OFFICAL list of fault codes ODBII code list - Page 3

Permaulj · 10-30-2006, 07:41 PM

Nice work. This is gonna help a lot of fanatics out.....

Thanks much, I just asked about codes couple days ago!!!

vids_blk323Ci · 01-22-2007, 02:44 PM

P0491 and P0492 >> http://forum.e46fanatics.com/showthread.php?t=433872

MarvelPhx · 01-22-2007, 02:58 PM

P0491 Secondary Air Injection System Insufficient Flow (Bank 1)
P0492 Secondary Air Injection System Insufficient Flow (Bank 2)

Sounds like the pump failed.

vids_blk323Ci · 01-22-2007, 03:00 PM

Also some good info at

http://www.troublecodes.net/OBD2/

dambro24 · 04-06-2007, 11:34 AM

WHAT DOES PO STAND FOR ? i use carsoft and i get error 106 vanos. there is a code on the list po106 is thi the same thing?

MarvelPhx · 04-06-2007, 12:27 PM

Quote:

Originally Posted by dambro24

WHAT DOES PO STAND FOR ? i use carsoft and i get error 106 vanos. there is a code on the list po106 is thi the same thing?

There is no P0106 code for your 323, but there is an internal BMW-FC 106 that returns:

'A' Camshaft Position Actuator Signal Low (Bank 1)
M52: 'B' Camshaft Position Actuator Tight or Jammed

That is probably what CarSoft is referring to.

id11 · 04-07-2007, 12:10 AM

For quick and easy reference, go to:

http://www.iequus.com/support/obd2_definitions.php

If it's not on there, just call them and ask a tech and they will tell you.
This is the MFG of the code reader that I own.

Elusive · 04-17-2007, 07:41 PM

Hey everyone has anyone gotton the code P1351, I know its suppose to be a misfire in C5 but, I reset the code and haven't had it come back up as a "service engine soon". So looking for the positive in everything, what do I need to do to fix the problem when it DOES come back??

id11 · 05-18-2007, 11:20 PM

I had the same problem about a year ago. It was the spark plug wires in my car.

dambro24 · 05-19-2007, 07:35 AM

Quote:

Originally Posted by MarvelPhx

There is no P0106 code for your 323, but there is an internal BMW-FC 106 that returns:

'A' Camshaft Position Actuator Signal Low (Bank 1)
M52: 'B' Camshaft Position Actuator Tight or Jammed

That is probably what CarSoft is referring to.

IT IS B WHAT DOES THIS MEAN , IT ALLWAYS says stiff.

how do i fix it?

DarkRyan323 · 06-02-2007, 09:32 AM

Anyone know what an E code means?

I got E1510 and P0303 on the autozone scanner. P0303 is cylinder 3 misfire and I don't know what the E code means. I know P1510 is idle speed control valve but I know it said E on the scan tool. Any ideas??

DarkRyan323 · 06-04-2007, 01:11 AM

^^^nevermind, i re-read the codes today and got P1510...but now i also have P1421 and P1423...bah!!! oh well i still love my bimmer

ghui99ss · 06-12-2007, 09:08 AM

Hey everyone, I just got the p0313 and p1093. I was wondering if anyone else ever had these codes and if its just a simple o2 sensor? Thanks

had a 2002Tii · 06-12-2007, 10:52 AM

This seem to be the place to ask for help. I have the following codes:
P0171 System too Lean (Bank 1)
P0174 System too Lean (Bank 2)
P0313 Misfire Detected With Low Fuel Level
P1083 Fuel Control Mixture Lean (Bank 1 Sensor 1)
P1085 Fuel Control Mixture Lean (Bank 2 Sensor 1)
P1345 Misfire Cylinder 2 With Fuel Cut-off
P1351 Misfire Cylinder 5 With Fuel Cut-off
P1353 Misfire Cylinder 6 With Fuel Cut-off

had a 2002Tii · 07-01-2007, 08:09 AM

I guess i should have started my own post about the misfire. However I replaced my fuel filter yesterday and the problem went away. I will give it a few days to see if any codes reappear.

kaotek323i · 08-22-2007, 07:32 PM

damnit i have a grip of codes like fuel trim control lean bank one and two! can any body help with diag procedures?

vids_blk323Ci · 09-19-2007, 07:14 AM

N E 1 know what a code P0000 means???

MarvelPhx · 09-19-2007, 12:22 PM

P0000 is usually the code that exists when everything works. Kinda like an -All Pass- report.

SmoKeNfLY · 10-01-2007, 03:56 PM

I just found out that my car was spitting out the P0070 code, which is an Ambient Air Temperature Sensor Circuit issue. Can anyone tell me what the part number is and where it is located so I can check whether or not I can salvage the existing part? Thanks, and oh pictures of where it is would be a GREAT help.

steveneth · 10-23-2007, 12:27 PM

I too have the PO313 code. Anyone that has a cure should could help us out here.

10-30-2006, 07:41 PM	#41
Permaulj Registered User Join Date: Jan 2006 Location: VA Posts: 23 My Ride: 325CI View My Garage	Incredible Nice work. This is gonna help a lot of fanatics out..... Thanks much, I just asked about codes couple days ago!!! __________________ YUNG1

01-22-2007, 02:44 PM	#42
vids_blk323Ci • DFW • Join Date: Dec 1969 Location: DFW Posts: 2,736 My Ride: JB 323Ci • SP • PP View My Garage	P0491 and P0492 >> http://forum.e46fanatics.com/showthread.php?t=433872 __________________ Dinan Stage I S/W \| ACS RSB \| ///M FSB \|UUC TMEs & Pulleys \|Ate Slotted Discs \| ScanGuageII \| RockyMounts MTB Carrrier \| OEM Rear Clears \| LED Euro City Lights & Rear Fogs \| Two-Tone Suede DIY \| ACS Pedals \| Bimmian Gauge Rings & M3 Face \| Smoked Frnt Corners w/ Luxeon LEDs \| EAS CF Roundels \| JLevi Ti CF trim \| Blk Suede shift/ e-brake boots \| ECS Smoked Frnt Bumper Reflectors \| DICE Duo

01-22-2007, 02:58 PM	#43
MarvelPhx www.my330i.com Join Date: Dec 1969 Location: Phoenix, AZ Posts: 1,929 My Ride: E92335i,04ZHP,99M3 View My Garage	P0491 Secondary Air Injection System Insufficient Flow (Bank 1) P0492 Secondary Air Injection System Insufficient Flow (Bank 2) Sounds like the pump failed. __________________

01-22-2007, 03:00 PM	#44
vids_blk323Ci • DFW • Join Date: Dec 1969 Location: DFW Posts: 2,736 My Ride: JB 323Ci • SP • PP View My Garage	Also some good info at http://www.troublecodes.net/OBD2/ __________________ Dinan Stage I S/W \| ACS RSB \| ///M FSB \|UUC TMEs & Pulleys \|Ate Slotted Discs \| ScanGuageII \| RockyMounts MTB Carrrier \| OEM Rear Clears \| LED Euro City Lights & Rear Fogs \| Two-Tone Suede DIY \| ACS Pedals \| Bimmian Gauge Rings & M3 Face \| Smoked Frnt Corners w/ Luxeon LEDs \| EAS CF Roundels \| JLevi Ti CF trim \| Blk Suede shift/ e-brake boots \| ECS Smoked Frnt Bumper Reflectors \| DICE Duo

04-06-2007, 11:34 AM	#45
dambro24 Registered User Join Date: Oct 2003 Location: nyny Posts: 582 My Ride: 330ci View My Garage	WHAT DOES PO STAND FOR ? i use carsoft and i get error 106 vanos. there is a code on the list po106 is thi the same thing? __________________

04-07-2007, 12:10 AM	#47
id11 Registered User Join Date: Feb 2007 Location: Stanwood, WA Posts: 2 My Ride: 1999 323i View My Garage	For quick and easy reference, go to: http://www.iequus.com/support/obd2_definitions.php If it's not on there, just call them and ask a tech and they will tell you. This is the MFG of the code reader that I own.

04-17-2007, 07:41 PM	#48
Elusive Registered User Join Date: Jan 2007 Location: So Cal Posts: 63 My Ride: '02 325i, '04 ZX-10R View My Garage	Hey everyone has anyone gotton the code P1351, I know its suppose to be a misfire in C5 but, I reset the code and haven't had it come back up as a "service engine soon". So looking for the positive in everything, what do I need to do to fix the problem when it DOES come back??

05-18-2007, 11:20 PM	#49
id11 Registered User Join Date: Feb 2007 Location: Stanwood, WA Posts: 2 My Ride: 1999 323i View My Garage	Misfire I had the same problem about a year ago. It was the spark plug wires in my car.

06-02-2007, 09:32 AM	#51
DarkRyan323 Banned Join Date: Feb 2006 Location: New Philadelphia, OH Posts: 1,803 My Ride: 2000 323i View My Garage	Anyone know what an E code means? I got E1510 and P0303 on the autozone scanner. P0303 is cylinder 3 misfire and I don't know what the E code means. I know P1510 is idle speed control valve but I know it said E on the scan tool. Any ideas??

06-04-2007, 01:11 AM	#52
DarkRyan323 Banned Join Date: Feb 2006 Location: New Philadelphia, OH Posts: 1,803 My Ride: 2000 323i View My Garage	^^^nevermind, i re-read the codes today and got P1510...but now i also have P1421 and P1423...bah!!! oh well i still love my bimmer

06-12-2007, 09:08 AM	#53
ghui99ss Registered User Join Date: Dec 2006 Location: Cottage Grove, MN Posts: 28 My Ride: 2001 bmw 325i View My Garage	Hey everyone, I just got the p0313 and p1093. I was wondering if anyone else ever had these codes and if its just a simple o2 sensor? Thanks

06-12-2007, 10:52 AM	#54
had a 2002Tii Registered User Join Date: Jan 2007 Location: Maryland Posts: 10 My Ride: 03 330Ci View My Garage	This seem to be the place to ask for help. I have the following codes: P0171 System too Lean (Bank 1) P0174 System too Lean (Bank 2) P0313 Misfire Detected With Low Fuel Level P1083 Fuel Control Mixture Lean (Bank 1 Sensor 1) P1085 Fuel Control Mixture Lean (Bank 2 Sensor 1) P1345 Misfire Cylinder 2 With Fuel Cut-off P1351 Misfire Cylinder 5 With Fuel Cut-off P1353 Misfire Cylinder 6 With Fuel Cut-off

07-01-2007, 08:09 AM	#55
had a 2002Tii Registered User Join Date: Jan 2007 Location: Maryland Posts: 10 My Ride: 03 330Ci View My Garage	I guess i should have started my own post about the misfire. However I replaced my fuel filter yesterday and the problem went away. I will give it a few days to see if any codes reappear.

08-22-2007, 07:32 PM	#56
kaotek323i Registered User Join Date: Feb 2007 Location: phoenix, az Posts: 421 My Ride: red 1999 323i View My Garage	damnit i have a grip of codes like fuel trim control lean bank one and two! can any body help with diag procedures?

09-19-2007, 07:14 AM	#57
vids_blk323Ci • DFW • Join Date: Dec 1969 Location: DFW Posts: 2,736 My Ride: JB 323Ci • SP • PP View My Garage	N E 1 know what a code P0000 means??? __________________ Dinan Stage I S/W \| ACS RSB \| ///M FSB \|UUC TMEs & Pulleys \|Ate Slotted Discs \| ScanGuageII \| RockyMounts MTB Carrrier \| OEM Rear Clears \| LED Euro City Lights & Rear Fogs \| Two-Tone Suede DIY \| ACS Pedals \| Bimmian Gauge Rings & M3 Face \| Smoked Frnt Corners w/ Luxeon LEDs \| EAS CF Roundels \| JLevi Ti CF trim \| Blk Suede shift/ e-brake boots \| ECS Smoked Frnt Bumper Reflectors \| DICE Duo

09-19-2007, 12:22 PM	#58
MarvelPhx www.my330i.com Join Date: Dec 1969 Location: Phoenix, AZ Posts: 1,929 My Ride: E92335i,04ZHP,99M3 View My Garage	P0000 is usually the code that exists when everything works. Kinda like an -All Pass- report. __________________

10-01-2007, 03:56 PM	#59
SmoKeNfLY Registered User Join Date: Feb 2003 Location: San Francisco Posts: 1,186 My Ride: AW ///M3 & SLK350 View My Garage	I just found out that my car was spitting out the P0070 code, which is an Ambient Air Temperature Sensor Circuit issue. Can anyone tell me what the part number is and where it is located so I can check whether or not I can salvage the existing part? Thanks, and oh pictures of where it is would be a GREAT help. __________________ Feeler - Like My Car? Make an Offer

10-23-2007, 12:27 PM	#60
steveneth Registered User Join Date: Jul 2007 Location: El Paso, Texas Posts: 22 My Ride: 2001 330Ci View My Garage	I too have the PO313 code. Anyone that has a cure should could help us out here.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: