|
|
|
|
||||||
|
Lighting Forum
Angel Eyes, DDEs, lighted rings, Clear Turn Signals, LEDs, Xenon, HID, or Bi-Xenon. If it lights up and you want to discuss it, post here! |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
01-19-2008, 11:55 AM
|
#1 |
|
Registered User
|
screw in corners for pre-facelift
does anyone know where i can purchase screw in front corners for a pre-facelift sedan? i got a very good deal on oem bi-xenons headlights. i believe i need screw in corners to make it fit.
thanks! |
|
|
|
01-19-2008, 03:54 PM
|
#2 |
|
1.888.JLEVISW
|
These aren't made, pre-facelift corners are only made with clip style install mounts.
|
|
|
|
|
01-21-2008, 01:18 PM
|
#3 |
|
Registered User
|
I used my pre-facelift corners with a set of facellift Bi-xenon headlights. What I did was to glue a bit of plastic to the "clip" on the corner light, and drill a hole in it for the screw on the Bi-xenon lights.
I donīt have any pictures, so I hope you understand the procedure? Otherwise, PM me and I will try to explain it better  Best Regards Niclas |
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
