E46 BMW Social Directory E46 FAQ 3-Series Discussion Forums BMW Photo Gallery BMW 3-Series Technical Information E46 Fanatics - The Ultimate BMW Resource BMW Vendors General E46 Forum The Tire Rack's Tire Wheel Forum Forced Induction Forum The Off-Topic The E46 BMW Showroom For Sale, For Trade or Wanting to Buy

Welcome to the E46Fanatics forums. E46Fanatics is the premiere website for BMW 3 series owners around the world with interactive forums, a geographical enthusiast directory, photo galleries, and technical information for BMW enthusiasts.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   E46Fanatics > Tuning & Tech > The Tire Rack's Tire & Wheel Forum

The Tire Rack's Tire & Wheel Forum
Use this forum to discuss anything in relation to wheels to tires to offsets.
Sponsored by The Tire Rack

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 06-04-2013, 10:06 PM   #1
steveintheburgh
Registered User
 
Join Date: Mar 2009
Location: pittsburgh, pa
Posts: 183
My Ride: 2004 330Ci
Refinished Style 71s (Polished Lip) DIY Lots of Photos

Finally completed this project.
Paid $100.00 for the set - all 4 were pretty rough, 2 were rashed all the way around.
Maybe $50.00 in supplies including wax and polish for future use.
Plan on 4 hours per wheel

Tools:
Scraper
8mm Triple Square Socket - don't skimp on this...the screws are really tight and you don't need any stripping going on.
Socket Wrench (I used a breaker bar too)
Rubber Mallet
Fine File
Cloth wheel w/ drill attachment for polishing

Supplies:
Simple Green or equivalent
Klean-Strip Peeler Basecoat and Clearcoat Remover
WD-40
Sandpaper (I used 40 and 80 grit paper, Medium/Fine/Extra-Fine Sanding Blocks, then 1000, 1500, 2000 Grit Paper)
Polishing Compound (I used generic white)
Clay bar for the centers
Hand polish (Mothers Billet worked great)
Wheel wax or sealant

Here's what I started with....Pitted. Rashed, etc. etc.




Soaked the lips in WD40 overnight then started loosening the screws. Took an 8MM Triple square Bit and a breaker-bar because they were so tight. THESE SCREWS WIL BREAK SO TAKE YOUR TIME. Used a rubber mallet to seperate the center from the hoop.




Soaked and scrubbed both pieces (and the screws, actually) in simple green.

The centers turned out to be in decent shape. Clay bar, KLASSE, Poor Boys Sealant and Wheel Wax got me this result - I'd say a 8.5 out of 10



I went through the process of spraying the Klean-Strip, letting it sit for 5-10 min then scraping - 2 or 3 times. You're going to be sanding everything down so don't worry about scraping too much.



Filed down the rash to as smooth as possible w/ the file. (Thankfully a file did the trick, no fill required)


Start wet sanding. Get everything as consistent as possible before going to the next step. Use the 40 to get rid of ALL the discoloration from pitting or damage before moving on.

Here's after 40 grit


This is after 2000 grit


Polish: I used a few drill mounted polish wheels and basic white paste. 3 big pieces of advice. 1. Tape up the nut holding the wheel to the bit. The wheel slipped a few times on me and nicked the rim which called for re-doing that section. 2. Rake your wheel often. That gets rid of the metal shavings and old polish. 3. A little polish goes a long way. If you end up w/ black junk on the rim, you're using too much.

Here's after polish. I took them to a solid shine. I'm sure I could have gotten to a mirror finish w/ the right compounds. I opted not to, mainly because this is my daily driver and maintaining a mirror finish seems a bit much.


Used Mothers Billet by hand, Poor Boys Sealant and Wheel Wax before I put them back together.

I decided to not clearcoat as any flaking, rash etc would = redoing the entire wheel from step one. I'll be maintaining w/ hand polish and wax.

Reassembly: I'm too cool for a torque wrench so I went 1/4 past wrench tight w a breaker bar. Do so at your own risk.

Results:







$100.00 for 4 rough wheels
$50.00 in supplies
$120.00 for slightly used tires off of CL (I know-risky)
$60.00 to mount and balance

$330.00 plus maybe 4 hours per wheel for 8/10 summer set.
steveintheburgh is offline   Reply With Quote
Ads by Google

Guests, get your FREE E46Fanatics.com membership to remove this ad.
Old 06-04-2013, 11:59 PM   #2
YOnpds
Registered User
 
Join Date: Jan 2006
Location: California
Posts: 553
My Ride: E46
Very nice! Good job.
YOnpds is offline   Reply With Quote
Old 06-05-2013, 12:45 AM   #3
filipinoise
Registered User
 
Join Date: Jan 2012
Location: Daly City, CA
Posts: 308
My Ride: '02 325ci
These Style 71's turned out great! Huge improvement from when you first picked them up. Good work.
__________________
'02 325ci 5MT


I take pictures in the San Francisco Bay Area.
www.eluisphoto.com
filipinoise is offline   Reply With Quote
Old 06-05-2013, 09:09 AM   #4
BlaccDiamonds
Registered User
 
Join Date: Mar 2013
Location: Lowell, MA
Posts: 34
My Ride: 04 330Ci + 02 4.6is
Very nice!
I have a set also and was iffy about the center star being able to remove or not. I have refinished wheels before and I know the long process involved, but the end results always make me smile.

Question? Do you know the exact torque specs for the bolts? My last set of rims stated @ 12 pounds, but i also found that a few extra clicks after the torque bar sets makes me feel more comfortable.

I might even take them apart and have them re-barreled...for extra width since these are the only set I have now that's decent...hmmm

Last edited by BlaccDiamonds; 06-05-2013 at 09:09 AM.
BlaccDiamonds is offline   Reply With Quote
Old 06-05-2013, 09:11 AM   #5
BlaccDiamonds
Registered User
 
Join Date: Mar 2013
Location: Lowell, MA
Posts: 34
My Ride: 04 330Ci + 02 4.6is
Another question! Where did you get the BMW logo for the calipers from? I like that!
BlaccDiamonds is offline   Reply With Quote
Old 06-05-2013, 11:12 AM   #6
VMRWheels
Sponsor
 
VMRWheels's Avatar
 
Join Date: Sep 2004
Location: Anaheim, CA
Posts: 9,988
My Ride: 1:25 Scale Enzo
Send a message via AIM to VMRWheels Send a message via Yahoo to VMRWheels
Excellent work, those wheels look brand new!
__________________
Sales @ VMR | Wheels
Tel: 714-442-7916 | Email: sales@velocitymotoring.com

Facebook! | Flickr! | Blog! | Instagram!
New for 2014: V702 Multispoke | V810 Flow Form
VMRWheels is offline   Reply With Quote
Old 06-08-2013, 09:24 PM   #7
indoafro
Registered User
 
Join Date: May 2013
Location: nashville
Posts: 257
My Ride: 325ci
Refinished Style 71s (Polished Lip) DIY Lots of Photos

great diy!!!


Sent from BimmerApp mobile app
indoafro is offline   Reply With Quote
Old 06-08-2013, 09:48 PM   #8
Riverbmr3
Registered User
 
Join Date: May 2004
Location: H-town
Posts: 4,011
My Ride: slow 3
nice job
Riverbmr3 is offline   Reply With Quote
Old 06-11-2013, 08:49 AM   #9
jonel1225
Registered User
 
Join Date: Aug 2012
Location: Framingham Ma
Posts: 175
My Ride: 02 325ci
great diy! i was wondering what you would have had used to fill them with if needed?
__________________
Untitled
jonel1225 is offline   Reply With Quote
Old 06-17-2013, 12:01 PM   #10
Redline
Registered User
 
Redline's Avatar
 
Join Date: Dec 2009
Location: Florida
Posts: 2,194
My Ride: ///M3 Vert
I'd say 15-25 lb's are normal for this kind of wheel. I'm going to do 15 lb with blue loctite and see how that goes then go to 18 lb.

Tighten in a rotating 5 bolt star pattern.
__________________
k.

///M

Last edited by Redline; 06-17-2013 at 12:01 PM.
Redline is offline   Reply With Quote
Old 06-17-2013, 12:12 PM   #11
steveintheburgh
Registered User
 
Join Date: Mar 2009
Location: pittsburgh, pa
Posts: 183
My Ride: 2004 330Ci
@ Jonel1225 I probably would have filled per this DIY.
http://forum.e46fanatics.com/showthread.php?t=713071
This wouldve Required a paint job though.

@BlaccDiamonds
Tons of options on ebay
Here's an example.
http://www.ebay.com/itm/BMW-Brake-Ca...0aaefe&vxp=mtr
I painted the Calipers black, the Retainer Clips Silver then went w a simple decal on the all 4. I believe the rears took a smaller decal.
steveintheburgh is offline   Reply With Quote
Old 06-17-2013, 08:26 PM   #12
jonel1225
Registered User
 
Join Date: Aug 2012
Location: Framingham Ma
Posts: 175
My Ride: 02 325ci
Refinished Style 71s (Polished Lip) DIY Lots of Photos

Quote:
Originally Posted by steveintheburgh View Post
@ Jonel1225 I probably would have filled per this DIY.
http://forum.e46fanatics.com/showthread.php?t=713071
This wouldve Required a paint job though.
Great thank you!



Sent from BimmerApp mobile app
__________________
Untitled
jonel1225 is offline   Reply With Quote
Old 06-17-2013, 08:56 PM   #13
e46JAB
Registered User
 
Join Date: Jul 2005
Location: South Carolina
Posts: 1,842
My Ride: Titan over Tannin
Great job! Some of my favorite OE wheels.
__________________
e46JAB is offline   Reply With Quote
Old 10-07-2013, 06:04 PM   #14
EthirD
Registered User
 
Join Date: Jul 2013
Location: Littleton, Co
Posts: 41
My Ride: '04 ZHP, '07 X5
Old thread bump and newb question: would using the stripper on a wheel with the tire mounted cause issues for the tire? I have a 135 with serious paint peelage that needs stripped and repainted. I know I can mask the tire for paint, but wouldn't want to eat it alive.
__________________
BMW CCA Member #480924
EthirD is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Censor is ON





All times are GMT -5. The time now is 03:51 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use