthusiast said it's probably a mistake on the build sheet. I'll ask the dealer to confirm whether it is low compression or not when I get pre-purchase check but what is the LC engine?

Secondly, I was looking at the UUC short shifter kits, (http://www.turnermotorsport.com/p-12...it-e46-m3.aspx)

And it says that it fits 2001-2006 M3. Will this not fit the 2000 year or is this a mistake?

Any other points of interest on the car?

It has spec which I like:

Carbonschwarz Metallic paint
Cinnamon Nappa leather seats
6 Speed manual
Sunroof
Rear sunblind
CSL splitters
Carbon fog light covers

I'll be updating all the lights to facelift, and giving the car a general freshen up if I get it but I'd appreciate your input!

Note:
I am in New Zealand!

Alan · 02-15-2013, 09:39 PM

Its just a designation for your build sheet. Not the sign of any issue.

Note: US build sheets do not reflect this.

emax · 02-15-2013, 09:42 PM

2001 was the first year of this model, and the first ones were built in 2000.

Ecko · 02-15-2013, 09:46 PM

So the SSKs that say 2001+ will fit the car?

I suppose built 2000, register 2001 initially?

turbo_f22_pilot · 02-15-2013, 10:03 PM

Your part designation 2001-2006 is the model year designation, not the manufacture date.

Stiggles · 02-15-2013, 11:40 PM

ITT: OP is retarded.

Ecko · 02-15-2013, 11:42 PM

Quote:

Originally Posted by ac_2007

ITT: OP is retarded.

Thanks for creating such a welcoming environment.

Hacksaw · 02-16-2013, 08:22 PM

You pretty much sum this forum up lately.

Try http://www.m3forum.net

Usually a lot more welcoming than this forum has become.

Ecko · 02-16-2013, 08:23 PM

Quote:

Originally Posted by Hacksaw

You pretty much sum this forum up lately.

Try http://www.m3forum.net

Usually a lot more welcoming than this forum has become.

Was that directed at me summing up the forum or the ac_2007 gent?

emax · 02-17-2013, 10:06 AM

Quote:

Originally Posted by Ecko

So the SSKs that say 2001+ will fit the car?

I suppose built 2000, register 2001 initially?

Yes on the ssk, but you can call the vendor if you want to be sure. Since the e46 model ended before the M3 some list parts for 2001-2005 but they fit the 2006 also.

Here in the US we register based on model year not manufacture date. The first models are always released one year early.

choxor · 02-17-2013, 02:31 PM

SSK will fit. Cinnamon interior is really nice. Be sure to get the subframe checked.

Ecko · 02-19-2013, 01:10 AM

Quote:

Originally Posted by choxor

SSK will fit. Cinnamon interior is really nice. Be sure to get the subframe checked.

That particular car has now gone off my radar as it was a bit've a dog.
Got my eye on a Phoenix Yellow, 35,000kms (20k miles?), manual, no sunroof, cloth seats..

Main reason I'm lovin' it is because of the mileage!

choxor · 02-19-2013, 07:22 AM

Cloth interior is nice. Just be sure to get a PPI done or else you may inherit a costly mess.

Zettinger · 02-19-2013, 08:08 AM

Quote:

Originally Posted by Ecko

That particular car has now gone off my radar as it was a bit've a dog.
Got my eye on a Phoenix Yellow, 35,000kms (20k miles?), manual, no sunroof, cloth seats..

Main reason I'm lovin' it is because of the mileage!

This one?
http://www.trademe.co.nz/motors/used...-564076707.htm

I love the e9X wheels on it!!!

cak323i · 02-19-2013, 08:19 AM

Quote:

Originally Posted by Zettinger

This one?
http://www.trademe.co.nz/motors/used...-564076707.htm

I love the e9X wheels on it!!!

Looks like a really nice ///M

If that's the car you're looking at, good luck OP!

ChrisRedmon · 02-19-2013, 08:40 AM

Yes to the PY

What do you mean your going to facelift the car?......I hope you mean taillights only.

MathewM3 · 02-19-2013, 08:49 AM

Check maintenance history, especially rod bearing recall, Here in the U.S its SIB#11-04-04 LBL code 422 M3 S54 Conn rod bearing e46 M3. Also if you could have an inspection done including taking the valve cover off to inspect the Vanos hub. The first models of M3:s seems to have more problems with broken tabs

Ecko · 02-19-2013, 02:32 PM

I'll be having it PPId by a BMW Dealership.
Facelift lights only, should've clarified that

And yes, that's the one! You're onto it!

YYCBMW · 02-19-2013, 05:19 PM

Quote:

Originally Posted by emax

2001 was the first year of this model, and the first ones were built in 2000.

Just to confirm the above, I own a 2000 328CI and the build date was November 1999.

02-15-2013, 09:39 PM	#2
Alan Registered User Join Date: Jul 2002 Location: Maryland Posts: 2,987 My Ride: 2006 M3 View My Garage	Its just a designation for your build sheet. Not the sign of any issue. Note: US build sheets do not reflect this. __________________

02-15-2013, 09:42 PM	#3
emax Registered User Join Date: Feb 2010 Location: USA Posts: 170 My Ride: 06 M3 View My Garage	2001 was the first year of this model, and the first ones were built in 2000. __________________ '06 CB/IR w/SMG/NAV/HK/19" BBS RGR/Hankooks

02-15-2013, 10:03 PM	#5
turbo_f22_pilot Registered User Join Date: Dec 2009 Location: Mid-Atlantic Region Posts: 964 My Ride: 2 pedals - 2 paddles View My Garage	Your part designation 2001-2006 is the model year designation, not the manufacture date. __________________ In order to finish FIRST, you MUST first FINISH ! Joy is future proof Get your "M" on . . . Reading is FundaM3ntal CAR: 2003 TIAG Coupe / Blk Interior / SMG / HK Premium MODS: EU-CSL Coded / Macht Schnell intake / OEM CSL Wheels / OEM CSL Diffuser / Dinan Exhaust Full LED Conversion / HID fog / Aurora AE / RE RTAB FCAB BMWCCA NCC

02-19-2013, 07:22 AM	#13
choxor Fully Deeked Out Join Date: Nov 2010 Location: Atlanta, GA Posts: 2,940 My Ride: An Automobile View My Garage	Cloth interior is nice. Just be sure to get a PPI done or else you may inherit a costly mess. __________________

02-19-2013, 08:40 AM	#16
ChrisRedmon Registered User Join Date: May 2012 Location: Space Posts: 724 My Ride: 2002 PY ///M3 View My Garage	Yes to the PY What do you mean your going to facelift the car?......I hope you mean taillights only. __________________ ///M 2002 Phoenix Yellow E46 M3/Nappa

02-15-2013, 09:30 PM	#1
Ecko Registered User Join Date: Feb 2013 Location: New Zealand Posts: 58 My Ride: 2003 M3 View My Garage	Advice: 2000 bmw m3 Hi I've found an M3 with alright mileage, competitively priced (for the NZ market) and a good service history. It's also built in November 2000. http://bmwvin.com/?vin=JR00024&confirm_code=yngwh There are a few things I'd like your input on. Firstly, the build sheet says it has a "low compression engine" - what does this mean? A local BMW enthusiast said it's probably a mistake on the build sheet. I'll ask the dealer to confirm whether it is low compression or not when I get pre-purchase check but what is the LC engine? Secondly, I was looking at the UUC short shifter kits, (http://www.turnermotorsport.com/p-12...it-e46-m3.aspx) And it says that it fits 2001-2006 M3. Will this not fit the 2000 year or is this a mistake? Any other points of interest on the car? It has spec which I like: Carbonschwarz Metallic paint Cinnamon Nappa leather seats 6 Speed manual Sunroof Rear sunblind CSL splitters Carbon fog light covers I'll be updating all the lights to facelift, and giving the car a general freshen up if I get it but I'd appreciate your input! Note: I am in New Zealand!

02-15-2013, 09:46 PM	#4
Ecko Registered User Join Date: Feb 2013 Location: New Zealand Posts: 58 My Ride: 2003 M3 View My Garage	So the SSKs that say 2001+ will fit the car? I suppose built 2000, register 2001 initially?

02-15-2013, 11:40 PM	#6
Stiggles Registered User Join Date: Apr 2010 Location: Toronto, ON Posts: 5,796 My Ride: Was built Fri 13th View My Garage	ITT: OP is retarded.

02-16-2013, 08:22 PM	#8
Hacksaw Registered User Join Date: Nov 2012 Location: San Antonio Posts: 5 My Ride: 2002 Imola Red M3 View My Garage	You pretty much sum this forum up lately. Try http://www.m3forum.net Usually a lot more welcoming than this forum has become.

02-17-2013, 02:31 PM	#11
choxor Fully Deeked Out Join Date: Nov 2010 Location: Atlanta, GA Posts: 2,940 My Ride: An Automobile View My Garage	SSK will fit. Cinnamon interior is really nice. Be sure to get the subframe checked. __________________

02-19-2013, 08:49 AM	#17
MathewM3 Registered User Join Date: Jul 2012 Location: Dallas TX Posts: 10 My Ride: BMW M3 E46 View My Garage	Check maintenance history, especially rod bearing recall, Here in the U.S its SIB#11-04-04 LBL code 422 M3 S54 Conn rod bearing e46 M3. Also if you could have an inspection done including taking the valve cover off to inspect the Vanos hub. The first models of M3:s seems to have more problems with broken tabs Attached Thumbnails

02-19-2013, 02:32 PM	#18
Ecko Registered User Join Date: Feb 2013 Location: New Zealand Posts: 58 My Ride: 2003 M3 View My Garage	I'll be having it PPId by a BMW Dealership. Facelift lights only, should've clarified that And yes, that's the one! You're onto it!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: