![]() |
![]() |
|
|
||||||
|
///M3 Forum
The BMW E46 ///M3 is the M version E46 and puts out an amazing 333 HP and 262 lb-ft of torque at stock specs! There are an amazing amount of modifications for both the coupe and convertible models so read up and get started modifying your cars today! |
![]() |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Registered User
|
hello everyone,
last summer while I'm parking to get somthing from the shop I heard some noise and the car has stopped I tried to start it again but it wont. I had to rent car to pull it and I found some oil beneth it . Please any one has the same issue now the transmission light is on and it wont start any more ![]() BMW E46 /2006 Last edited by mango79; 01-20-2013 at 03:53 AM. |
|
|
|
|
|
#2 |
|
Registered User
|
Salmon relay. Search it.
__________________
![]() -2003 M3 Vert -1967 Mini Cooper |
|
|
|
|
|
#3 |
|
Registered User
|
Yes search function is your friend. With that being said the DME cover is the black plastic lid in the engine bay upper left corner. Remove the torx and the relay is there its the pink" salmon"colored one.
__________________
![]() |Carbon Fiber Intake|AA GEN3|AC Strut Brace|Eibach/Koni's| |Victory UDP's|HPF Sub Frame Plates| PF Subframe Bushings|Rtab Limiters| |
|
|
|
|
|
#4 |
|
Registered User
|
this is good news I hope this is the problem, any one know the part number for this relay it will be helpful information. thanks Last edited by mango79; 01-21-2013 at 02:29 AM. |
|
|
|
|
|
#5 |
|
Registered User
|
I threw you a bone already. Use the search function here or on Google.
__________________
![]() |Carbon Fiber Intake|AA GEN3|AC Strut Brace|Eibach/Koni's| |Victory UDP's|HPF Sub Frame Plates| PF Subframe Bushings|Rtab Limiters| |
|
|
|
|
|
#6 |
|
Registered User
|
heres the part # 12631742690
and heres the link to the website that sells it http://www.ecstuning.com/BMW-E46-M3-...ssion/ES31912/ |
|
|
|
|
|
#7 |
|
Registered User
|
thanks all I will try it and let you know soon...
|
|
|
|
|
|
#8 |
|
Registered User
|
here is the update I bought the Salmon relay, changed it and nothing happened
. but I notice SMG oil tank is almost empty and the gears lamp is on on left side. Last edited by mango79; 03-08-2013 at 06:34 PM. |
|
|
|
|
|
#9 |
|
Registered User
|
|
|
|
|
|
|
#10 |
|
Registered User
|
Thanks but is that mean if I add some oil it will start again ?
|
|
|
|
|
|
#11 |
|
Registered User
|
You may have air in the system. but you could try just cycle the gears a few times although you wiil need to hook it up to a machine to get it bled properly
|
|
|
|
|
|
#12 |
|
Registered User
|
latest update : added some fresh oil CHF 11S the car still not starting. Is there some sensor detect that oil is min or system need to be reset ?
|
|
|
|
|
|
#13 |
|
Registered User
|
Are you able to cycle the gears? R-N-1-2 without starting can you hear the pump working if you can?
|
|
|
|
|
|
#14 |
|
Registered User
|
There is some noise when starting the first time but I'm not sure if it belongs to SMG Pump or Patrol Pump. yes I remember I tried to cycle N-1-2 there were fine
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|