18" Dtm kruez 10 (NY)

TheRealM3RACER · 11-09-2004, 02:59 PM

I have a set of Dtm Kruez 10's for sale. The wheels have a polished lip (clear coated) with painted gun metal centers. The set up is staggered with 18x8 in front and 18x9 in the rear. The 2 rear rims have small bends on the inside edges, wheels hold air without a problem. They have SO3's mounted on them. Tires have a little more than 50% of their life.

Looking to get $1700 for the setup, willing to ship at buyers expense. I'm located in metro NY.

Thanks
Jason

TheRealM3RACER · 11-10-2004, 06:45 PM

^

amitv85 · 11-11-2004, 10:25 AM

what will these fit without spacers or problems?

TheRealM3RACER · 11-11-2004, 07:48 PM

These fit a E36 and E46 non m3 without any use of spacers. On my E36 I had to use a hammer on the inside fender to create clearance. On the e46 should be no problem as the wheel wells are larger.

Mpowered · 11-11-2004, 07:58 PM

I bought a set from an E36 M3, so i just wanted to chime in...

They did fit my car, but they looked funny as the offset was wrong. they went inwards on the rears. I had them sent to iforged to have the barrels taken off and re-welded so that they would fit the E46 M3. However, they WILL fit an E46 non-M, the offset is correct.

11-09-2004, 02:59 PM	#1
TheRealM3RACER Registered User Join Date: Sep 2004 Location: WHere the hammers rung, news camera never come Posts: 14 My Ride: 98 M3 View My Garage	18" Dtm kruez 10 (NY) I have a set of Dtm Kruez 10's for sale. The wheels have a polished lip (clear coated) with painted gun metal centers. The set up is staggered with 18x8 in front and 18x9 in the rear. The 2 rear rims have small bends on the inside edges, wheels hold air without a problem. They have SO3's mounted on them. Tires have a little more than 50% of their life. Looking to get $1700 for the setup, willing to ship at buyers expense. I'm located in metro NY. Thanks Jason Attached Thumbnails

11-11-2004, 10:25 AM	#3
amitv85 ROI-ndian Join Date: Dec 1969 Location: NYC Posts: 1,527 My Ride: is oOoOoUT View My Garage	what will these fit without spacers or problems? __________________ Dave Moss: What's your name? Blake: F*k you. That's my name. Blake: You know why, mister? 'Cause you drove a Hyundai to get here tonight, I drove an eighty thousand dollar BMW. That's* my name

11-11-2004, 07:58 PM	#5
Mpowered Crazy Boy Join Date: Apr 2002 Location: Dallas, TX Posts: 1,379 My Ride: 02 M3 View My Garage	I bought a set from an E36 M3, so i just wanted to chime in... They did fit my car, but they looked funny as the offset was wrong. they went inwards on the rears. I had them sent to iforged to have the barrels taken off and re-welded so that they would fit the E46 M3. However, they WILL fit an E46 non-M, the offset is correct. __________________ 2002 M3

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

11-10-2004, 06:45 PM	#2
TheRealM3RACER Registered User Join Date: Sep 2004 Location: WHere the hammers rung, news camera never come Posts: 14 My Ride: 98 M3 View My Garage	^

11-11-2004, 07:48 PM	#4
TheRealM3RACER Registered User Join Date: Sep 2004 Location: WHere the hammers rung, news camera never come Posts: 14 My Ride: 98 M3 View My Garage	These fit a E36 and E46 non m3 without any use of spacers. On my E36 I had to use a hammer on the inside fender to create clearance. On the e46 should be no problem as the wheel wells are larger.