H&R Cupkit fitment with CSL wheels??

lioe46 · 08-18-2008, 09:04 PM

can i fit 18" csl with H&R cup kit?

Chris-TK · 08-19-2008, 12:26 AM

Do you have a coupe or sedan? Yes if you get the correct offsets and tires. Max tire width for a sedan is 255 and a coupe is 265. Are you getting a square setup, if so then 18x8.5 40mm offset will work perfectly. If you are going staggered with a 9.5 rear and a 255 or 264 you might need to roll your fenders.

btw...Worst thread topic title ever.

simsima325 · 08-19-2008, 09:37 AM

as long as u get wheels that are made for non-M, yes.

2nd, awful title. fixed for the n00b.

Arrows · 08-19-2008, 10:35 AM

Yes they will fit. I've personally had that setup before. If you have the right offsets and tire sizes you shouldn't have a problem. If you decide to do a staggered setup, you might have to roll your fenders to avoid rubbing with 2-3 people in the car.

Edison@JleviSW · 08-19-2008, 10:11 PM

Yep you can run that setup so long as you have rear ET45 wheels and nothing larger than a 255 rear tire.

dmisc · 08-27-2008, 04:47 AM

I have this cupkit and CSL 19's in the rear. i rub a little bit with fenders rolled, but I have 265's in the rear. 18's should be fine.

08-18-2008, 09:04 PM	#1
lioe46 Registered User Join Date: Sep 2007 Location: NY-hampton roads Posts: 308 My Ride: e46 View My Garage	H&R Cupkit fitment with CSL wheels?? can i fit 18" csl with H&R cup kit?

08-19-2008, 12:26 AM	#2
Chris-TK Registered User Join Date: Jun 2007 Location: Sacramento Posts: 16,308 My Ride: Mazda View My Garage	Do you have a coupe or sedan? Yes if you get the correct offsets and tires. Max tire width for a sedan is 255 and a coupe is 265. Are you getting a square setup, if so then 18x8.5 40mm offset will work perfectly. If you are going staggered with a 9.5 rear and a 255 or 264 you might need to roll your fenders. btw...Worst thread topic title ever. __________________ K.

08-19-2008, 09:37 AM	#3
simsima325 'a certain moderator' Join Date: Feb 2001 Location: Hyattsville, MD Posts: 36,639 My Ride: Honda Civic View My Garage	as long as u get wheels that are made for non-M, yes. 2nd, awful title. fixed for the n00b. __________________ -Brendan FS: 2004 Porsche 996 Turbo Cabriolet X50

08-19-2008, 10:35 AM	#4
Arrows Registered User Join Date: May 2006 Location: Santa Clara, CA Posts: 42,105 My Ride: 2000 323i. View My Garage	Yes they will fit. I've personally had that setup before. If you have the right offsets and tire sizes you shouldn't have a problem. If you decide to do a staggered setup, you might have to roll your fenders to avoid rubbing with 2-3 people in the car. __________________ Amit For Sale: Gauge Rings: http://forum.e46fanatics.com/showthread.php?t=630213

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

08-19-2008, 10:11 PM	#5
Edison@JleviSW 1.888.JLEVISW Join Date: Apr 2002 Location: Santa Clara Posts: 28,337 My Ride: BMW Duh View My Garage	Yep you can run that setup so long as you have rear ET45 wheels and nothing larger than a 255 rear tire.

08-27-2008, 04:47 AM	#6
dmisc Registered User Join Date: Dec 2007 Location: Next to the Freeway Posts: 10,689 My Ride: a car View My Garage	I have this cupkit and CSL 19's in the rear. i rub a little bit with fenders rolled, but I have 265's in the rear. 18's should be fine.