FSR Turbo Manifolds Ready - Page 2

Commanderwiggin · 02-18-2013, 05:17 PM

Quote:

Originally Posted by Alex@FSR

We've been doing turbine housing wastegate mounts for ten years with great success on a variety of platforms.

Kit's are good to go for in house install and tune's!

Nice! So I get a ride next week?

mike@maximumpsi · 02-18-2013, 05:48 PM

Quote:

Originally Posted by Alex@FSR

We've been doing turbine housing wastegate mounts for ten years with great success on a variety of platforms.

Kit's are good to go for in house install and tune's!

I did one on my 530whp 2.2L Plymouth Horizon back in the day as well! It worked for GM with the grand national platform. I hope you didn't read my comment as negative, I think you guys have a great looking manifold/parts. We were going for a design to maximize transient response and bottom end power. Your turbine-mounted wg refreshed my memory of my Horizon's setup and solved our boost creep issues as well!

I look forward to some built motor, high boost E85 builds this year from multiple shops.

-Mike

v8 5 · 02-18-2013, 10:16 PM

me gusta.

Alex@FSR · 02-19-2013, 05:42 PM

Thanks guys! We are humbled by your interest.

All the best Mike, Kenton, everyone.

Dreikraft · 02-20-2013, 11:05 AM

nice work FSR. excited to see the kit in action

Commanderwiggin · 02-26-2013, 06:23 PM

Saw the work that FSR has been doing lately and I'm very impressed! Best ProEFI install bar none...can't even find it lol.
I encourage anyone in the area to stop by and check their shop out...great guys and great work.

MaverickM3 · 02-26-2013, 09:46 PM

^^^ I agree. Met the FSR guys today. Great guys. Clean shop. And that tubi mani, ftw.

02black330ci · 02-27-2013, 09:26 PM

^^ Damn, I missed out on this! One of these days I have to go out West.

Twin_Turbo_S54 · 02-28-2013, 03:07 AM

I would love to see dyno runs, on an independent dyno.

FSR vs. HPF

Whats the spool difference?

Power difference?

HPF manifold is a semi-tubular desing, FSR is a complete tubular design. I am curious.

323tom · 02-28-2013, 08:25 AM

I won't have back to back comparison but Sound Performance will be dumping my car with the FSR manifold next week most likely so we can compare with my steed speed setup as the only major engine mod I changed is the exhaust manifold so the dynos should show a decent comparison

Quote:

Originally Posted by Twin_Turbo_S54

I would love to see dyno runs, on an independent dyno.

FSR vs. HPF

Whats the spool difference?

Power difference?

HPF manifold is a semi-tubular desing, FSR is a complete tubular design. I am curious.

Providence · 03-03-2013, 04:01 AM

Quote:

Originally Posted by 323tom

I won't have back to back comparison but Sound Performance will be dumping my car with the FSR manifold next week most likely so we can compare with my steed speed setup as the only major engine mod I changed is the exhaust manifold so the dynos should show a decent comparison

Cant u do a dyno run before the install and log it ?

323tom · 03-03-2013, 12:39 PM

Too late the FSR manifold is already installed and they just got the os giken install kit from hpf so sometime this week SP should have some results!

Twin_Turbo_S54 · 03-03-2013, 01:32 PM

Quote:

Originally Posted by Providence

Cant u do a dyno run before the install and log it ?

Bro, we may look for similar dyno graphs. Similar to Tom's old setup and then compare.

Providence · 03-05-2013, 02:54 PM

Quote:

Originally Posted by Twin_Turbo_S54

Bro, we may look for similar dyno graphs. Similar to Tom's old setup and then compare.

Well bro u know I have been waitin for a long time to get my hands on a tubular manifold but I really wanna see some numbers first

BTW we have started the fuel surge kit and twin 044 install

BTW I just saw that u got urself one

MaverickM3 · 03-05-2013, 03:02 PM

We want some numbers Tom.

323tom · 03-05-2013, 03:18 PM

Me too lol

Quote:

Originally Posted by MaverickM3

We want some numbers Tom.

Twin_Turbo_S54 · 03-05-2013, 04:41 PM

Quote:

Originally Posted by Providence

Well bro u know I have been waitin for a long time to get my hands on a tubular manifold but I really wanna see some numbers first

BTW we have started the fuel surge kit and twin 044 install

BTW I just saw that u got urself one

Bro, good luck with the surge kit. Will hit your dyno to see what the single 67 mm does on dynamics

Providence · 03-05-2013, 10:39 PM

Quote:

Originally Posted by Twin_Turbo_S54

Bro, good luck with the surge kit. Will hit your dyno to see what the single 67 mm does on dynamics

Let me know when ,it is ur dyno 2 buddy

Dreikraft · 03-06-2013, 11:08 AM

prov - u switch to a 67mm?

Providence · 03-06-2013, 12:17 PM

Nope still on my billet 7168

02-18-2013, 10:16 PM	#23
v8 5 Registered User Join Date: Sep 2011 Location: New Jarzy, New Jarzy Posts: 274 My Ride: 6 speed BMW View My Garage	me gusta. __________________ Gutted with a Getrag

02-19-2013, 05:42 PM	#24
Alex@FSR Regional Sponsor Join Date: Sep 2012 Location: Montclair, Ca Posts: 24 My Ride: E46 View My Garage	Thanks guys! We are humbled by your interest. All the best Mike, Kenton, everyone. __________________ Alex @ FSR Motorsport Creations

02-26-2013, 06:23 PM	#26
Commanderwiggin Registered User Join Date: Jun 2010 Location: Calgary, Canada Posts: 3,461 My Ride: 800rwhp Turbo M3 View My Garage	Saw the work that FSR has been doing lately and I'm very impressed! Best ProEFI install bar none...can't even find it lol. I encourage anyone in the area to stop by and check their shop out...great guys and great work. __________________

02-27-2013, 09:26 PM	#28
02black330ci Registered User Join Date: Mar 2005 Location: ^^ E46FANATICS ^^ Posts: 1,836 My Ride: 05'M3, 03 996TT View My Garage	^^ Damn, I missed out on this! One of these days I have to go out West. __________________ Best ET 11.93 Best Trap 134

02-28-2013, 03:07 AM	#29
Twin_Turbo_S54 Registered User Join Date: Nov 2012 Location: Istanbul Posts: 287 My Ride: M3 View My Garage	I would love to see dyno runs, on an independent dyno. FSR vs. HPF Whats the spool difference? Power difference? HPF manifold is a semi-tubular desing, FSR is a complete tubular design. I am curious. __________________ 8 seconds 1/4 mile & sub 3 seconds 60-130 mph AWD M3X coming soon 4,23 s 60-130 mph E46 M3 TT 4,49 s 60-130 mph E36 M3 TT, 3,49 s coming soon RWD mode 8,45 s 60-130 mph 997 Turbo

02-20-2013, 11:05 AM	#25
Dreikraft Registered User Join Date: Jun 2008 Location: Alaska :( Posts: 668 My Ride: slow m3 View My Garage	nice work FSR. excited to see the kit in action

02-26-2013, 09:46 PM	#27
MaverickM3 Registered User Join Date: Oct 2008 Location: Savannah/L.A. Posts: 38 My Ride: gets Badge View My Garage	^^^ I agree. Met the FSR guys today. Great guys. Clean shop. And that tubi mani, ftw.

03-03-2013, 12:39 PM	#32
323tom Registered User Join Date: Mar 2008 Location: toronto Posts: 1,171 My Ride: Turbo 323 ;) View My Garage	Too late the FSR manifold is already installed and they just got the os giken install kit from hpf so sometime this week SP should have some results! __________________

03-05-2013, 03:02 PM	#35
MaverickM3 Registered User Join Date: Oct 2008 Location: Savannah/L.A. Posts: 38 My Ride: gets Badge View My Garage	We want some numbers Tom. __________________

03-06-2013, 11:08 AM	#39
Dreikraft Registered User Join Date: Jun 2008 Location: Alaska :( Posts: 668 My Ride: slow m3 View My Garage	prov - u switch to a 67mm?

03-06-2013, 12:17 PM	#40
Providence Registered User Join Date: Oct 2009 Location: Turkey Posts: 280 My Ride: HPF Stage 3 m3 View My Garage	Nope still on my billet 7168

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: