projector46 issue

duffsabot · 08-19-2006, 09:02 AM

Ok I installed the projector 46's on my car but have an issue with the angel eyes. The issue is where does the hookup for the activation wire go to? Is it in the fuse box? and to which terminal or do I tap it into a wire. Also I had the remote wire hooked up and working but then my dome lights went out, and they come on every once in a while. Help me please

duffsabot · 08-19-2006, 10:18 AM

Just checked the fuses, they are all good. cant figure why they are out, I was driving and and the left angel eye went out and they the dome went out and now no dome, or angel on both sides

umnitza · 08-19-2006, 10:36 AM

make sure to put your t-tap into the ECU for the main trigger

duffsabot · 08-19-2006, 07:30 PM

So here is the latest update on the problem. The fuses are blowing because of something in the left set of lights Probably the ballast. Do I need to get a whole new ballast or is this repairable??

08-19-2006, 09:02 AM	#1
duffsabot Registered User Join Date: Aug 2004 Location: arizona Posts: 33 My Ride: (american spec) 325i View My Garage	projector46 issue Ok I installed the projector 46's on my car but have an issue with the angel eyes. The issue is where does the hookup for the activation wire go to? Is it in the fuse box? and to which terminal or do I tap it into a wire. Also I had the remote wire hooked up and working but then my dome lights went out, and they come on every once in a while. Help me please

08-19-2006, 10:36 AM	#3
umnitza 877•486•6489 Join Date: Aug 2002 Location: East Bay, CA Posts: 16,243 My Ride: E39M5, Sequoia View My Garage	make sure to put your t-tap into the ECU for the main trigger __________________ Join Our Facebook! - Check Out Photos, Talk to Customers, Ask Us Questions! Call US 877 486 6489 Available: 9am-5pm M-F

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

08-19-2006, 10:18 AM	#2
duffsabot Registered User Join Date: Aug 2004 Location: arizona Posts: 33 My Ride: (american spec) 325i View My Garage	Just checked the fuses, they are all good. cant figure why they are out, I was driving and and the left angel eye went out and they the dome went out and now no dome, or angel on both sides

08-19-2006, 07:30 PM	#4
duffsabot Registered User Join Date: Aug 2004 Location: arizona Posts: 33 My Ride: (american spec) 325i View My Garage	So here is the latest update on the problem. The fuses are blowing because of something in the left set of lights Probably the ballast. Do I need to get a whole new ballast or is this repairable??