SES Codes

330izzle · 09-05-2008, 01:47 PM

i need help on trying to fix the two codes that are showing up, first is code P1447 which is saying Diagnostic Module Tank Leakage (DM-TL) Pump Too High During Switching (BMW). then the second one is P0369 Camshaft Position Sensor B Circuit Intermittent (Bank 1)... can someone please help me bcuz i'm a total noob and don't wanna take it into a dealership.

kentrob11 · 09-06-2008, 11:25 AM

I need the answer to this as well...

330izzle · 09-06-2008, 06:10 PM

cmon people...please help us!!

330izzle · 09-10-2008, 01:16 PM

help!

locodice · 09-10-2008, 04:20 PM

i did have P1449 ..1447-1449 its the same error pump too high or low..anyways ..the first thing you should check is the gas cap (maybe is not sit well or the cap is defected or old) try that its $15 at dealer..clear the code and hopefully will not come back if its comes back under 50 miles than u gotta get that DM_TL module replaced ..i guess i paid $350-360

.. but no more errors

..

330izzle · 09-11-2008, 12:49 PM

thanks for the help! one code down and one more to go!!

TheMadDutchman · 09-15-2008, 11:08 PM

Check the exhaust camshaft sensor connector for oil. If you find oil in the connector portion of the sensor you should replace it along with the o-ring. Don't get an aftermarket piece, dealer only. After the sensor is replaced, clean the electrical connector with some electrical contact cleaner.
Good luck!
Here is a pic of the location of the exhaust camshaft position sensor.

immigrant · 09-15-2008, 11:30 PM

check the elbow part of the intake hose

330izzle · 09-25-2008, 12:32 PM

thanks guys!! ill try both and see what happens...

09-05-2008, 01:47 PM	#1
330izzle Registered User Join Date: Jul 2008 Location: clovis, ca Posts: 127 My Ride: 2001 330i View My Garage	SES Codes i need help on trying to fix the two codes that are showing up, first is code P1447 which is saying Diagnostic Module Tank Leakage (DM-TL) Pump Too High During Switching (BMW). then the second one is P0369 Camshaft Position Sensor B Circuit Intermittent (Bank 1)... can someone please help me bcuz i'm a total noob and don't wanna take it into a dealership.

09-06-2008, 11:25 AM	#2
kentrob11 Registered User Join Date: Mar 2007 Location: Illinois Posts: 98 My Ride: 2001 BMW 330ci View My Garage	I need the answer to this as well... __________________ 2001 330ci

09-10-2008, 04:20 PM	#5
locodice Registered User Join Date: Aug 2007 Location: Brooklyn NY Posts: 201 My Ride: zhp View My Garage	DM-TL Module i did have P1449 ..1447-1449 its the same error pump too high or low..anyways ..the first thing you should check is the gas cap (maybe is not sit well or the cap is defected or old) try that its $15 at dealer..clear the code and hopefully will not come back if its comes back under 50 miles than u gotta get that DM_TL module replaced ..i guess i paid $350-360.. but no more errors.. __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

09-06-2008, 06:10 PM	#3
330izzle Registered User Join Date: Jul 2008 Location: clovis, ca Posts: 127 My Ride: 2001 330i View My Garage	cmon people...please help us!!

09-10-2008, 01:16 PM	#4
330izzle Registered User Join Date: Jul 2008 Location: clovis, ca Posts: 127 My Ride: 2001 330i View My Garage	help!

09-11-2008, 12:49 PM	#6
330izzle Registered User Join Date: Jul 2008 Location: clovis, ca Posts: 127 My Ride: 2001 330i View My Garage	thanks for the help! one code down and one more to go!!

09-15-2008, 11:08 PM	#7
TheMadDutchman Registered User Join Date: Aug 2008 Location: SoCal Posts: 21 My Ride: '04 330i ZHP View My Garage	Check the exhaust camshaft sensor connector for oil. If you find oil in the connector portion of the sensor you should replace it along with the o-ring. Don't get an aftermarket piece, dealer only. After the sensor is replaced, clean the electrical connector with some electrical contact cleaner. Good luck! Here is a pic of the location of the exhaust camshaft position sensor.

09-15-2008, 11:30 PM	#8
immigrant Registered User Join Date: Jan 2008 Location: Philadelphia, PA Posts: 556 My Ride: 2001 BMW 330CI View My Garage	check the elbow part of the intake hose

09-25-2008, 12:32 PM	#9
330izzle Registered User Join Date: Jul 2008 Location: clovis, ca Posts: 127 My Ride: 2001 330i View My Garage	thanks guys!! ill try both and see what happens...