E46 BMW Social Directory E46 FAQ 3-Series Discussion Forums BMW Photo Gallery BMW 3-Series Technical Information E46 Fanatics - The Ultimate BMW Resource BMW Vendors General E46 Forum The Tire Rack's Tire Wheel Forum Forced Induction Forum The Off-Topic The E46 BMW Showroom For Sale, For Trade or Wanting to Buy

Welcome to the E46Fanatics forums. E46Fanatics is the premiere website for BMW 3 series owners around the world with interactive forums, a geographical enthusiast directory, photo galleries, and technical information for BMW enthusiasts.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   E46Fanatics > Tuning & Tech > DIY: Do It Yourself

DIY: Do It Yourself
Post here to share or improve your wrench turning skills! All BMW E46 DIY tips, tales, and projects discussed inside. Learn to work on your car and know the right BMW parts you will need!

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 02-18-2014, 10:04 PM   #1
Dbills
Registered User
 
Join Date: Nov 2013
Location: NJ
Posts: 209
My Ride: 99' 328i
Engine Smoke Problem

Often when I drive my car the engine bay will start smoking and puts a bad smell through my vents. I initially thought that the smell was coming from engine coolant leaking out of my radiator and landing on hot parts thus smoking. But I have just put in a new radiator and the same thing is still happening. The car is running at the correct temperature too. It seems to me that the smoke is originating from under the cabin air filter. I am almost positive it is an oil leak but not sure where to start to repair the leak. Any help would be great!


Sent from BimmerApp mobile app
Dbills is offline   Reply With Quote
Ads by Google

Guests, get your FREE E46Fanatics.com membership to remove this ad.
Old 02-18-2014, 10:14 PM   #2
Sansho
Registered User
 
Join Date: Jun 2010
Location: CT
Posts: 1,875
My Ride: 2001 325i
First thing to check is the passenger side of the valve cover, as it's not unusual for oil to drip from there onto the exhaust manifold. Also get a mirror and check at the back of the valve cover gasket, closest to the passenger compartment. If that's what's leaking, a new valve cover gasket and rubber o-rings for the bolts around the valve cover are the minimum of what's needed. If you get a complete valve cover gasket set, it will include new gaskets that go around the spark plugs. Oh, while there, a great time to replace the spark plugs, if close to being time to change them.

I use BMW valve cover gaskets when I replace them. There have been issues with at least one other brand, where they start leaking after a short while. Also, you'll need some RTV sealant when replacing the valve cover gasket. There's an excellent DIY at Beisansystems.com under procedures, as part of the vanos replacement o-rings procedure.
__________________
.
Sansho is offline   Reply With Quote
Old 02-18-2014, 10:23 PM   #3
Dbills
Registered User
 
Join Date: Nov 2013
Location: NJ
Posts: 209
My Ride: 99' 328i
Thank you very much for the information! I have a valve cover gasket set and Besian vanos seals waiting to be installed. I just wanted to know if it could be something else so I can get it all done at once.


Sent from BimmerApp mobile app
Dbills is offline   Reply With Quote
Old 02-19-2014, 03:14 AM   #4
karitammi
Registered User
 
Join Date: Dec 2012
Location: Finland
Posts: 37
My Ride: 325 (E46) Cabrio
I'm curerntly working on oil filter housing gasket. My 325i engine is oily below the intake manifold up to gearbox! I blame oil filter housing gasget, even I started to fix CCV valve & hosing. See the thread:
. A good comment by "ssm1991" gives advice to check the oil filter housing gasget if engine is oily under intake manifold. I believe its hard leak to locate since engine can be somewhat dirty there anyway and the leak may occur only higher oil pressures (higher revs).

Last edited by karitammi; 02-19-2014 at 03:15 AM. Reason: typing error
karitammi is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Censor is ON





All times are GMT -5. The time now is 01:17 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use