|
|
|
|
||||||
|
Forced Induction Forum Sponsored by Active Autowerke
Discuss supercharging, turbocharging and even nitrous and water injection here. Sponsored by Active Autowerke |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
10-04-2006, 04:02 AM
|
#1 |
|
Registered User
|
final checklist
to make it short, i just needed a couple reminders of what i should change out when i install boost
0. kit (check) car (check) 1. gaskets (check) 2. samco upgrade hoses (check) 3. 8psi pulley (i just need pulley and belt for this correct?, will still work with ASAtronic? 4. SPARK PLUGS iridium IK22s are the ones to get after a quick search 5. injectors? what size injector should i use, who sells them and how much? anything else i should grab before install? how about anything i need to install the ASAtronic with? have the small metal box thing that gets spliced into the ecu. not really sure how FPRs work TIA sorry if this info is readily available, very tired and thinking about cars > thining about schoolwork
__________________
 |
|
|
|
10-04-2006, 05:54 AM
|
#2 |
|
Man with No Name
|
are you buying a kit or going custom? if it's a kit, then injectors will be included.
__________________
BBS | ACS
  "if you wanna be king of the ring, this is the kind of car you should get" -M3 CSL "there's no replacement for displacement" - only BMW ///M |
|
|
|
|
10-05-2006, 12:39 AM
|
#3 | |
|
Registered User
|
Quote:
__________________
|
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
