![]() |
![]() |
|
|
||||||
|
Lighting Forum
Angel Eyes, DDEs, lighted rings, Clear Turn Signals, LEDs, Xenon, HID, or Bi-Xenon. If it lights up and you want to discuss it, post here! |
![]() |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Registered User
|
angel eyes setup problems...help please!
I got someone installed angel eyes for my E46 m3, but that guy who installed it for me set it up to only light up when you turn your low beam on(the one you use at night). How can I set up to it always on...even in day time...both day and night.can someone please help me...show me the pictures of the wiring connection...
thanks a lot |
|
|
|
|
|
#2 |
|
Registered User
|
If you drive with your fog lights on all the time like I do... wire it to the positive side of your fog lights.
|
|
|
|
|
|
#3 |
|
Registered User
|
what kit did you buy???
if you have the ones from jlevisw, then that red wire (switch to the relay) should be connected to the given wire in the ECU so that way they are given power when the car is on...... |
|
|
|
|
|
#4 |
|
Registered User
|
I bought it from HONG KONG...the brand is Mycarr
|
|
|
|
|
|
#5 |
|
Registered User
|
Just tap the positive wire to your fogs then... like I said above, if you don't mind driving with your fogs and halos. I always run this way, but I have 8000k HID fogs too.
__________________
![]() |
|
|
|
|
|
#6 |
|
Registered User
|
mine are connected to the ecu but still dont go on with ingniton, any ideas why?
|
|
|
|
|
|
#7 |
|
Registered User
|
I don't have fog lights on my car...best I have the CSL front bumper...
I want it my angel eyes to be set up as always on...even in auto or daytime driving..not just night time driving. where can I find a picture of the wirings on the ECU. |
|
|
|
|
|
#8 |
|
Registered User
|
If i hard wire my angel eyes to the car will they be on at all times and will they go on and off with my remote? thanks
|
|
|
|
|
|
#9 |
|
Registered User
|
Connected to the ecu I thought they were supposed to be on anytime you the car was unlocked, or when the engine was running. That way they would fade on when you unlocked your doors to get in. That's what I think it's supposed to do but I'll let someone who has the remote kit for it chime in.
__________________
![]() |
|
|
|
|
|
#10 |
|
Registered User
|
?
Who can help me...on my question...I don't know the ECU wiring for M3...I need a picture of it so I can setup my angel eyes always on. |
|
|
|
|
|
#11 |
|
Registered User
Join Date: Oct 2005
Location: Sugar Land, TX / Lincoln, NE
Posts: 2,806
My Ride: 2003 BMW M3 (TiAg)
|
yeah, tap it into the ECU and they'll be on whenever the car is on..
and also with the remote kit, you can tap it into your footwell lights... that way they'll come on/off with unlocking/locking the doors. check this DIY out.. http://www.fastm.com/m3/angeleyes.html
__________________
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|