Original 325ci e46 clutch and flywheel

Guy With A BMW · 06-04-2007, 10:24 PM

Hey guys,

I just put in UUC LTW flywheel and clutch combo....so my stock one is up forsale.

The clutch that came out (the one im selling) looked as thick as the one going in. It looked NEW.

The flyhweel is stock and probably needs to be buffed down.

Pressure plate is just that...looks very good.

Throw out bearing also looks amazing and is included.

Best offer!

armenchik619 · 02-22-2013, 08:42 PM

What do you mean the flywheel needs to be "buffed down" as you say?

06-04-2007, 10:24 PM	#1
Guy With A BMW Registered User Join Date: May 2005 Location: Toronto Posts: 536 My Ride: 2001 AW 325Ci View My Garage	Original 325ci e46 clutch and flywheel Hey guys, I just put in UUC LTW flywheel and clutch combo....so my stock one is up forsale. The clutch that came out (the one im selling) looked as thick as the one going in. It looked NEW. The flyhweel is stock and probably needs to be buffed down. Pressure plate is just that...looks very good. Throw out bearing also looks amazing and is included. Best offer! __________________ Mods: UUC LTW flywheel/M5 clutch, KW Coilovers, UUC swaybars, Dinan CAI, UUC TSE3 Exhaust, Dinan Stage2 Software, M-Tech 2, etc...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

02-22-2013, 08:42 PM	#2
armenchik619 Registered User Join Date: Apr 2012 Location: Glendale Posts: 6 My Ride: 1999 328i View My Garage	What do you mean the flywheel needs to be "buffed down" as you say?