|
|
|
|
||||||
|
Bavarian Soundwerks' Mobile Electronics Forum
Have all your A/V and electronics questions answered here. Ipods, A/V, Radar Detectors Oh My! Sponsored by Bavarian Soundwerks |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
04-23-2003, 09:20 PM
|
#1 |
|
Registered User
|
bridge or series
if i was to run my amp bridged but put false wires on the other two terminals would that still work. my trunk is going to be pretty showy so i kinda want the wires there on the other two terminals.
__________________
 MECP Silver Cedia Level I |
|
|
|
04-23-2003, 11:41 PM
|
#2 |
|
Registered User
|
Yes it would still work, but make sure you tape off or cap the loose ends or you might wind up with a short.
Thats a good idea! I'm going to do that with some of my components. 
__________________
 Created 18 June 2002 |
|
|
|
|
04-24-2003, 12:08 PM
|
#3 |
|
Registered User
|
i think im going to do that with my cross overs also because i have only one input on the cross over but there are two input spots so i think im going to do it there also.
__________________
MECP Silver Cedia Level I |
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
