Anyone know if this deck would work?

DarrenE46 · 10-07-2004, 09:52 PM

I looking at a Rockford deck thats made by Denon. According to Rockford its a ISO-Side mount only. I have never done a deck install in my car so I dont know if this would work. Can someone please help me?

listener · 10-08-2004, 01:41 AM

It will work but will require some fabrication. That deck is designed to bolt into factory brackets on some Japanese cars (ISO mount). What that means is it comes with no "sleeve" like a typical DIN mount unit and no trim ring.

That's a really good sounding deck you are looking at. SoundDomain.com, right? They've got a KILLER price on that thing. Good luck with it.

DarrenE46 · 10-10-2004, 09:51 AM

What kind of fabrication would be involved?

ca1242 · 10-12-2004, 12:05 PM

Some brackets or drilling into the plastic frame that holds the radio. A competent installer should be able to handle it with no problem.

10-07-2004, 09:52 PM	#1
DarrenE46 Registered User Join Date: Jun 2004 Location: Orlando, FL Posts: 378 My Ride: '02 330ci View My Garage	Anyone know if this deck would work? I looking at a Rockford deck thats made by Denon. According to Rockford its a ISO-Side mount only. I have never done a deck install in my car so I dont know if this would work. Can someone please help me?

10-08-2004, 01:41 AM	#2
listener Registered User Join Date: Jan 2004 Location: Phoenix, AZ Posts: 86 My Ride: '03 330i ZHP View My Garage	It will work but will require some fabrication. That deck is designed to bolt into factory brackets on some Japanese cars (ISO mount). What that means is it comes with no "sleeve" like a typical DIN mount unit and no trim ring. That's a really good sounding deck you are looking at. SoundDomain.com, right? They've got a KILLER price on that thing. Good luck with it. __________________ UUC Big Boy Clutch Stop/Sway Barbarians Dinan CAI/Strut Brace Rogue Octane SSK/Transmission Mounts/Power Pullies BMW Aluminum Pedals PIAA Bulbs Bimmerfreak Black-out Grill Valentine V1

10-12-2004, 12:05 PM	#4
ca1242 Registered User Join Date: Aug 2003 Location: Springfield, VA Posts: 7,629 My Ride: 2003 330i View My Garage	Some brackets or drilling into the plastic frame that holds the radio. A competent installer should be able to handle it with no problem. __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

10-10-2004, 09:51 AM	#3
DarrenE46 Registered User Join Date: Jun 2004 Location: Orlando, FL Posts: 378 My Ride: '02 330ci View My Garage	What kind of fabrication would be involved?