![]() |
![]() |
|
|
||||||
|
Lighting Forum
Angel Eyes, DDEs, lighted rings, Clear Turn Signals, LEDs, Xenon, HID, or Bi-Xenon. If it lights up and you want to discuss it, post here! |
![]() |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Registered User
|
angel eye wiring confusion
searched but still unclear about some part.
Some ccfl kit only comes with 4 rings and 2 inverters/ballast which is ok since people said you don't need those harness/relay if not going to connect it to the ecu. So if I am just going to connect to the fogs/parking light I can just connect directly from the inverter? Do I need a fuse at least? (what kind) Also some people mentioned connecting the DDE to the footwell light and Acc power, are those the same thing? If not where to tap to the ACC source? thanks, |
|
|
|
|
|
#2 |
|
Past Site Sponsor
|
Yes you can just connect it to the parking lights and it will work, but I would still recomend you on gettting a hardness . We might have a used one around here somewhere. We can give it to you for free, just pay likefor shipping. Pm us
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|