Project: Useless E46 - Page 24

The_W_95 · 03-11-2013, 07:10 PM

Do you have a lot of rubbing?! I tried going all the way and ended up having rubber thrown into my face and all over the place.

ode_joy · 03-12-2013, 04:32 AM

You need to have stretched tyres and also a bit of camber on those wheels, in order not to rub...

The_W_95 · 03-12-2013, 06:50 AM

I have 205/45/18 on a 9.5

Fuxxo · 03-12-2013, 06:53 AM

that might be a problem, you should run I think 40 profile.. either 215/40 or 205/40 (I ran 205/40 on 8.5 with ET15 last year.. and that was pretty neat)

ode_joy · 03-12-2013, 07:47 AM

With /45, it's a "failed stretch", cause the tyre walls make a round stretch... It's almost the same that rolling with no stretch.

Mähks · 03-12-2013, 10:11 AM

Quote:

Originally Posted by The_W_95

I have 205/45/18 on a 9.5

215/35 ;p ir 205/35 xDDDDDD

latino1ny · 03-12-2013, 09:15 PM

Just read this entire thread from page 1, and I must say...... sub'd. I can't wait to see what else you do.

latino1ny · 03-16-2013, 07:50 PM

Useless, question for you. Which Camber plates are you running? (The blue ones that you pictured)

e46cruiser · 03-16-2013, 08:37 PM

Quote:

Originally Posted by latino1ny

Useless, question for you. Which Camber plates are you running? (The blue ones that you pictured)

Cosmos racing I think.

latino1ny · 03-16-2013, 10:08 PM

Quote:

Originally Posted by e46cruiser

Cosmos racing I think.

I was thinking that too. Just wanted to confirm if I was correct.

LoveBeingUseless · 03-18-2013, 02:23 PM

Quote:

Originally Posted by e46cruiser

Cosmos racing I think.

Quote:

Originally Posted by latino1ny

I was thinking that too. Just wanted to confirm if I was correct.

Cosmo racing indeed! Thank you sir!

chilone · 03-26-2013, 05:15 PM

Hey Austin, how are those Cosmo camber plates holding up? I'm considering getting some. Thanks

chilone · 03-27-2013, 11:12 AM

Actually does anyone have experience with the Cosmo Racing camber plates?

Think0rz · 03-27-2013, 11:48 AM

OP awesome build one of the best "stance" builds ever documented! Sub'd and will keep checking back for updates!

MrGL2 · 04-07-2013, 06:34 PM

Wow, been through the thread from page 1 and I gotta say you inspired me to work on my car.
Amazing attention to details and it shows !

I think I'm gonna pull the trigger on a set of Rokkor coils after seeing this.

LoveBeingUseless · 04-13-2013, 03:09 PM

Sorry for the lack of updates everyone! I've been putting my car on hold due to other places my money has had to go in my life. Finally got some new items to install on my car. Just got some LED lights to put in my door handles. Really looking forward to it! Gonna wire it all in, through the factory harness. I will provide lots of detail and pics as usual

DIY to come.

The lights are from Oznium. 4 chip Surface Mounted LED's 100% waterproof housing, prewired with resistors to run on 12v DC.

Thanks for all the nice comments by the way! I appreciate it

Wanted let you guy know you can follow my instagram @LoveBeingUseless if you want to know what I'm doing and not able to spend all my money on my car

LoveBeingUseless · 04-13-2013, 03:09 PM

Frode D · 04-15-2013, 12:16 PM

I stumbled upon this thread today, and I'm amazed by how you got this car looking! I love how low it sits and I really like the wheels!

e46ornothing · 04-24-2013, 06:51 PM

Quote:

Originally Posted by LoveBeingUseless

u have a pm sir.. haha

Schlag96 · 04-26-2013, 07:32 PM

Had to stop in for a few parts yesterday

Sorry I didn't have time to say hi!

03-11-2013, 07:10 PM	#461
The_W_95 Registered User Join Date: Jun 2012 Location: Georgia Posts: 219 My Ride: 2003 330i View My Garage	Do you have a lot of rubbing?! I tried going all the way and ended up having rubber thrown into my face and all over the place. Attached Thumbnails

03-12-2013, 04:32 AM	#462
ode_joy Registered User Join Date: May 2011 Location: Lisboa - Portugal Posts: 139 My Ride: E46 318td Compact View My Garage	You need to have stretched tyres and also a bit of camber on those wheels, in order not to rub... __________________ BMW 318td Compact E46 Kit

03-12-2013, 06:53 AM	#464
Fuxxo Registered User Join Date: Oct 2011 Location: Slovakia Posts: 246 My Ride: E46 330D Mpaket tour View My Garage	that might be a problem, you should run I think 40 profile.. either 215/40 or 205/40 (I ran 205/40 on 8.5 with ET15 last year.. and that was pretty neat) __________________ E46 330D Mpaket touring - Street Rocket.. Wheelslist.net: Your #1 OEM list of wheels! My Thread..

03-12-2013, 07:47 AM	#465
ode_joy Registered User Join Date: May 2011 Location: Lisboa - Portugal Posts: 139 My Ride: E46 318td Compact View My Garage	With /45, it's a "failed stretch", cause the tyre walls make a round stretch... It's almost the same that rolling with no stretch. __________________ BMW 318td Compact E46 Kit

03-12-2013, 09:15 PM	#467
latino1ny Registered User Join Date: Feb 2008 Location: Hampton Roads Posts: 1,809 My Ride: Debadged E46 View My Garage	Just read this entire thread from page 1, and I must say...... sub'd. I can't wait to see what else you do. __________________ Jet Black Debadged E46, VIS single sided CF hood, CF Grills, CF Roundels, Black Corners, Painted Reflectors, Smoked Sidemarkers, 20% Tint, Cross-drilled rotors, Axxis pads, 8K headlights, Khoalty AE's wired by remote, Smoked Eagle Eyes, painted Style 44's

03-12-2013, 06:50 AM	#463
The_W_95 Registered User Join Date: Jun 2012 Location: Georgia Posts: 219 My Ride: 2003 330i View My Garage	I have 205/45/18 on a 9.5

03-16-2013, 07:50 PM	#468
latino1ny Registered User Join Date: Feb 2008 Location: Hampton Roads Posts: 1,809 My Ride: Debadged E46 View My Garage	Useless, question for you. Which Camber plates are you running? (The blue ones that you pictured) __________________ Jet Black Debadged E46, VIS single sided CF hood, CF Grills, CF Roundels, Black Corners, Painted Reflectors, Smoked Sidemarkers, 20% Tint, Cross-drilled rotors, Axxis pads, 8K headlights, Khoalty AE's wired by remote, Smoked Eagle Eyes, painted Style 44's

03-26-2013, 05:15 PM	#472
chilone Registered User Join Date: Nov 2012 Location: Colorado Posts: 122 My Ride: 04 330xi, 97 Miata View My Garage	Cosmo Hey Austin, how are those Cosmo camber plates holding up? I'm considering getting some. Thanks

03-27-2013, 11:12 AM	#473
chilone Registered User Join Date: Nov 2012 Location: Colorado Posts: 122 My Ride: 04 330xi, 97 Miata View My Garage	Actually does anyone have experience with the Cosmo Racing camber plates?

03-27-2013, 11:48 AM	#474
Think0rz Registered User Join Date: Apr 2011 Location: Yonkers, NY Posts: 166 My Ride: 05 AW M3 View My Garage	OP awesome build one of the best "stance" builds ever documented! Sub'd and will keep checking back for updates! __________________

04-07-2013, 06:34 PM	#475
MrGL2 Registered User Join Date: Jun 2012 Location: Montreal Posts: 46 My Ride: 2000 323Ci View My Garage	Wow, been through the thread from page 1 and I gotta say you inspired me to work on my car. Amazing attention to details and it shows ! I think I'm gonna pull the trigger on a set of Rokkor coils after seeing this.

04-13-2013, 03:09 PM	#476
LoveBeingUseless Registered User Join Date: Oct 2011 Location: Southern California Posts: 213 My Ride: 2003 325i Sedan View My Garage	Sorry for the lack of updates everyone! I've been putting my car on hold due to other places my money has had to go in my life. Finally got some new items to install on my car. Just got some LED lights to put in my door handles. Really looking forward to it! Gonna wire it all in, through the factory harness. I will provide lots of detail and pics as usual DIY to come. The lights are from Oznium. 4 chip Surface Mounted LED's 100% waterproof housing, prewired with resistors to run on 12v DC. Thanks for all the nice comments by the way! I appreciate it Wanted let you guy know you can follow my instagram @LoveBeingUseless if you want to know what I'm doing and not able to spend all my money on my car __________________ Front:18x10 et12 Rear: 18x10 et20 Check Out My Build Thread: Project: Useless E46 Last edited by LoveBeingUseless; 04-13-2013 at 03:13 PM.

04-13-2013, 03:09 PM	#477
LoveBeingUseless Registered User Join Date: Oct 2011 Location: Southern California Posts: 213 My Ride: 2003 325i Sedan View My Garage	Last edited by LoveBeingUseless; 04-13-2013 at 03:11 PM.

04-15-2013, 12:16 PM	#478
Frode D Registered User Join Date: Jun 2009 Location: Kingdom of Norway Posts: 115 My Ride: '05 320cd View My Garage	I stumbled upon this thread today, and I'm amazed by how you got this car looking! I love how low it sits and I really like the wheels! __________________ - The small details make the big difference - Stratusgrey with a touch of: CSL \| H&R \| Umnitza \| Blaupunkt \| Simons \| Tint \| CarbonFibre

04-26-2013, 07:32 PM	#480
Schlag96 Slightly Modded ///Member Join Date: May 2012 Location: Ventura County, CA Posts: 538 My Ride: 1999 323i View My Garage	Had to stop in for a few parts yesterday Sorry I didn't have time to say hi! __________________ The Truth About E46Mango - Can you beat my top speed? - Definitive Pulley Guide Don't Let This Be You! - Click here to get the best price on your parts - Project List Last edited by Schlag96; 04-26-2013 at 07:33 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: