Image Dynamics sub

PfCxM3 · 12-11-2004, 01:41 AM

anybody on the forum got these subs?? does these sub have good SQ? what model should i look for?

rcurley55 · 12-11-2004, 01:55 AM

Quote:

Originally Posted by PfCxM3

anybody on the forum got these subs??

yes

Quote:

does these sub have good SQ?

yes

Quote:

what model should i look for?

depends on what you want

PfCxM3 · 12-11-2004, 03:42 AM

i dont want something that has too much bass...looking for more SQ..

rcurley55 · 12-11-2004, 10:41 AM

Quote:

Originally Posted by PfCxM3

i dont want something that has too much bass...looking for more SQ..

Any of their woofers will work for you - all are sq drivers imo. 1 IDMAX should have about the same ouput as a pair of IDQ's. ID's a bit more output then IDQ's down low. ID's require a bit more airspace then IDQ's and a single IDMAX takes about the same airspace as a pair of IDQ's, but the driver's mounting depth is at least 8".

So, depending on what kind of power you have, that should get you started. All drivers work well sealed and ported. The ID and IDMAX are better suited for IB then the IDQ's.

Personally, I run a pair of IDQ12's;

low · 12-11-2004, 10:54 PM

Quote:

Originally Posted by rcurley55

yes

yes

depends on what you want

what he said

and i run dual 10IDMAXes

kb756 · 12-12-2004, 02:38 AM

i have a pair of idq12 and they sound great. theyre sealed and the sq is awesome. if u want sound quality, use an infinite baffle setup using the trunk as the box.

PfCxM3 · 12-12-2004, 04:21 AM

Quote:

Originally Posted by kb756

i have a pair of idq12 and they sound great. theyre sealed and the sq is awesome. if u want sound quality, use an infinite baffle setup using the trunk as the box.

will it fit in converitbles?

learthworml · 12-12-2004, 05:35 PM

The only ID sub I would use is an IDMAX. I guess you could port IDQ's or ID's, but still not my cup of tea. I do not think the IDQ's or ID's have enough low end. They arent as extended as the larger format subs.

bigjae1976 · 12-12-2004, 11:13 PM

Quote:

Originally Posted by rcurley55

Any of their woofers will work for you - all are sq drivers imo. 1 IDMAX should have about the same ouput as a pair of IDQ's. ID's a bit more output then IDQ's down low. ID's require a bit more airspace then IDQ's and a single IDMAX takes about the same airspace as a pair of IDQ's, but the driver's mounting depth is at least 8".

I've been reading that the V.3 IDs are just as good as the IDQs...just hearsay though.

The IDQ10s are a pretty impressive sub for $150. I have a trio...not I just need to build a box.

Its also a breath of fresh air from the cast baskets with 1000lb mirrored magnets. I think the IDQs look damned sexy.

PfCxM3 · 12-15-2004, 04:23 PM

if i get two 10' IDQs will a Alpine MRD-M501 be enough ?

rcurley55 · 12-15-2004, 04:26 PM

Quote:

Originally Posted by PfCxM3

if i get two 10' IDQs will a Alpine MRD-M501 be enough ?

assuming it does 500W - yes

itzphong · 12-16-2004, 06:25 AM

i got the idmax 12 inch in my 4runner running it with the 1200wat amp.... is better good.... but i think i shoulda got 2

12-11-2004, 01:41 AM	#1
PfCxM3 Poor M3 Owner Join Date: Nov 2002 Location: Arcadia , CA Posts: 709 My Ride: 02 M3 Cab View My Garage	Image Dynamics sub anybody on the forum got these subs?? does these sub have good SQ? what model should i look for? __________________ ~~SoCal 02+ m3 owner interested in a CAB PM me~~

12-11-2004, 03:42 AM	#3
PfCxM3 Poor M3 Owner Join Date: Nov 2002 Location: Arcadia , CA Posts: 709 My Ride: 02 M3 Cab View My Garage	i dont want something that has too much bass...looking for more SQ.. __________________ ~~SoCal 02+ m3 owner interested in a CAB PM me~~

12-12-2004, 05:35 PM	#8
learthworml mod-er-at-or-er Join Date: Jul 2002 Location: Dallas, TX Posts: 1,190 My Ride: 2011 Tundra Crewmax View My Garage	The only ID sub I would use is an IDMAX. I guess you could port IDQ's or ID's, but still not my cup of tea. I do not think the IDQ's or ID's have enough low end. They arent as extended as the larger format subs. __________________ mods: Kore Fox coilovers w/ 2.5" front lift , Fox Rear piggy backs w/ 1" rear lift, 305/65 18 BFG at/ko, TRD front Skid plate, console vault w/ HK p30 cocked and locked SQ sound system Seas Excel Mids, Seas Titanium Tweeters, JL Audio clean sweep, JL Audio 13tw5, Alpine PDX-4.150, Alpine PDX-1.600, PPI DCX-730 processor

12-15-2004, 04:23 PM	#10
PfCxM3 Poor M3 Owner Join Date: Nov 2002 Location: Arcadia , CA Posts: 709 My Ride: 02 M3 Cab View My Garage	if i get two 10' IDQs will a Alpine MRD-M501 be enough ? __________________ ~~SoCal 02+ m3 owner interested in a CAB PM me~~

12-16-2004, 06:25 AM	#12
itzphong Registered User Join Date: Aug 2004 Location: Middlesex County, NJ Posts: 356 My Ride: 01 330CIC, 02 745i View My Garage	i got the idmax 12 inch in my 4runner running it with the 1200wat amp.... is better good.... but i think i shoulda got 2 __________________ Iforged Equips 19x8.5, 19x10 -Toyo T1R 235/35/19 265/30/19 - K40 Front and Rear detector - Predator 6500K - Icelink - GruppeM Intake - Smoked front corners - JL 10W7 - JL 500/1 Want/BUY List Pioneer Z2 UUC TS3Exhaust? Fog light HID 6500K Painted Front reflectors Side clears LED taillights

12-12-2004, 02:38 AM	#6
kb756 Registered User Join Date: May 2003 Location: socali Posts: 345 My Ride: pinto View My Garage	i have a pair of idq12 and they sound great. theyre sealed and the sq is awesome. if u want sound quality, use an infinite baffle setup using the trunk as the box.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: