|
|
|
|
||||||
|
Engine & Performance
Everything to make your car faster! Air intakes, superchargers, turbos, flywheel & clutch, differentials, chips, short shift kits, exhausts, etc..... |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
06-10-2004, 10:12 AM
|
#1 |
|
Rogue Engineering
|
***Rogue Exhaust *** $500 *** and trade of your stock exhaust
This exhaust has been on my car for 3000 miles. I need a trade of exhausts from the headers back being that my Rogue one is so well welded on theres no chance of me taking it off. Reason for selling: I am just changing the tips and getting another Rogue exhaust...This exhaust is clean and only a few months old. I will polish it and have it so it looks like new. Must be in the NY/NJ/PA/CT area and must meet at Rogue where the swap will be made...500 is a great deal in my opinion...new ones are 689 + shipping. Let me know if anyone is interested. This is the 2nd gen one that has the closer tips and is a little quieter. Not the one with the 3in thin rolled tips I have posted pics of. Let me know guys
__________________
2008 E92 M3 6MT
Alpine White / Fox Red/ Carbon Fiber |
|
|
|
07-16-2004, 08:02 AM
|
#2 |
|
Rogue Engineering
|
bump
__________________
2008 E92 M3 6MT
Alpine White / Fox Red/ Carbon Fiber |
|
|
|
|
07-21-2004, 12:14 PM
|
#3 |
|
Registered User
|
Bump for a good guy.
__________________
 |
|
|
|
|
07-21-2004, 12:35 PM
|
#4 |
|
Registered User
|
You can probably cut the rogue exhaust where it is welded, but then you would have to weld on your next exhaust, and the person who buys your current rogue would just have to weld it also
__________________
 |
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
