Spring Hats

DutchMaster · 10-08-2008, 09:11 PM

Ok can someone tell me where i can buy the hats for a 2002 M3. I need them to install the suspension on my 323i thanks for the help.

Chris-TK · 10-09-2008, 11:50 AM

You could order them from Tischer at getbmwparts.com

TxZHP04 · 10-09-2008, 12:13 PM

You're going to put a stock M3 suspension on a 323? Let us know how that works out for you... I'm guessing you're not going to be too happy with the results. But then again, other than the potential increase in ride height, it's probably not much worse than some of the cheap coilovers other members put on their cars.

DutchMaster · 10-09-2008, 06:23 PM

Wait why do you say that i am not going to be too happy with the results the car stiffens up a lot. When i only had the back set on i could feel the difference. My other question is will the M3 front strut mounts fit on my car if they will that makes life a lot easier but if they dont what will i need to buy to get it to work Thanks for the help[

10-08-2008, 09:11 PM	#1
DutchMaster Registered User Join Date: Jul 2008 Location: Naples Posts: 18 My Ride: 1999 323i View My Garage	Spring Hats Ok can someone tell me where i can buy the hats for a 2002 M3. I need them to install the suspension on my 323i thanks for the help.

10-09-2008, 11:50 AM	#2
Chris-TK Registered User Join Date: Jun 2007 Location: Sacramento Posts: 16,308 My Ride: Mazda View My Garage	You could order them from Tischer at getbmwparts.com __________________ K.

10-09-2008, 12:13 PM	#3
TxZHP04 Registered User Join Date: Feb 2006 Location: DFW Posts: 5,732 My Ride: ESS TS2+ ZHP View My Garage	You're going to put a stock M3 suspension on a 323? Let us know how that works out for you... I'm guessing you're not going to be too happy with the results. But then again, other than the potential increase in ride height, it's probably not much worse than some of the cheap coilovers other members put on their cars. __________________ 04 IR 330i ZHP \| ESS TS2+ SC \| MagnaFlow "headers" \| KMS 3.64 LSD \| AST 4100 550/650\| APEX ARC-8 18x9 \| H&R front sway bar \| Vorshlag camber plates, RTAB limiters \| TMS subframe & swaybar reinforcements \| UUC SSK & DSSR \| UUC TM & TME \| BW motor mounts \| Dinan strut & shock tower bars \| vaio 4-bolt oil pump

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

10-09-2008, 06:23 PM	#4
DutchMaster Registered User Join Date: Jul 2008 Location: Naples Posts: 18 My Ride: 1999 323i View My Garage	Wait why do you say that i am not going to be too happy with the results the car stiffens up a lot. When i only had the back set on i could feel the difference. My other question is will the M3 front strut mounts fit on my car if they will that makes life a lot easier but if they dont what will i need to buy to get it to work Thanks for the help[